Multiple colors allow you to color-code your line for easy identification.

Designed for use in welding applications, this tubing has multiple layers of material and is specially formulated to self-extinguish.

Safely power seat controls, horns, and other vehicle parts with compressed air.

Keep your work area tidy with this coiled tubing that extends when you need it and retracts out of the way when you don’t.

A lightweight alternative to stainless steel, this tubing can handle extreme-pressure applications up to 1,000 psi.

This tubing offers superior impact and crack resistance—even at low temperatures.

Designed for use in welding applications, these fittings are flame retardant.

Hose blends the flexibility of PVC with the durability and abrasion resistance of rubber.

Draw water out of pits, loading docks, and other areas prone to flooding through lines connected by cam-and-groove fittings.

Attach barbed fittings to this hose for use in low-pressure air applications.

Made of FEP (fluorinated ethylene propylene), this hose can stand up to chemicals at high temperatures.

Expose this UHMW (ultra-high molecular weight) polyethylene hose to harsh physical conditions without worrying about it deteriorating or becoming brittle.

Step on this hose and it springs back to its original shape.

Suction, transfer, and dispense wet food and beverages with up to 99% alcohol concentrations.

A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94 V-0 for flame retardance.

An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.

Wrap this sleeving around cable, cords and wires to protect them and to form bundles.

Identify ground wire with this green-and-yellow striped tubing.

Maintain a supply of tubing in a variety of sizes that withstand abrasion, moisture, and chemicals.

Slide the strut channel into the tube for telescoping length adjustments.

Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.

This welded, one-piece strut channel combines two strut channels side-to-side.

Add hardware to strut channel without having to hold the washer in place or reach inside the channel.

Designed to wrap around the sides of strut channel, these brackets provide a stronger hold than other strut channel brackets.

Position two strut channels at a 30° to 90° angle, then tighten the bolt to secure.

Support the corners of strut channel structures.

Create a four-sided raceway for cable, or give a more finished look to strut channel structures.