Leveling Jacks
Mount these jacks to equipment to raise and level it.
Side Mount—Weld the included mount to equipment then attach the jack to the mount. A pin locks the jack in a vertical position; pull the pin to rotate the jack into a horizontal position when not in use.
Through-Hole Mount—Mount jacks through a hole in the frame of equipment and fasten the mounting plate. Jacks with triangular plate can also be welded onto your equipment. They’re commonly used with an A-frame trailer coupler.
Jacks with foot plate have extra stability.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Mounting | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | O'all Ht. | Handle Lg. | Body Material | For Hole Dia. | No. of Holes | Fasteners Included | Hole Dia. | Hole Lg. | Hole Wd. | Features | Each | ||
Side Mount with Rectangular Mounting Plate | ||||||||||||||||
Side Handle | ||||||||||||||||
| A | 1 | 2,000 | 10 7/8"-20 7/8" | 10" | 22 3/4" | 5 7/8" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 0000000 |
| A | 2 1/2 | 5,000 | 10 3/8"-20 3/8" | 10" | 22 7/8" | 6 1/2" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
| A | 2 1/2 | 5,000 | 15 3/8"-30 3/8" | 15" | 27 7/8" | 6 1/2" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
Top Handle | ||||||||||||||||
| A | 2 1/2 | 5,000 | 14 1/2"-29 1/2" | 15" | 27 1/2" | 7 5/8" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
Side Mount with Square Mounting Plate | ||||||||||||||||
Side Handle | ||||||||||||||||
| A | 1 | 2,000 | 15"-30 1/2" | 15 1/2" | 32 3/4" | 6 1/8" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
Top Handle | ||||||||||||||||
| A | 1 | 2,000 | 14 3/4"-29 3/4" | 15" | 30" | 6" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 00000 |
Side Mount with Tube Mounting Plate | ||||||||||||||||
Side Handle | ||||||||||||||||
| B | 1 | 2,000 | 10 7/8"-20 7/8" | 10" | 23" | 5 7/8" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
| B | 1 | 2,000 | 15"-30 1/2" | 15 1/2" | 32 3/4" | 6 1/8" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
| B | 2 1/2 | 5,000 | 10 1/2"-20 1/2" | 10" | 23" | 6 1/2" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
| B | 2 1/2 | 5,000 | 15 1/2"-30 1/2" | 15" | 28" | 6 1/2" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
| B | 3 1/2 | 7,000 | 11"-21" | 10" | 25 5/8" | 8 1/2" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
| B | 5 | 10,000 | 17"-29 5/8" | 12 5/8" | 39 1/2" | 13 1/2" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
Top Handle | ||||||||||||||||
| B | 2 1/2 | 5,000 | 11 1/4"-21 1/4" | 10" | 18" | 7 5/8" | Steel | __ | __ | __ | __ | __ | __ | Foot Plate | 0000000 | 000000 |
Through-Hole Mount with Triangular Mounting Plate | ||||||||||||||||
Top Handle | ||||||||||||||||
| C | 2 1/2 | 5,000 | 10 1/8"-25 1/8" | 15" | 24 1/8" | 7 5/8" | Steel | 2 1/4" | 3 | No | __ | 7/16" | 13/16" | Foot Plate | 0000000 | 00000 |
| D | 2 1/2 | 5,000 | 10 7/8"-25 7/8" | 15" | 24 3/8" | 7 5/8" | Steel | 2 1/4" | 3 | No | __ | 7/16" | 13/16" | __ | 0000000 | 000000 |
Through-Hole Mount with Round Mounting Plate | ||||||||||||||||
Top Handle | ||||||||||||||||
| E | 2 1/2 | 5,000 | 4 1/2"-13 1/2" | 9" | 19 3/4" | 8 3/4" | Steel | 1 1/4" | 6 | No | 1/4" | __ | __ | Foot Plate, Slip-Resistant Rubber Pad | 000000 | 00000 |
| E | 2 1/2 | 5,000 | 4 1/2"-21 1/2" | 17" | 27 3/4" | 8 7/8" | Steel | 1 1/4" | 6 | No | 1/4" | __ | __ | Foot Plate, Slip-Resistant Rubber Pad | 000000 | 000000 |
| E | 2 1/2 | 5,000 | 4 1/2"-25 1/2" | 21" | 31 3/4" | 8 3/4" | Steel | 1 1/4" | 6 | No | 1/4" | __ | __ | Foot Plate, Slip-Resistant Rubber Pad | 000000 | 000000 |
Leveling Jacks with Wheel
Mount these jacks to equipment to raise and level it. A swivel caster lets you reposition your load.
Side Mount—Slide the frame of your equipment through the mounting plate.
Through-Hole Mount—Mount jacks through a hole in the frame of your equipment and fasten the mounting plate. These jacks are commonly used with an A-frame trailer coupler.
Locking pin locks the jack in a vertical position; pull the pin to rotate the jack into a horizontal position when not in use.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | For Frame | Mounting | Mounting Plate | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | O'all Ht. | Ht. | Dp. | Handle Lg. | Body Material | For Hole Dia. | Fasteners Included | No. of Holes | Hole Lg. | Hole Wd. | Lg. | Wd. | Wheel Material | Each | ||
Side Mount | |||||||||||||||||||
| A | 1/4 | 750 | 7 1/2"-23 1/2" | 16" | 27 7/8" | 0"-5" | 1 7/8"-2 7/8" | 5 1/2" | Steel | __ | Yes | __ | __ | __ | __ | __ | Plastic | 000000 | 0000000 |
| B | 1/2 | 1,000 | 10 13/16"-25 1/2" | 14 11/16" | 33 7/8" | 3"-5" | 2"-3" | 6 1/8" | Steel | __ | Yes | __ | __ | __ | __ | __ | Plastic | 0000000 | 000000 |
Side Mount with Locking Pin | |||||||||||||||||||
| C | 1/2 | 1,200 | 12 1/2"-22 1/2" | 10" | 28 1/8" | 2"-4" | 1 1/2"-3" | 6" | Steel | __ | Yes | __ | __ | __ | __ | __ | Plastic | 0000000 | 000000 |
| C | 3/4 | 1,500 | 12 7/8"-22 7/8" | 10" | 31 5/8" | 3"-5" | 2"-3" | 6 1/8" | Steel | __ | Yes | __ | __ | __ | __ | __ | Plastic | 0000000 | 000000 |
Through-Hole Mount | |||||||||||||||||||
| D | 1/2 | 1,200 | 8 5/8"-21 1/2" | 12 7/8" | 35 5/8" | __ | __ | 6 1/2" | Steel | 2 1/4" | No | 3 | 7/16" | 13/16" | 5 1/8" | 4 1/4" | Plastic | 0000000 | 000000 |
Screw Jack Stands
Hold and adjust the height of heavy loads such as truck trailers. The screw adjustment lets you make small changes to the height of your load.
Note: Jack stands should not be moved when under load.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Cap. | Holding Cap. | Saddle | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | tons | lbs. | Ht. | Max. Lift | Lg. | Wd. | Base Dia. | Each | |
| 2 1/2 | 5,000 | 25 | 50,000 | 44"-51" | 7" | 5" | 5" | 14" | 0000000 | 0000000 |
Cap. | Holding Cap. | Saddle | Base | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | tons | lbs. | Ht. | Max. Lift | Dia. | Lg. | Wd. | Lg. | Wd. | Handle Lg. | Wheel Material | Features | Each | |
With Two Axle-Mounted Wheels | |||||||||||||||
| 20 | 40,000 | 50 | 100,000 | 39"-51" | 11 1/2" | 8" | __ | __ | 16" | 17 5/8" | 20" | Rubber | Removable Handle | 0000000 | 0000000 |
With Three Axle-Mounted Wheels | |||||||||||||||
| 20 | 40,000 | 50 | 100,000 | 40"-51" | 11 1/2" | __ | 24" | 6" | 16" | 17 5/8" | 20" | Rubber, Steel | Removable Handle | 0000000 | 000000 |
| Component | For Wheel Configuration | Wheel Material | Includes | Each | |
| Grip for Stationary Jack Stands | __ | __ | __ | 0000000 | 000000 |
| Grip for Mobile Jack Stands | Two Axle-Mounted Wheels, Three Axle-Mounted Wheels | __ | __ | 0000000 | 0000 |
| Handle for Mobile Jack Stands | Two Axle-Mounted Wheels, Three Axle-Mounted Wheels | __ | 1 Grip | 0000000 | 00000 |
| Saddle for Mobile Jack Stands | Two Axle-Mounted Wheels | __ | __ | 0000000 | 000000 |
| Wheel for Mobile Jack Stands | Three Axle-Mounted Wheels | Steel | __ | 0000000 | 00000 |
| Wheel Kit for Mobile Jack Stands | Two Axle-Mounted Wheels, Three Axle-Mounted Wheels | Rubber | 1 Axle, 1 Cotter Pin, 2 Wheels | 0000000 | 000000 |
Ratchet Jack Stands
The ratcheting action of these jacks stands makes adjusting them under load easier than screw jack stands. Use them to hold and adjust the height of heavy loads such as truck trailers.
Note: Jack stands should not be moved when under load.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Cap. | Holding Cap. | Saddle | Base | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | tons | lbs. | Ht. | Max. Lift | Dia. | Lg. | Wd. | Lg. | Wd. | Handle Lg. | Wheel Material | Features | Each | |
With Two Axle-Mounted Wheels | |||||||||||||||
| 20 | 40,000 | 50 | 100,000 | 39"-51" | 12" | 8" | __ | __ | 16" | 17 5/8" | 20" | Rubber | Removable Handle | 0000000 | 0000000 |
With Three Axle-Mounted Wheels | |||||||||||||||
| 20 | 40,000 | 50 | 100,000 | 40"-51" | 11 1/2" | __ | 24" | 6" | 16" | 17 5/8" | 20" | Rubber and Steel | Removable Handle | 0000000 | 000000 |
| Component | For Wheel Configuration | Wheel Material | Includes | Each | |
| Grip | Two Axle-Mounted Wheels, Three Axle-Mounted Wheels | __ | __ | 0000000 | 00000 |
| Handle | Two Axle-Mounted Wheels, Three Axle-Mounted Wheels | __ | 1 Grip | 0000000 | 00000 |
| Saddle | Two Axle-Mounted Wheels | __ | __ | 0000000 | 000000 |
| Wheel | Three Axle-Mounted Wheels | Steel | __ | 0000000 | 00000 |
| Wheel Kit | Two Axle-Mounted Wheels, Three Axle-Mounted Wheels | Rubber | 1 Axle, 1 Cotter Pin, 2 Wheels | 0000000 | 000000 |
Jack Stands—Not for Lifting
After raising a load, add these steel stands for support.
Locking handles lock the ratchet bar in place to support the load.
Locking pins are inserted through the riser to lock the bar in place.
Note: Do not raise or lower stands while under load. Always use stands in pairs and on a hard, flat surface.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity per Pair | Saddle | Base | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Ht. Adjustment Increments | Lg. | Wd. | Dia. | Lg. | Wd. | Pair | ||
Locking Handle | |||||||||||
| A | 6 | 12,000 | 12"-17 3/4" | 9/16" | 1" | 3 1/2" | __ | 7 1/2" | 8 1/4" | 0000000 | 000000 |
| A | 12 | 24,000 | 15 5/8"-23 3/4" | 11/16" | 1 1/4" | 4 1/4" | __ | 10 3/8" | 11 5/8" | 0000000 | 000000 |
Locking Pin | |||||||||||
| B | 12 | 24,000 | 19"-29 1/2" | 1 1/2" | 3" | 6" | 15 7/8" | __ | __ | 0000000 | 000000 |
| C | 44 | 88,000 | 13 7/8"-19 7/8" | 3" | 3" | 3 3/4" | __ | 11" | 11" | 0000000 | 000000 |