About Air Preparation
More
Wilkerson Modular Compressed Air Regulators
Adjust and maintain the pressure of your compressed air. All regulators are relieving style, so they exhaust when the downstream pressure exceeds the set pressure. Install in your air line after filters.
Mounting brackets (sold separately) allow you to attach the regulator to a wall or equipment.
Joiner clamps (sold separately) connect the regulator to another Wilkerson modular component with the same series number. They come with mounting brackets to attach the regulator to a wall or equipment.
End block sets (sold separately) allow you to swap out filter/regulator/lubricator components without unthreading your air line connections. The blocks remain connected to your pipe while you replace components between them.
Fit a nonrelieving diaphragm assembly (sold separately) to the regulator to stop it from exhausting excess downstream pressure. This is helpful if you are using a gas you do not want released into the air automatically, such as an expensive noble gas.
Regulators with BSPP threads have mbar gauges.
For technical drawings and 3-D models, click on a part number.
Regulators | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Overall | Joiner Clamps | End Block Sets | |||||||||||||
Manufacturer Series | Inlet | Outlet | Max. Flow Rate | Max. Pressure, psi | Gauge Included | Wd. | Ht. | Max. Temp., °F | Regulating Accuracy | Pressure Regulating Range, psi | Each | Each | Each | |||
Aluminum Housing | ||||||||||||||||
R08 | 1/4 | 1/4 | 52 scfm @ 100 psi | 150 | Yes | 1 5/8" | 4 1/8" | 125° | ±3% | 2-125 | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 000000 |
Regulators | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Overall | Joiner Clamps | Replacement Pressure Gauges | |||||||||||||
Manufacturer Series | Inlet | Outlet | Max. Flow Rate | Max. Pressure, psi | Gauge Included | Wd. | Ht. | Max. Temp., °F | Regulating Accuracy | Pressure Regulating Range, psi | Each | Each | Each | |||
Aluminum Housing | ||||||||||||||||
R08 | 1/4 | 1/4 | 61 scfm @ 100 psi | 300 | Yes | 1 9/16" | 4 1/8" | 150° | ±3% | 1-60 | 0000000 | 000000 | 00000000 | 00000 | 0000000 | 000000 |
R08 | 1/4 | 1/4 | 61 scfm @ 100 psi | 300 | Yes | 1 9/16" | 4 1/8" | 150° | ±3% | 2-125 | 0000000 | 00000 | 00000000 | 0000 | 0000000 | 00000 |
Regulators | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Overall | Joiner Clamps | End Block Sets | |||||||||||||
Manufacturer Series | Inlet | Outlet | Max. Flow Rate | Max. Pressure, psi | Gauge Included | Wd. | Ht. | Max. Temp., °F | Regulating Accuracy | Pressure Regulating Range, psi | Each | Each | Each | |||
Zinc Housing | ||||||||||||||||
R16 | 1/4 | 1/4 | 64 scfm @ 100 psi | 300 | Yes | 2 9/16" | 5 1/4" | 150° | ±3% | 2-125 | 0000000 | 000000 | 00000000 | 000000 | 0000000 | 000000 |
R16 | 1/4 | 1/4 | 64 scfm @ 100 psi | 300 | Yes | 2 9/16" | 5 1/4" | 150° | ±3% | 5-250 | 0000000 | 00000 | 00000000 | 00000 | 0000000 | 00000 |
R16 | 3/8 | 3/8 | 72 scfm @ 100 psi | 300 | Yes | 2 9/16" | 5 1/4" | 150° | ±3% | 2-125 | 0000000 | 00000 | 00000000 | 00000 | 0000000 | 00000 |
R16 | 3/8 | 3/8 | 72 scfm @ 100 psi | 300 | Yes | 2 9/16" | 5 1/4" | 150° | ±3% | 5-250 | 0000000 | 00000 | 00000000 | 00000 | 0000000 | 00000 |
R16 | 1/2 | 1/2 | 79 scfm @ 100 psi | 300 | Yes | 2 9/16" | 5 1/4" | 150° | ±3% | 2-125 | 0000000 | 00000 | 00000000 | 00000 | 0000000 | 00000 |
R16 | 1/2 | 1/2 | 79 scfm @ 100 psi | 300 | Yes | 2 9/16" | 5 1/4" | 150° | ±3% | 5-250 | 0000000 | 00000 | 00000000 | 00000 | 0000000 | 00000 |
Replacement Relieving Diaphragm Assembly | 0000000 | Each | 000000 |
Replacement Pressure Gauge for Regulators with Pressure Regulating Range of 2-125 psi | 0000000 | Each | 00000 |
Optional Mounting Bracket | 0000000 | Each | 00000 |
Replacement Pressure Gauge for Regulators with Pressure Regulating Range of 5-250 psi | 0000000 | Each | 00000 |
Regulators | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Overall | Joiner Clamps | End Block Sets | |||||||||||||
Manufacturer Series | Inlet | Outlet | Max. Flow Rate | Max. Pressure, psi | Gauge Included | Wd. | Ht. | Max. Temp., °F | Regulating Accuracy | Pressure Regulating Range, psi | Each | Each | Each | |||
Aluminum Housing | ||||||||||||||||
R18 | 1/4 | 1/4 | 134 scfm @ 100 psi | 300 | Yes | 2 3/8" | 5 3/8" | 150° | ±3% | 1-60 | 0000000 | 000000 | 00000000 | 000000 | 0000000 | 000000 |
R18 | 1/4 | 1/4 | 98 scfm @ 100 psi | 250 | Yes | 2 3/8" | 5 3/8" | 150° | ±3% | 2-125 | 0000000 | 00000 | 00000000 | 00000 | 0000000 | 00000 |
R18 | 1/4 | 1/4 | 134 scfm @ 100 psi | 300 | Yes | 2 3/8" | 5 3/8" | 150° | ±3% | 5-250 | 0000000 | 00000 | 00000000 | 00000 | 0000000 | 00000 |
R18 | 3/8 | 3/8 | 150 scfm @ 100 psi | 300 | Yes | 2 3/8" | 5 3/8" | 150° | ±3% | 1-60 | 0000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
R18 | 3/8 | 3/8 | 117 scfm @ 100 psi | 250 | Yes | 2 3/8" | 5 3/8" | 150° | ±3% | 2-125 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
R18 | 3/8 | 3/8 | 150 scfm @ 100 psi | 300 | Yes | 2 3/8" | 5 3/8" | 150° | ±3% | 5-250 | 0000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
R18 | 1/2 | 1/2 | 150 scfm @ 100 psi | 300 | Yes | 2 3/8" | 5 3/8" | 150° | ±3% | 1-60 | 0000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
R18 | 1/2 | 1/2 | 117 scfm @ 100 psi | 250 | Yes | 2 3/8" | 5 3/8" | 150° | ±3% | 2-125 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
R18 | 1/2 | 1/2 | 150 scfm @ 100 psi | 300 | Yes | 2 3/8" | 5 3/8" | 150° | ±3% | 5-250 | 0000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
Optional Nonrelieving Diaphragm Assembly | 000000000 | Each | 000000 |
Replacement Relieving Diaphragm Assembly | 000000000 | Each | 00000 |
Optional Mounting Bracket | 0000000 | Each | 00000 |
Replacement Pressure Gauge for Regulators with Pressure Regulating Range of 1-60 psi | 0000000 | Each | 00000 |
Replacement Pressure Gauge for Regulators with Pressure Regulating Range of 5-250 psi | 0000000 | Each | 00000 |
Replacement Pressure Gauge for Regulators with Pressure Regulating Range of 2-125 psi | 0000000 | Each | 00000 |
Regulators | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Overall | Joiner Clamps | End Block Sets | |||||||||||||
Manufacturer Series | Inlet | Outlet | Max. Flow Rate | Max. Pressure, psi | Gauge Included | Wd. | Ht. | Max. Temp., °F | Regulating Accuracy | Pressure Regulating Range, psi | Each | Each | Each | |||
Aluminum Housing | ||||||||||||||||
R28 | 3/8 | 3/8 | 207 scfm @ 100 psi | 300 | Yes | 2 7/8" | 5 7/8" | 150° | ±3% | 1-60 | 0000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 |
R28 | 3/8 | 3/8 | 194 scfm @ 100 psi | 250 | Yes | 3" | 5 7/8" | 150° | ±3% | 2-125 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
R28 | 3/8 | 3/8 | 207 scfm @ 100 psi | 300 | Yes | 2 7/8" | 5 7/8" | 150° | ±3% | 5-250 | 0000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
R28 | 1/2 | 1/2 | 212 scfm @ 100 psi | 300 | Yes | 2 7/8" | 5 7/8" | 150° | ±3% | 1-60 | 0000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
R28 | 1/2 | 1/2 | 204 scfm @ 100 psi | 250 | Yes | 3" | 5 7/8" | 150° | ±3% | 2-125 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
R28 | 1/2 | 1/2 | 212 scfm @ 100 psi | 300 | Yes | 2 7/8" | 5 7/8" | 150° | ±3% | 5-250 | 0000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
R28 | 3/4 | 3/4 | 212 scfm @ 100 psi | 300 | Yes | 2 7/8" | 5 7/8" | 150° | ±3% | 1-60 | 0000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
R28 | 3/4 | 3/4 | 211 scfm @ 100 psi | 250 | Yes | 3" | 5 7/8" | 150° | ±3% | 2-125 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
R28 | 3/4 | 3/4 | 212 scfm @ 100 psi | 300 | Yes | 2 7/8" | 5 7/8" | 150° | ±3% | 5-250 | 0000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
Optional Mounting Bracket | 0000000 | Each | 000000 |
Replacement Pressure Gauge for Regulators with Pressure Regulating Range of 2-125 psi | 0000000 | Each | 000000 |
Replacement Relieving Diaphragm Assembly | 000000000 | Each | 00000 |
Optional Nonrelieving Diaphragm Assembly | 000000000 | Each | 00000 |
Replacement Pressure Gauge for Regulators with Pressure Regulating Range of 1-60 psi | 0000000 | Each | 00000 |
Replacement Pressure Gauge for Regulators with Pressure Regulating Range of 5-250 psi | 0000000 | Each | 00000 |
Regulators | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Overall | Joiner Clamps | ||||||||||||
Manufacturer Series | Inlet | Outlet | Max. Flow Rate | Max. Pressure, psi | Gauge Included | Wd. | Ht. | Max. Temp., °F | Regulating Accuracy | Pressure Regulating Range, psi | Each | Each | ||
Aluminum Housing | ||||||||||||||
R90 | 3/4 | 3/4 | 500 scfm @ 100 psi | 254 | Yes | 3 9/16" | 7 3/16" | 140° | ±3% | 0-174 | 0000000 | 0000000 | 0000000 | 000000 |
R90 | 1 | 1 | 380 scfm @ 100 psi | 254 | Yes | 3 1/2" | 7 1/8" | 140° | ±3% | 0-174 | 000000000 | 000000 | 0000000 | 00000 |
R90 | 1 | 1 | 500 scfm @ 100 psi | 254 | Yes | 3 9/16" | 7 3/16" | 140° | ±3% | 0-232 | 0000000 | 000000 | 0000000 | 00000 |
Wilkerson Modular Compressed Air Regulator Manifolds
Connect two or more of these manifold regulators to meet multiple pressure requirements from a single air supply—set a different output pressure with each regulator. Each regulator has two regulated outlets, one unregulated outlet, and an additional port that can be used for a pressure gauge (not included). Regulators are relieving style, so they exhaust when the downstream pressure exceeds the set pressure. Install in your air line after filters.
Joiner clamps (sold separately) connect manifold regulators to each other and other Wilkerson modular components with the same series number. They come with mounting brackets to attach the regulator to a wall or equipment.
End block sets (sold separately) allow you to swap out filter/regulator/lubricator components without unthreading your air line connections. The blocks remain connected to your pipe while you replace components between them.
For technical drawings and 3-D models, click on a part number.
Regulator Manifolds | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Joiner Clamps | End Block Sets | ||||||||||||
Manufacturer Series | Inlet Pipe Size | Outlet Pipe Size (No. of Outlets) | Max. Flow Rate | Max. Pressure, psi | Wd. | Ht. | Max. Temp., °F | Choose a Pressure Regulating Range, psi | Each | Each | Each | |||
Aluminum Housing | ||||||||||||||
Series No. 09—NPT Female Inlet and Outlets | ||||||||||||||
R09 | 1/4 | 1/4 (1 Unregulated), 1/8 (2 Regulated) | 29 scfm @ 100 psi | 300 | 1 5/8" | 4" | 150° | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 000000 | |
Series No. 19—NPT Female Inlet and Outlets | ||||||||||||||
R19 | 1/4 | 1/4 (1 Unregulated), 1/4 (2 Regulated) | 62 scfm @ 100 psi | 300 | 2 3/8" | 5 1/2" | 150° | 0000000 | 00000 | 00000000 | 00000 | 0000000 | 00000 | |
R19 | 3/8 | 3/8 (1 Unregulated), 1/4 (2 Regulated) | 62 scfm @ 100 psi | 300 | 2 3/8" | 5 1/2" | 150° | 0000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 | |
R19 | 1/2 | 1/2 (1 Unregulated), 1/4 (2 Regulated) | 62 scfm @ 100 psi | 300 | 2 3/8" | 5 1/2" | 150° | 0000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
Wilkerson Modular Compressed Air Filter/Regulators for Particle Removal
and Nylon
Guard
A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone. They provide clean compressed air at your required pressure. Filter has a clear bowl or sight glass so you can see inside to monitor contents. Regulator is relieving style, so it exhausts when the downstream pressure exceeds the set pressure.
Mounting brackets (sold separately) allow you to attach the filter/regulator to a wall or equipment.
Joiner clamps (sold separately) connect the filter/regulator to another Wilkerson modular component with the same series number. They come with mounting brackets.
End block sets (sold separately) allow you to swap out filter/regulator/lubricator components without unthreading your air line connections. The blocks remain connected to your pipe while you replace components between them.
Fit a nonrelieving diaphragm assembly (sold separately) to the filter/regulator to stop it from exhausting excess downstream pressure. This is helpful if you are using a gas you do not want released into the air automatically, such as an expensive noble gas.
For technical drawings and 3-D models, click on a part number.
Pipe Size | Overall | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Manufacturer Series | Inlet | Outlet | Max. Flow Rate | Pressure Regulating Range, psi | Max. Pressure, psi | Max. Temp., °F | Removes Particle Size Down To, microns | Ht. | Wd. | Each | |
Polycarbonate Plastic Bowl—Clear and Manual Drain | |||||||||||
B03 | 1/8 | 1/8 | 16 scfm @ 100 psi | 0-125 | 150 | 125° | 5 | 6 1/4" | 1 5/8" | 000000000 | 000000 |
B03 | 1/4 | 1/4 | 18 scfm @ 100 psi | 0-125 | 150 | 125° | 5 | 6 1/4" | 1 5/8" | 000000000 | 00000 |
Filter/Regulators | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Overall | Joiner Clamps | End Block Sets | ||||||||||||
Manufacturer Series | Inlet | Outlet | Max. Flow Rate | Pressure Regulating Range, psi | Max. Pressure, psi | Max. Temp., °F | Removes Particle Size Down To, microns | Ht. | Wd. | Each | Each | Each | |||
Polycarbonate Plastic Bowl—Clear with Nylon Plastic Guard and Manual Drain | |||||||||||||||
B08 | 1/4 | 1/4 | 73 scfm @ 100 psi | 0-125 | 150 | 125° | 5 | 6 9/16" | 1 5/8" | 000000000 | 000000 | 00000000 | 00000 | 00000000 | 000000 |
Filter/Regulators | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Overall | Joiner Clamps | End Block Sets | ||||||||||||
Manufacturer Series | Inlet | Outlet | Max. Flow Rate | Pressure Regulating Range, psi | Max. Pressure, psi | Max. Temp., °F | Removes Particle Size Down To, microns | Ht. | Wd. | Each | Each | Each | |||
Aluminum Bowl—Opaque with Sight Glass and Automatic Drain | |||||||||||||||
B18 | 1/4 | 1/4 | 88 scfm @ 100 psi | 0-125 | 250 | 150° | 5 | 10 1/8" | 2 3/8" | 0000000 | 0000000 | 00000000 | 000000 | 0000000 | 000000 |
B18 | 3/8 | 3/8 | 117 scfm @ 100 psi | 0-125 | 250 | 150° | 5 | 10 1/8" | 2 3/8" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
B18 | 1/2 | 1/2 | 121 scfm @ 100 psi | 0-125 | 250 | 150° | 5 | 10 1/8" | 2 3/8" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
Optional Nonrelieving Diaphragm Assembly | 000000000 | Each | 000000 |
Replacement Relieving Diaphragm Assembly | 000000000 | Each | 00000 |
Replacement Filter Bowl | 0000000 | Each | 00000 |
Replacement Drains | 000000000 | Each | 00000 |
Optional Mounting Bracket | 0000000 | Each | 00000 |
Replacement Sight Glass | 00000000 | Each | 00000 |
Replacement Filter Element | 00000000 | Each | 00000 |
Filter/Regulators | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Overall | Joiner Clamps | End Block Sets | ||||||||||||
Manufacturer Series | Inlet | Outlet | Max. Flow Rate | Pressure Regulating Range, psi | Max. Pressure, psi | Max. Temp., °F | Removes Particle Size Down To, microns | Ht. | Wd. | Each | Each | Each | |||
Aluminum Bowl—Opaque with Sight Glass and Automatic Drain | |||||||||||||||
B28 | 3/8 | 3/8 | 140 scfm @ 100 psi | 0-125 | 250 | 150° | 5 | 11 1/4" | 3" | 00000000 | 0000000 | 00000000 | 000000 | 00000000 | 000000 |
B28 | 1/2 | 1/2 | 165 scfm @ 100 psi | 0-125 | 250 | 150° | 5 | 11 1/4" | 3" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
B28 | 3/4 | 3/4 | 175 scfm @ 100 psi | 0-125 | 250 | 150° | 5 | 11 1/4" | 3" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
Pipe Size | Overall | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Manufacturer Series | Inlet | Outlet | Max. Flow Rate | Pressure Regulating Range, psi | Max. Pressure, psi | Max. Temp., °F | Removes Particle Size Down To, microns | Ht. | Wd. | Each | |
Aluminum Bowl—Opaque with Sight Glass and Manual Drain | |||||||||||
B39 | 3/4 | 3/4 | 250 scfm @ 100 psi | 0-125 | 250 | 175° | 5 | 16" | 3 5/8" | 000000000 | 0000000 |
B39 | 1 | 1 | 250 scfm @ 100 psi | 0-125 | 250 | 175° | 5 | 16" | 5 7/8" | 000000000 | 000000 |
Replacement Filter Bowl | 0000000 | Each | 0000000 |
Optional Relieving Diaphragm Assembly | 000000000 | Each | 000000 |
Optional Mounting Brackets | 000000000 | Pair | 00000 |
Replacement Filter Element for 3/4" Pipe Size Filter/Regulators | 000000000 | Each | 00000 |
Replacement Sight Glass | 000000000 | Each | 00000 |
Optional Nonrelieving Diaphragm Assembly | 000000000 | Each | 000000 |
Pipe Size | Overall | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Manufacturer Series | Inlet | Outlet | Max. Flow Rate | Pressure Regulating Range, psi | Max. Pressure, psi | Max. Temp., °F | Removes Particle Size Down To, microns | Ht. | Wd. | Each | |
Aluminum Bowl—Opaque with Sight Glass and Automatic Drain | |||||||||||
B90 | 3/4 | 3/4 | 335 scfm @ 100 psi | 0-174 | 254 | 140° | 5 | 13 1/2" | 3 1/2" | 000000000 | 0000000 |
B90 | 1 | 1 | 465 scfm @ 100 psi | 0-174 | 254 | 140° | 5 | 13 1/2" | 3 1/2" | 000000000 | 000000 |
Wilkerson Modular Compressed Air Filter/Regulator/Lubricators (FRLs)
A Wilkerson filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure. Regulator is relieving style, so it exhausts when the downstream pressure exceeds the set pressure. Filter and lubricator have a clear bowl or sight glass so you can monitor the contents inside. Use the included mounting brackets to attach the filter/regulator/lubricator to a wall or equipment.
Stacked filter/regulator/lubricators require less horizontal space than inline FRLs. The filter and regulator are joined top-to-bottom with the lubricator on the side.
Joiner clamps (sold separately) connect the filter/regulator/lubricator to another Wilkerson modular component with the same series number. They come with mounting brackets.
End block sets (sold separately) allow you to swap out filter/regulator/lubricator components without unthreading your air line connections. The blocks remain connected to your pipe while you replace components between them.
Filter/Regulator/Lubricators | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Overall | Joiner Clamps | End Block Sets | |||||||||||
Manufacturer Series | Inlet | Outlet | Max. Flow Rate | Max. Pressure, psi | Removes Particle Size Down To, microns | Pressure Regulating Range, psi | Ht. | Wd. | Each | Each | Each | |||
Inline with Clear Polycarbonate Plastic Bowl | ||||||||||||||
C08 | 1/4 | 1/4 | 44 scfm @ 100 psi | 150 | 5 | 0-125 | 6 1/4" | 4 3/4" | 00000000 | 0000000 | 00000000 | 00000 | 00000000 | 000000 |
Stacked with Clear Polycarbonate Plastic Bowl | ||||||||||||||
D08 | 1/4 | 1/4 | 44 scfm @ 100 psi | 150 | 5 | 0-125 | 7" | 3 1/4" | 00000000 | 000000 | 00000000 | 0000 | 00000000 | 00000 |
Filter/Regulator/Lubricators | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Overall | Joiner Clamps | End Block Sets | |||||||||||
Manufacturer Series | Inlet | Outlet | Max. Flow Rate | Max. Pressure, psi | Removes Particle Size Down To, microns | Pressure Regulating Range, psi | Ht. | Wd. | Each | Each | Each | |||
Inline with Clear Polycarbonate Plastic Bowl | ||||||||||||||
C08 | 1/4 | 1/4 | 25 scfm @ 100 psi | 150 | 5 | 0-125 | 6 3/8" | 4 3/4" | 000000000 | 0000000 | 00000000 | 00000 | 00000000 | 000000 |
Stacked with Clear Polycarbonate Plastic Bowl | ||||||||||||||
D08 | 1/4 | 1/4 | 25 scfm @ 100 psi | 150 | 5 | 0-125 | 7" | 3 1/8" | 000000000 | 000000 | 00000000 | 0000 | 00000000 | 00000 |
Filter/Regulator/Lubricators | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Overall | Joiner Clamps | End Block Sets | |||||||||||
Manufacturer Series | Inlet | Outlet | Max. Flow Rate | Max. Pressure, psi | Removes Particle Size Down To, microns | Pressure Regulating Range, psi | Ht. | Wd. | Each | Each | Each | |||
Inline with Opaque Aluminum Bowl and Sight Glass | ||||||||||||||
C18 | 1/4 | 1/4 | 85 scfm @ 100 psi | 250 | 5 | 0-125 | 9" | 7 7/8" | 00000000 | 0000000 | 00000000 | 000000 | 0000000 | 000000 |
C18 | 3/8 | 3/8 | 100 scfm @ 100 psi | 250 | 5 | 0-125 | 9" | 7 7/8" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
C18 | 1/2 | 1/2 | 100 scfm @ 100 psi | 250 | 5 | 0-125 | 9" | 7 7/8" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
Stacked with Opaque Aluminum Bowl and Sight Glass | ||||||||||||||
D18 | 1/4 | 1/4 | 80 scfm @ 100 psi | 250 | 5 | 0-125 | 10 1/4" | 5 1/8" | 00000000 | 000000 | 00000000 | 00000 | 0000000 | 00000 |
D18 | 3/8 | 3/8 | 90 scfm @ 100 psi | 250 | 5 | 0-125 | 10 1/2" | 5 1/8" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
D18 | 1/2 | 1/2 | 110 scfm @ 100 psi | 250 | 5 | 0-125 | 10 1/4" | 5 1/8" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
Filter/Regulator/Lubricators | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Overall | Joiner Clamps | End Block Sets | |||||||||||
Manufacturer Series | Inlet | Outlet | Max. Flow Rate | Max. Pressure, psi | Removes Particle Size Down To, microns | Pressure Regulating Range, psi | Ht. | Wd. | Each | Each | Each | |||
Inline with Opaque Aluminum Bowl and Sight Glass | ||||||||||||||
C18 | 1/4 | 1/4 | 100 scfm @ 100 psi | 150 | 5 | 0-125 | 8 3/8" | 7 3/4" | 000000000 | 0000000 | 00000000 | 000000 | 0000000 | 000000 |
C18 | 3/8 | 3/8 | 100 scfm @ 100 psi | 150 | 5 | 0-125 | 8 3/8" | 7 3/4" | 000000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
C18 | 1/2 | 1/2 | 100 scfm @ 100 psi | 150 | 5 | 0-125 | 8 3/8" | 7 3/4" | 000000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
Stacked with Opaque Aluminum Bowl and Sight Glass | ||||||||||||||
D18 | 1/4 | 1/4 | 65 scfm @ 100 psi | 150 | 5 | 0-125 | 10" | 5" | 000000000 | 000000 | 00000000 | 00000 | 0000000 | 00000 |
Filter/Regulator/Lubricators | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Overall | Joiner Clamps | End Block Sets | |||||||||||
Manufacturer Series | Inlet | Outlet | Max. Flow Rate | Max. Pressure, psi | Removes Particle Size Down To, microns | Pressure Regulating Range, psi | Ht. | Wd. | Each | Each | Each | |||
Inline with Opaque Aluminum Bowl and Sight Glass | ||||||||||||||
C28 | 3/8 | 3/8 | 95 scfm @ 100 psi | 250 | 5 | 0-125 | 11 1/4" | 9 3/8" | 00000000 | 0000000 | 00000000 | 000000 | 00000000 | 000000 |
C28 | 1/2 | 1/2 | 110 scfm @ 100 psi | 250 | 5 | 0-125 | 11 1/4" | 9 3/8" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
C28 | 3/4 | 3/4 | 110 scfm @ 100 psi | 250 | 5 | 0-125 | 11 1/4" | 9 3/8" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
Stacked with Opaque Aluminum Bowl and Sight Glass | ||||||||||||||
D28 | 3/8 | 3/8 | 110 scfm @ 100 psi | 250 | 5 | 0-125 | 11 1/4" | 6 1/8" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
D28 | 1/2 | 1/2 | 125 scfm @ 100 psi | 250 | 5 | 0-125 | 11 1/4" | 6 1/8" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
D28 | 3/4 | 3/4 | 140 scfm @ 100 psi | 250 | 5 | 0-125 | 11 1/4" | 6 1/8" | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
Filter/Regulator/Lubricators | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Overall | Joiner Clamps | End Block Sets | |||||||||||
Manufacturer Series | Inlet | Outlet | Max. Flow Rate | Max. Pressure, psi | Removes Particle Size Down To, microns | Pressure Regulating Range, psi | Ht. | Wd. | Each | Each | Each | |||
Inline with Opaque Aluminum Bowl and Sight Glass | ||||||||||||||
C28 | 3/8 | 3/8 | 120 scfm @ 100 psi | 150 | 5 | 0-125 | 11 1/2" | 9 3/8" | 000000000 | 0000000 | 00000000 | 000000 | 00000000 | 000000 |
C28 | 1/2 | 1/2 | 130 scfm @ 100 psi | 150 | 5 | 0-125 | 11 1/2" | 9 3/8" | 000000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
C28 | 3/4 | 3/4 | 140 scfm @ 100 psi | 150 | 5 | 0-125 | 11 1/2" | 9 3/8" | 000000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
Stacked with Opaque Aluminum Bowl and Sight Glass | ||||||||||||||
D28 | 1/2 | 1/2 | 110 scfm @ 100 psi | 150 | 5 | 0-125 | 11 1/2" | 6 1/8" | 000000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
D28 | 3/4 | 3/4 | 130 scfm @ 100 psi | 150 | 5 | 0-125 | 11 1/2" | 6 1/8" | 000000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
Pipe Size | Overall | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Manufacturer Series | Inlet | Outlet | Max. Flow Rate | Max. Pressure, psi | Removes Particle Size Down To, microns | Pressure Regulating Range, psi | Ht. | Wd. | Each | |
Inline with Opaque Aluminum Bowl and Sight Glass | ||||||||||
C90 | 1 | 1 | 170 scfm @ 100 psi | 254 | 5 | 0-174 | 13 5/8" | 10 5/8" | 000000000 | 0000000 |
Stacked with Opaque Aluminum Bowl and Sight Glass | ||||||||||
D90 | 1 | 1 | 340 scfm @ 100 psi | 254 | 5 | 0-174 | 13 5/8" | 7" | 000000000 | 000000 |
Safety Lockout Valves for Wilkerson Modular
Compressed Air Filter/Regulator/Lubricators (FRLs)
Prevent accidental start-up when servicing equipment. These lockout valves exhaust downstream pressure and can be locked in the shut-off position using a padlock (not included). Valves help your process comply with OSHA regulations for lockout/tagout procedures.
Joiner clamps (sold separately) connect the safety lockout valve to another Wilkerson modular component with the same series number. They come with mounting brackets to attach the valve to a wall or equipment.
End block sets (sold separately) allow you to swap out filter/regulator/lubricator components without unthreading your air line connections. The blocks remain connected to your pipe while you replace components between them.
For technical drawings and 3-D models, click on a part number.
Valves | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Overall | Joiner Clamps | End Block Sets | ||||||||||
Inlet | Outlet | Max. Flow Rate | Max. Pressure, psi | Max. Temp., °F | Locking Mechanism Color | Ht. | Wd. | Each | Each | Each | |||
NPT Female Inlet and Outlet | |||||||||||||
V40 Series | |||||||||||||
1/4 | 1/4 | 42 scfm @ 100 psi | 246 | 175° | Orange | 2 7/8" | 2" | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 000000 |
V60 Series | |||||||||||||
3/8 | 3/8 | 190 scfm @ 100 psi | 246 | 175° | Orange | 3 1/2" | 2 7/8" | 0000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
1/2 | 1/2 | 258 scfm @ 100 psi | 246 | 175° | Orange | 3 1/2" | 2 7/8" | 0000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
V73 Series | |||||||||||||
1/2 | 1/2 | 561 scfm @ 100 psi | 246 | 175° | Orange | 3 7/8" | 3 1/4" | 0000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
3/4 | 3/4 | 678 scfm @ 100 psi | 246 | 175° | Orange | 3 7/8" | 3 1/4" | 0000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
Slow-Start Air-Exhaust Valves for Wilkerson Modular
Compressed Air Filter/Regulator/Lubricators (FRLs)
Also known as Monday-morning valves, these valves slowly introduce pressure to reduce surge damage during start-up. When the solenoid is shut off, the valve cuts air to your equipment by exhausting downstream pressure. To ensure compatibility, the valve series number should match the series number on your Wilkerson components.
For technical drawings and 3-D models, click on a part number.
Pipe Size | Valve | Overall | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Manufacturer Series | Inlet | Outlet | Exhaust | Type | Starting Position | Max. Flow Rate | Max. Pressure, psi | Temperature Range, °F | Ht. | Wd. | Dp. | Each | |
120V AC | |||||||||||||
NPT Female Inlet, Outlet, and Exhaust | |||||||||||||
Series No. 18 | |||||||||||||
E18 | 1/4 | 1/4 | 3/8 | Poppet | Normally Closed | 80 scfm @ 100 psi | 150 | 32° to 150° | 7 3/8" | 2 3/4" | 2 3/8" | 0000000 | 0000000 |
E18 | 3/8 | 3/8 | 3/8 | Poppet | Normally Closed | 90 scfm @ 100 psi | 150 | 32° to 150° | 7 3/8" | 2 3/4" | 2 3/8" | 0000000 | 000000 |
E18 | 1/2 | 1/2 | 3/8 | Poppet | Normally Closed | 95 scfm @ 100 psi | 150 | 32° to 150° | 7 3/8" | 2 3/4" | 2 3/8" | 0000000 | 000000 |
Series No. 28 | |||||||||||||
E28 | 3/4 | 3/4 | 3/8 | Spool | Normally Closed | 230 scfm @ 100 psi | 150 | 32° to 150° | 7 3/8" | 3" | 2 7/8" | 0000000 | 000000 |
24V DC | |||||||||||||
NPT Female Inlet, Outlet, and Exhaust | |||||||||||||
Series No. 18 | |||||||||||||
E18 | 1/4 | 1/4 | 3/8 | Poppet | Normally Closed | 80 scfm @ 100 psi | 150 | 32° to 150° | 7 3/8" | 2 3/4" | 2 3/8" | 0000000 | 000000 |
E18 | 3/8 | 3/8 | 3/8 | Poppet | Normally Closed | 90 scfm @ 100 psi | 150 | 32° to 150° | 7 3/8" | 2 3/4" | 2 3/8" | 0000000 | 000000 |
E18 | 1/2 | 1/2 | 3/8 | Poppet | Normally Closed | 95 scfm @ 100 psi | 150 | 32° to 150° | 7 3/8" | 2 3/4" | 2 3/8" | 0000000 | 000000 |
Series No. 28 | |||||||||||||
E28 | 3/8 | 3/8 | 3/8 | Spool | Normally Closed | 196 scfm @ 100 psi | 150 | 32° to 150° | 7 3/8" | 3" | 2 7/8" | 0000000 | 000000 |
E28 | 1/2 | 1/2 | 3/8 | Spool | Normally Closed | 210 scfm @ 100 psi | 150 | 32° to 150° | 7 3/8" | 3" | 2 7/8" | 0000000 | 000000 |
E28 | 3/4 | 3/4 | 3/8 | Spool | Normally Closed | 230 scfm @ 100 psi | 150 | 32° to 150° | 7 3/8" | 3" | 2 7/8" | 0000000 | 000000 |