Garden Hose Wash Guns
For light duty spray-down applications, attach these wash guns to any standard garden hose. They have a locking clip to hold nozzle open for continuous spraying.
Guns with insulated bodies protect your hands from exposure to high water temperatures.
Styles A, B, and C have garden hose male connection at the spray end for attaching accessories.
Style A with plastic body is built entirely from corrosion resistant components. It is typically used in applications near salt water. For cold water use only.
Styles A, B, and C have a squeeze lever that controls the spray pattern. Style D has a five-position dial to adjust between seven spray patterns: shower, jet, cone, mist, stream, full, and flood.
Inlet | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Body Material | Max. Flow Rate, gpm | Max. Pressure, psi | Max. Temp. | Inlet Connection Adjustability | Hose Size | Thread Type | Gender | Features | Includes | Each | |
| A | Plastic | 7 | 60 | Not Rated | Fixed | 3/4 | GHT | Female | __ | Washers | 0000000 | 00000 |
| A | Zinc | 8.8 | 60 | 100° F | Fixed | 3/4 | GHT | Female | __ | Washers | 0000000 | 0000 |
| B | Zinc | 6 | 120 | 160° F | Fixed | 3/4 | GHT | Female | Insulated, Cushioned Body | Protective Thread Cover, Washers | 0000000 | 00000 |
| C | Zinc | 8.8 | 60 | 100° F | Fixed | 3/4 | GHT | Female | Insulated Body | Washers | 0000000 | 0000 |
| D | Zinc | 8.8 | 60 | 100° F | Fixed | 3/4 | GHT | Female | __ | Washers | 0000000 | 00000 |
| D | Zinc | 8.8 | 60 | 100° F | Fixed | 3/4 | GHT | Female | Insulated, Cushioned Body | Washers | 0000000 | 00000 |
Heavy Duty Wash Guns
These durable wash guns are typically used for frequent washdowns and cleanup. Note: These guns should not be connected to steam lines.
Swivel inlet connection provides easier gun handling and prevents hose from kinking.
Bronze body wash guns are the economical choice. Aluminum body wash guns are lightweight and durable. Stainless steel body wash guns are corrosion resistant and more durable than bronze and aluminum.
Guns with insulated body protect you from exposure to high water temperatures and minimized damage to the gun if dropped.
Style A has a trigger lock to prevent accidental discharge.
Style B are half the weight of other models.
Some Style C and Style D wash guns have a locking clip to hold nozzle open for continuous spraying.
Style E have a trigger that adjusts the spray pattern from a solid stream to a broad cone. Change out the spray cap to switch the water flow. Guns have a swivel connection when the included 3/4" garden hose thread (GHT) inlet connector is used. If connector is not used, inlet connection is 1/2 NPT.
Style F have a trigger that adjusts the spray pattern from a solid stream to a broad cone. It can be locked into place.
Maintenance Kits—Have replacements for parts that are prone to wear.
Wash Guns | Maintenance Kits | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Max. Flow Rate, gpm | Max. Pressure, psi | Max. Temp., °F | Inlet Connection Adjustability | Inlet Hose Connection Type | For Inlet Hose ID | Features | Each | Each | ||
Bronze Body | ||||||||||
| 8.1 | 150 | 200° | Swivel | Barbed | 3/4" | Insulated Body | 0000000 | 000000 | 0000000 | 000000 |
Stainless Steel Body | ||||||||||
| 8.1 | 150 | 200° | Swivel | Barbed | 3/4" | Insulated Body | 0000000 | 000000 | 0000000 | 00000 |
Wash Guns | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inlet Pipe Connection | Maintenance Kits | Replacement Swivel Connections | |||||||||||||
| Max. Flow Rate, gpm | Max. Pressure, psi | Max. Temp., °F | Inlet Connection Adjustability | Inlet Hose Connection Type | For Inlet Hose ID | Pipe Size | Thread Type | Gender | Features | Each | Each | Each | |||
Bronze Body | |||||||||||||||
| 12.5 | 150 | 200° | Swivel | Barbed | 3/4" | __ | __ | __ | Insulated Body | 0000000 | 0000000 | 0000000 | 000000 | 000000 | 00 |
| 25 | 200 | 200° | Swivel | __ | __ | 1/2 | NPT | Female | Insulated Body | 0000000 | 000000 | 0000000 | 00000 | 00000000 | 000000 |
Aluminum Body | |||||||||||||||
| 12.5 | 150 | 200° | Swivel | Barbed | 3/4" | __ | __ | __ | Insulated Body | 00000000 | 000000 | 0000000 | 00000 | 000000 | 00 |
Stainless Steel Body | |||||||||||||||
| 7 | 200 | 180° | Fixed | Barbed | 3/4" | __ | __ | __ | Insulated Body, Locking Clip | 0000000 | 000000 | 0000000 | 00000 | 000000 | 00 |
| 12.5 | 150 | 200° | Swivel | Barbed | 3/4" | __ | __ | __ | Insulated Body | 00000000 | 000000 | 00000000 | 00000 | 000000 | 00 |
| 15 | 200 | 180° | Fixed | Barbed | 3/4" | __ | __ | __ | Insulated Body, Locking Clip | 0000000 | 000000 | 0000000 | 00000 | 000000 | 00 |
| 24 | 200 | 200° | Fixed | Barbed | 3/4" | __ | __ | __ | Insulated Body, Locking Clip | 0000000 | 000000 | 0000000 | 00000 | 000000 | 00 |
Wash Guns | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inlet Pipe Connection | Maintenance Kits | Replacement Swivel Connections | |||||||||||||
| Max. Flow Rate, gpm | Max. Pressure, psi | Max. Temp., °F | Inlet Connection Adjustability | Inlet Hose Connection Type | For Inlet Hose ID | Pipe Size | Thread Type | Gender | Features | Each | Each | Each | |||
Bronze Body | |||||||||||||||
| 25 | 200 | 200° | Swivel | __ | __ | 1/2 | NPT | Female | Insulated Body | 0000000 | 0000000 | 0000000 | 000000 | 00000000 | 000000 |
Stainless Steel Body | |||||||||||||||
| 7 | 200 | 180° | Fixed | Barbed | 3/4" | __ | __ | __ | Insulated Body, Locking Clip | 0000000 | 000000 | 0000000 | 00000 | 000000 | 00 |
| 15 | 200 | 180° | Fixed | Barbed | 3/4" | __ | __ | __ | Insulated Body, Locking Clip | 0000000 | 000000 | 0000000 | 00000 | 000000 | 00 |
| 24 | 200 | 200° | Fixed | Barbed | 3/4" | __ | __ | __ | Insulated Body, Locking Clip, Trigger Guard | 0000000 | 000000 | 0000000 | 00000 | 000000 | 00 |
Wash Guns | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Inlet Pipe Connection | Maintenance Kits | ||||||||||
| Max. Flow Rate, gpm | Max. Pressure, psi | Max. Temp., °F | Inlet Connection Adjustability | PIpe Size | Thread Type | Gender | Features | Each | Each | ||
Aluminum Body | |||||||||||
| 10, 16 | 150 | 200° | Swivel | 1/2 | NPT | Female | Adjustable Flow, Insulated Body | 0000000 | 0000000 | 0000000 | 000000 |
| 10, 16, 22 | 150 | 200° | Swivel | 1/2 | NPT | Female | Adjustable Flow, Insulated Body | 00000000 | 000000 | 0000000 | 00000 |
Brass Body | |||||||||||
| 10, 16 | 150 | 200° | Swivel | 1/2 | NPT | Female | Adjustable Flow, Insulated Body | 0000000 | 000000 | 0000000 | 00000 |
| 10, 16, 22 | 150 | 200° | Swivel | 1/2 | NPT | Female | Adjustable Flow, Insulated Body | 00000000 | 000000 | 0000000 | 00000 |
Wash Guns | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inlet Pipe Connection | Maintenance Kits | Replacement Swivel Connections | |||||||||||
| Max. Flow Rate, gpm | Max. Pressure, psi | Max. Temp., °F | Inlet Connection Adjustability | Pipe Size | Thread Type | Gender | Features | Each | Each | Each | |||
Plastic Body | |||||||||||||
| 15.5 | 750 | 180° | Swivel | 3/8 | NPT | Female | Insulated Body, Trigger Guard | 00000000 | 0000000 | 00000000 | 000000 | 000000000 | 000000 |
| 15.5 | 750 | 180° | Swivel | 3/8 | BSPT | Female | Insulated Body, Trigger Guard | 0000000 | 000000 | 000000 | 00 | 000000 | 00 |
| 21 | 300 | 180° | Swivel | 1/2 | NPT | Female | Insulated Body, Trigger Guard | 00000000 | 000000 | 00000000 | 00000 | 000000000 | 00000 |
| 21 | 300 | 180° | Swivel | 1/2 | BSPT | Female | Insulated Body, Trigger Guard | 0000000 | 000000 | 000000 | 00 | 000000 | 00 |
Wash Guns | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inlet Pipe Connection | Nozzle Extension | Maintenance Kits | ||||||||||
| Max. Flow Rate, gpm | Max. Pressure, psi | Max. Temp., °F | Inlet Connection Adjustability | Pipe Size | Thread Type | Gender | Lg. | Material | Each | Each | ||
Plastic Body | ||||||||||||
| 5 | 250 | 200° | Fixed | 1/4 | NPT | Female | 18" | Brass | 0000000 | 0000000 | 000000 | 00 |
| 5 | 250 | 200° | Fixed | 1/4 | NPT | Female | 24" | Brass | 0000000 | 000000 | 000000 | 00 |
Aluminum Body | ||||||||||||
| 5 | 250 | 200° | Fixed | 1/4 | NPS | Male | 18" | Brass | 0000000 | 000000 | 0000000 | 000000 |
| 5 | 250 | 200° | Fixed | 1/4 | NPS | Male | 24" | Brass | 0000000 | 000000 | 0000000 | 00000 |
Wash Guns with Solution Bottle
Connect these guns to your garden hose and automatically dispense solution from the attached bottle instead of dragging around a siphon hose. Use the attachment to adjust the spray pattern from mist to solid stream.
Wash gun has a rinse lever that allows you to instantly change from using the wash solution to rinsing with clean water. Set to mix 2 oz. of cleaner per gallon of water.
Foam gun creates thick foam. Gun mixes up to 12 oz. of foaming chemicals per gallon of water.
Pressure, psi | Bottle | Inlet | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Gun Type | Max. Flow Rate | Min. | Max. | Max. Temp., °F | Mixing Head Material | Cap., oz. | Material | Inlet Connection Adjustability | Hose Size | Thread Type | Gender | Features | Each | |
| Wash | 3 | 40 | 60 | 100° | Brass | 32 | Plastic | Fixed | 3/4 | GHT | Female | Insulated Body | 0000000 | 000000 |
| Foam | 1.5 | 40 | 60 | 100° | Brass | 32 | Plastic | Fixed | 3/4 | GHT | Female | Insulated Body | 0000000 | 00000 |
Diesel-Fuel Hose Nozzles
Control the flow while dispensing diesel fuel. Nozzles are aluminum, which is lightweight with good corrosion resistance.
Nozzles with automatic shut-off will stop dispensing when the tank is full or if the nozzle falls from the tank. They have a built-in check valve that reduces spillage when withdrawing the nozzle from tank. Nozzles have an angled design, which reduces hose kinking for efficient fueling. They come with a plastic scuff guard to protect the nozzle from damage.
Nozzles with manual shut-off have a trigger to stop the flow. Do not leave the nozzle unattended when in use.
Nozzles with three-position hold-open clip allow you to dispense fuel without holding the trigger.
Style A is also known as a service-station-style nozzle. The nozzle tip has a stream straightener (also known as a stream shaper), which reduces turbulence for less spillage. Attach an optional splash guard (sold separately) to protect your hands from spray.
Styles B and C are also known as truck-stop nozzles. They have higher flow rates than Style A to dispense large quantities of fuel quickly. Style C includes a splash guard to protect your hands from spray.
Style D has the largest spout and the highest flow rate of all the nozzles for use with trucks, buses, and other heavy-duty bulk fueling applications.
Use hold-open clip kits to replace a broken clip. Install with pliers.
For technical drawings and 3-D models, click on a part number.
Nozzles | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Spout | Scuff Guard | Threaded Swivels | Replacement Hold-Open Clip Kits | ||||||||||||||
| Style | Max. Flow Rate, gpm | Pipe Size | Connection | Max. Pressure | Temperature Range, °F | OD | Lg. | Material | Color | Shut-Off Type | Specifications Met | Each | Each | Each | |||
Nozzles | |||||||||||||||||
| A | 10 | 3/4 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 15/16" | 6 1/2" | Aluminum | Green | Automatic, Manual | UL Listed | 0000000 | 0000000 | 000000 | 00 | 000000 | 00 |
| A | 10 | 3/4 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 15/16" | 6 1/2" | Aluminum | Red | Automatic, Manual | UL Listed | 0000000 | 000000 | 0000000 | 000000 | 000000 | 00 |
| B | 25 | 1 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 1 1/8" | 6 13/16" | Aluminum | Green | Automatic, Manual | UL Listed | 0000000 | 000000 | 0000000 | 000000 | 000000 | 00 |
Nozzles with Three-Position Hold-Open Clip | |||||||||||||||||
| A | 10 | 3/4 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 15/16" | 6 1/2" | Aluminum | Green | Automatic, Manual | __ | 0000000 | 000000 | 000000 | 00 | 0000000 | 000000 |
| C | 75 | 1 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 1 3/8" | 7" | Aluminum | Green | Automatic, Manual | UL Listed | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 00000 |
| D | 100 | 1 1/4 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 1 1/4" | 7 1/4" | Aluminum | __ | Manual | __ | 0000000 | 000000 | 000000 | 00 | 000000 | 00 |
| D | 100 | 1 1/2 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 1 1/2" | 7 7/8" | Aluminum | __ | Manual | __ | 00000000 | 000000 | 000000 | 00 | 000000 | 00 |
Gasoline Hose Nozzles
These nozzles let you adjust the flow while dispensing gasoline. They are also known as service-station-style nozzles. Nozzles will shut off automatically when the tank is full or if the nozzle falls from the tank. They have a built-in check valve to reduce spillage when withdrawing the nozzle from tank. The nozzle tip has a stream straightener (also known as a stream shaper), which reduces turbulence for less spillage. A plastic scuff guard protects the nozzle from damage. Attach an optional splash guard (sold separately) to protect your hands from spray. Nozzles are aluminum, which is lightweight with good corrosion resistance.
Nozzles with three-position hold-open clip allow you to dispense fuel without holding the trigger.
Use hold-open clip kits to replace a broken clip. Install with pliers.
For technical drawings and 3-D models, click on a part number.
Nozzles | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Spout | Threaded Swivels | Replacement Hold-Open Clip Kits | |||||||||||||
| Max. Flow Rate, gpm | Pipe Size | Connection | Max. Pressure | Temperature Range, °F | OD | Lg. | Material | Shut-Off Type | Specifications Met | Each | Each | Each | |||
Nozzles | |||||||||||||||
| 10 | 3/4 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 13/16" | 6 1/2" | Aluminum | Automatic, Manual | UL Listed | 0000000 | 0000000 | 0000000 | 000000 | 000000 | 00 |
Nozzles with Three-Position Hold-Open Clip | |||||||||||||||
| 10 | 3/4 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 13/16" | 6 1/2" | Aluminum | Automatic, Manual | __ | 0000000 | 000000 | 000000 | 00 | 0000000 | 000000 |
| Optional Red Splash Guard | 0000000 | Each | 000000 |
Chemical Hose Nozzles
Adjust the flow while dispensing liquid chemicals. Nozzles are polypropylene, which is lightweight with excellent chemical resistance. They shut off manually.
Style A has a lever to turn flow on and off. It has a higher flow rate and bigger spout than Style B to dispense large quantities of liquid chemicals into drums and tanks quickly.
Style B has a trigger to turn flow on and off. It has an angled design, which reduces hose kinking for efficient fueling. Nozzle has a barbed connection; twist hose onto the barbed end and secure with a clamp. Use to transfer citric acid, nitric acid, phosphoric acid, and sodium hydroxide from pumps and processing equipment.
Warning: Do not leave nozzles unattended when in use.
For technical drawings and 3-D models, click on a part number.
Spout | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Max. Flow Rate, gpm | Pipe Size | For Hose ID | Connection | Max. Pressure | Temperature Range, °F | OD | Lg. | Material | Shut-Off Type | Each | |
For Use With Citric Acid, Ethyl Alcohol, Phosphoric Acid, and Sodium Hydroxide | ||||||||||||
| A | 180 | 1 1/2 | __ | Threaded NPT Female | 225 psi @ 72° F | -20° to 150° | 1 7/8" | 7" | Polypropylene Plastic | Manual | 00000000 | 000000 |
| A | 200 | 2 | __ | Threaded NPT Female | 200 psi @ 72° F | -20° to 150° | 2 3/8" | 7" | Polypropylene Plastic | Manual | 00000000 | 00000 |
| A | 240 | 2 | __ | Threaded NPT Female | 225 psi @ 72° F | -20° to 150° | 2 3/8" | 7" | Polypropylene Plastic | Manual | 00000000 | 00000 |
For Use With Citric Acid, Nitric Acid, Phosphoric Acid, and Sodium Hydroxide | ||||||||||||
| B | 40 | __ | 1/2" | Barbed Male | 150 psi @ 72° F | 32° to 105° | 31/32" | 4 1/2" | Polypropylene Plastic | Manual | 00000000 | 000000 |
| B | 40 | __ | 3/4" | Barbed Male | 150 psi @ 72° F | 32° to 105° | 31/32" | 4 1/2" | Polypropylene Plastic | Manual | 00000000 | 000000 |
| B | 40 | __ | 1" | Barbed Male | 150 psi @ 72° F | 32° to 105° | 31/32" | 4 1/2" | Polypropylene Plastic | Manual | 00000000 | 000000 |
Hydraulic Hose Nozzles
Nozzles allow you to control the flow while dispensing hydraulic fluid. They shut off manually, so you’ll have to release the trigger to stop the flow. Nozzles are aluminum, which is lightweight with good corrosion resistance.
Style A has a larger spout and a higher flow rate than Style B to dispense large quantities of hydraulic fluid quickly.
Style B is UL listed. It has an angled design, which reduces hose kinking for efficient fueling.
Warning: Do not leave nozzles unattended when in use.
For technical drawings and 3-D models, click on a part number.
Spout | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Max. Flow Rate, gpm | Pipe Size | Connection | Max. Pressure | Temperature Range, °F | OD | Lg. | Material | Shut-Off Type | Specifications Met | Each | |
| A | 60 | 1 1/2 | Threaded NPT Female | 50 psi @ 72° F | -40° to 300° | 1 7/8" | 8 3/8" | Aluminum | Manual | __ | 00000000 | 0000000 |
| B | 40 | 3/4 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 13/16" | 6" | Aluminum | Manual | UL Listed | 0000000 | 00000 |
| B | 40 | 1 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 13/16" | 6" | Aluminum | Manual | UL Listed | 0000000 | 00000 |
Coolant Hose Nozzles
Dispense and control the flow of coolant with these nozzles. They have a built-in check valve to reduce spillage when withdrawing the nozzle from the tank. Nozzles shut off manually, so you’ll have to release the trigger to stop the flow. They are brass for good corrosion resistance.
Warning: Do not leave nozzles unattended when in use.
For technical drawings and 3-D models, click on a part number.