A polyester braid is embedded into the walls of this tubing, giving it the strength to withstand higher pressures than other soft tubing for air and water. Use in applications up to 350 psi.

This tubing won’t degrade when exposed to the damaging effects of UV light.

Thick walls give this tubing excellent abrasion resistance.

This self-extinguishing tubing meets UL 94 V-0 and UL 94 V-1 for flame retardance, so it delays the spread of flames to valuable equipment.

With excellent resistance to abrasion and tearing, this tubing can hold up in rugged environments.

This multiple-line tubing holds together on its own, so there's no need for cable ties or tape.

An inner liner releases silver ions to inhibit the growth of bacteria, mold, fungi, and other odor-causing microbes.

Designed for use in welding applications, this tubing has multiple layers of material and is specially formulated to self-extinguish.

Excellent strength and durability allow this tubing to handle high-pressure air and water applications up to 950 psi.

This self-extinguishing tubing meets UL 94 V-0 or UL 94 V-2 for flame retardance to delay the spread of flames to valuable equipment.

Made of moisture-resistant plastic, this tubing won't soften and lose strength, even in high-humidity environments.

Keep your work area tidy with this coiled tubing that extends when you need it and retracts out of the way when you don’t.

Ultraviolet light won’t cause this tubing to degrade or deteriorate.

A lightweight alternative to stainless steel, this tubing can handle extreme-pressure applications up to 1,000 psi.

Use this resilient tubing in high-temperature chemical applications up to 400° F.

With excellent resistance to abrasion and tearing, this tubing can hold up in rugged environments.

This tubing can withstand high-temperature chemical applications up to 400° F.

Typically used in applications requiring movement, such as metering (peristaltic) pumps and robotics, this tubing can handle repeated bending and flexing.

With a diameter of 2" or larger, this tubing has the girth to handle high-volume beverage and bulk food processing applications.

Lighter than other plastic and rubber tubing, but extremely tough, this tubing stands up to the wear and tear of daily use.

Move high volumes of dry bulk food, powders, and pellets around your food processing plant while reducing the risk of contaminating the food.

This tubing offers superior impact and crack resistance—even at low temperatures.

Strong, hard walls give this tubing extra support in high-pressure and vacuum applications.

This tubing can handle the highest temperatures of all of our fuel and lubricant tubing. Use it in applications up to 450° F.

A built-in shut-off valve stops airflow when the fittings are disconnected from tubing.

Make lightweight connections without the hassle of matching the exact thread type—these fittings connect to NPT, NPTF, BSPP, BSPT, and other universal threads.

These fittings won’t absorb moisture, so they’re good for water and high-humidity air applications.

Use at pressures up to 250 psi.

Designed for use in welding applications, these fittings are flame retardant.

Made of EPDM, the gasket on these fittings stands up to the hot water found in heat exchangers and cooling systems. These fittings have stainless steel pipe threads, which are more durable than the plastic pipe threads found on other push-to-connect tube fittings.

Minimize leaks in your line—these fittings have a single barb that creates a smooth clamping surface for extra-tight connections.

Lighter in weight than their metal counterparts, these compression fittings are polypropylene.

A built-in shut-off valve stops the flow when the coupling is separated, so there’s no need to worry about air or water spilling from your line. Couplings are plastic, which is lighter in weight than metal couplings.

Slide tubing into these fittings and secure with a clamp. Use at low pressures up to 80 psi.

Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. Use in applications up to 150 psi.

Fittings have a sleeve that bites into tubing as you tighten the nut to form a seal in applications up to 120 psi. Also known as flareless fittings.

Quick-disconnect couplings consist of a plug and a socket that join with a latch so you can easily connect and disconnect your line. Use in applications up to 120 psi.

Fittings can withstand temperatures up to 200° F.

Connect stainless steel tubing on one end and plastic tubing on the other end.

Connect to thick-wall plastic pipe fittings for use in heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. Pipe can handle pressures up to 900 psi.

No clamps or banding are needed to secure fittings to this hose; the more you pull on the fittings, the tighter the hose will grip.

Made of a PVC and Buna-N blend, this hose is lighter in weight than standard EPDM water hose.

Made of high-purity PVC with 303 stainless steel fittings, this hose won’t contaminate water. It’s often used to transfer deionized water in applications such as semiconductor manufacturing.

Made of high-purity PVC with 316 stainless steel fittings, this hose won’t contaminate water. It’s often used to transfer deionized water in applications such as semiconductor manufacturing.

Certified to meet NSF/ANSI 61, this hose is safe for use in drinking water systems.

Wash down equipment in food-processing plants, dairies, and other facilities with hot water.

With fittings already attached, it’s easy to connect this hose to a washdown station and wash gun.

Power away dirt with this heavy duty rubber hose that's also known as pressure-washer hose.

The cover on this hose meets MSHA (Mine Safety and Health Administration) standards for flame resistance.

When your process requires hot water, reach for this rubber hose.

Hose blends the flexibility of PVC with the durability and abrasion resistance of rubber.

Let go of this hose and it retracts back to its original coiled form.

Lighter than rubber and more flexible than PVC, this polyurethane hose stands up to the wear and tear of daily use.

Keep your water running in temperatures down to -20° F.

Draw water out of pits, loading docks, and other areas prone to flooding through lines connected by cam-and-groove fittings.

With flanged ends that join with quick-clamp fittings, it’s easy to disconnect this hose for cleaning. It meets NSF/ANSI 61, a strict standard for drinking water systems, and is 3-A certified for its sanitary design.

Hose is PVC, so it’s lighter and less cumbersome than rubber hose.

Transfer compressed air that’s up to 500 psi—this hose has extra-strong yarn reinforcement for excellent durability.

Lighter than rubber and more flexible than PVC, this polyurethane hose stands up to the wear and tear of daily use.

Prevent electrostatic discharge (ESD) while moving compressed air in dry environments, such as when powder coating or spray painting.