Thread Size Thread Size |
|---|
For Use On For Use On |
|---|
|
|
Flute Type Flute Type |
|---|
 | Spiral |
 | Straight |
 | Spiral Point |
Drill Bit Material Drill Bit Material |
|---|
|
Individual/Set Individual/Set |
|---|
|
Application Application |
|---|
|
Drill Bit Finish Drill Bit Finish |
|---|
|
Container Type Container Type |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Material Material |
|---|
|
Hex Shank Combination Drill Bits/Taps for Drills and Screwdrivers
With a drill bit point to drive into the workpiece, these taps can drill and tap holes in a single step. A 1/4" hex shank connects them directly to tools such as drills and power screwdrivers. They're made of high-speed steel and are for use on most metal and plastic.
Their spiral flutes keep chips clear by drawing them back toward the tap and out of the hole. All have a plug chamfer with 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping.
Uncoated taps are strong enough for most tapping jobs but have the shortest tool life. Titanium Nitride (TiN) coated taps resist heat and wear better than uncoated taps, letting them last up to twice as long.
For technical drawings and 3-D models, click on a part number.
Thread | Drill Bit | Plug Chamfer | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Lg. | Overall Lg. | Size | Decimal Size Equivalent | Point Angle | No. of Flutes | Thread Type | Pitch Dia. Limit | Hex Shank Size | Each | |
Uncoated High-Speed Steel | |||||||||||
| 4-40 | 3/8" | 2 7/8" | 43 ga. | 0.089" | 118° | 2 | UNC | H2 | 1/4" | 0000000 | 000000 |
| 5-40 | 5/16" | 1 27/64" | 7/64" | 0.1024" | 110° | 2 | UNC | Not Rated | 1/4" | 0000000 | 00000 |
| 6-32 | 7/16" | 3" | 36 ga. | 0.1065" | 118° | 2 | UNC | H3 | 1/4" | 0000000 | 00000 |
| 8-32 | 1/2" | 3 1/8" | 29 ga. | 0.136" | 118° | 2 | UNC | H3 | 1/4" | 0000000 | 00000 |
| 10-24 | 5/8" | 3 3/8" | 25 ga. | 0.1495" | 118° | 2 | UNC | H3 | 1/4" | 0000000 | 00000 |
| 10-32 | 5/8" | 3 3/8" | 21 ga. | 0.159" | 118° | 2 | UNF | H3 | 1/4" | 0000000 | 00000 |
| 12-24 | 1/2" | 1 39/64" | 11/64" | 0.1772" | 110° | 2 | UNC | Not Rated | 1/4" | 0000000 | 00000 |
| 1/4"-20 | 25/32" | 3 1/2" | 7 ga. | 0.201" | 118° | 2 | UNC | H3 | 1/4" | 0000000 | 00000 |
| 1/4"-28 | 25/32" | 3 1/2" | 3 ga. | 0.213" | 118° | 2 | UNF | H3 | 1/4" | 0000000 | 00000 |
| 5/16"-18 | 15/16" | 3 23/32" | F | 0.257" | 118° | 2 | UNC | H3 | 1/4" | 0000000 | 00000 |
| 5/16"-24 | 15/16" | 3 23/32" | I | 0.272" | 118° | 2 | UNF | H3 | 1/4" | 0000000 | 00000 |
| 3/8"-16 | 1 1/8" | 3 15/16" | 5/16" | 0.3125" | 118° | 2 | UNC | H3 | 1/4" | 0000000 | 00000 |
| 3/8"-24 | 1 1/8" | 3 15/16" | Q | 0.332" | 118° | 2 | UNF | H3 | 1/4" | 0000000 | 00000 |
| 7/16"-14 | 1 1/4" | 3 3/4" | U | 0.368" | 118° | 2 | UNC | H3 | 1/4" | 0000000 | 00000 |
| 7/16"-20 | 1 1/4" | 3 3/4" | 25/64" | 0.3906" | 118° | 2 | UNF | H3 | 1/4" | 0000000 | 00000 |
| 1/2"-13 | 1 3/8" | 4 1/16" | 27/64" | 0.4219" | 118° | 2 | UNC | H3 | 1/4" | 0000000 | 00000 |
| 1/2"-20 | 1 3/8" | 4 1/16" | 29/64" | 0.4531" | 118° | 2 | UNF | H3 | 1/4" | 0000000 | 00000 |
| 9/16"-18 | 1 5/8" | 5 1/2" | 33/64" | 0.509" | 118° | 4 | UNF | H3 | 1/4" | 0000000 | 00000 |
| 5/8"-11 | 1 3/4" | 5 1/16" | 17/32" | 0.5313" | 118° | 4 | UNC | H3 | 1/4" | 0000000 | 00000 |
| 5/8"-18 | 1 3/4" | 6 1/16" | 37/64" | 0.5781" | 118° | 4 | UNF | H3 | 1/4" | 0000000 | 00000 |
Titanium Nitride (TiN) Coated High-Speed Steel | |||||||||||
| 6-32 | 7/16" | 3" | 36 ga. | 0.1065" | 118° | 2 | UNC | H3 | 1/4" | 00000000 | 00000 |
| 8-32 | 1/2" | 3 1/8" | 29 ga. | 0.136" | 118° | 2 | UNC | H3 | 1/4" | 00000000 | 00000 |
| 10-24 | 5/8" | 3 3/8" | 25 ga. | 0.1495" | 118° | 2 | UNC | H3 | 1/4" | 00000000 | 00000 |
| 10-32 | 5/8" | 3 3/8" | 21 ga. | 0.159" | 118° | 2 | UNF | H3 | 1/4" | 00000000 | 00000 |
| 1/4"-20 | 25/32" | 3 1/2" | 7 ga. | 0.201" | 118° | 2 | UNC | H3 | 1/4" | 00000000 | 00000 |
| 1/4"-28 | 25/32" | 3 1/2" | 3 ga. | 0.213" | 118° | 2 | UNF | H3 | 1/4" | 00000000 | 00000 |
| 5/16"-18 | 15/16" | 3 23/32" | F | 0.257" | 118° | 2 | UNC | H3 | 1/4" | 00000000 | 00000 |
| 5/16"-24 | 15/16" | 3 23/32" | I | 0.272" | 118° | 2 | UNF | H3 | 1/4" | 00000000 | 00000 |
| 3/8"-16 | 1 1/8" | 3 15/16" | 5/16" | 0.3125" | 118° | 2 | UNC | H3 | 1/4" | 00000000 | 00000 |
| 3/8"-24 | 1 1/8" | 3 15/16" | Q | 0.332" | 118° | 2 | UNF | H3 | 1/4" | 00000000 | 00000 |
| 7/16"-14 | 1 1/4" | 3 3/4" | U | 0.368" | 118° | 2 | UNC | H3 | 1/4" | 00000000 | 00000 |
| 7/16"-20 | 1 1/4" | 3 3/4" | 25/64" | 0.3906" | 118° | 2 | UNF | H3 | 1/4" | 00000000 | 00000 |
| 1/2"-13 | 1 3/8" | 4 1/16" | 27/64" | 0.4219" | 118° | 2 | UNC | H3 | 1/4" | 00000000 | 00000 |
| 1/2"-20 | 1 3/8" | 4 1/16" | 29/64" | 0.4531" | 118° | 2 | UNF | H3 | 1/4" | 00000000 | 00000 |
| 9/16"-18 | 1 5/8" | 5 1/2" | 33/64" | 0.509" | 118° | 4 | UNF | H3 | 1/4" | 00000000 | 00000 |
| 5/8"-11 | 1 3/4" | 5 1/16" | 17/32" | 0.5313" | 118° | 4 | UNC | H3 | 1/4" | 00000000 | 00000 |
| 5/8"-18 | 1 3/4" | 6 1/16" | 37/64" | 0.5781" | 118° | 4 | UNF | H3 | 1/4" | 00000000 | 00000 |
Thread | Drill Bit | Plug Chamfer | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Lg. | Overall Lg. | Size | Decimal Size Equivalent | Point Angle | No. of Flutes | Pitch Dia. Limit | Hex Shank Size | Each | |
Uncoated High-Speed Steel | |||||||||||
| M3 | 0.5 | 9/32" | 1 27/64" | 3/32" | 0.0984" | 110° | 3 | Not Rated | 1/4" | 0000000 | 000000 |
| M4 | 0.7 | 1/2" | 3 1/8" | 3.3 mm | 0.1299" | 118° | 2 | D4 | 1/4" | 0000000 | 00000 |
| M5 | 0.8 | 5/8" | 3 3/8" | 4.2 mm | 0.1653" | 118° | 2 | D4 | 1/4" | 0000000 | 00000 |
| M6 | 1 | 25/32" | 3 1/2" | 5 mm | 0.1968" | 118° | 2 | D5 | 1/4" | 0000000 | 00000 |
| M7 | 1 | 15/16" | 3 23/32" | 6 mm | 0.2362" | 118° | 2 | D5 | 1/4" | 0000000 | 00000 |
| M8 | 1.25 | 15/16" | 3 23/32" | 6.7 mm | 0.2637" | 118° | 2 | D5 | 1/4" | 0000000 | 00000 |
| M10 | 1.5 | 1 1/8" | 3 15/16" | 8.5 mm | 0.3346" | 118° | 2 | D6 | 1/4" | 0000000 | 00000 |
| M12 | 1.25 | 1 3/8" | 5 1/16" | 10.8 mm | 0.4251" | 118° | 2 | D5 | 1/4" | 0000000 | 00000 |
| M12 | 1.75 | 1 3/8" | 4 1/16" | 10.2 mm | 0.4015" | 118° | 2 | D6 | 1/4" | 0000000 | 00000 |
| M14 | 1.5 | 1 5/8" | 5 1/2" | 12.5 mm | 0.4921" | 118° | 4 | D6 | 1/4" | 0000000 | 00000 |
| M14 | 2 | 1 5/8" | 5 1/2" | 12 mm | 0.4724" | 118° | 4 | D7 | 1/4" | 0000000 | 00000 |
| M16 | 2 | 1 3/4" | 6 1/16" | 14 mm | 0.5512" | 118° | 4 | D7 | 1/4" | 0000000 | 00000 |
Titanium Nitride (TiN) Coated High-Speed Steel | |||||||||||
| M3 | 0.5 | 3/16" | 1 27/64" | 3/32" | 0.0984" | 110° | 2 | Not Rated | 1/4" | 00000000 | 00000 |
| M4 | 0.7 | 1/2" | 3 1/8" | 3.3 mm | 0.1299" | 118° | 2 | D4 | 1/4" | 00000000 | 00000 |
| M5 | 0.8 | 5/8" | 3 3/8" | 4.2 mm | 0.1653" | 118° | 2 | D4 | 1/4" | 00000000 | 00000 |
| M6 | 1 | 25/32" | 3 1/2" | 5 mm | 0.1968" | 118° | 2 | D5 | 1/4" | 00000000 | 00000 |
| M8 | 1.25 | 15/16" | 3 23/32" | 6.7 mm | 0.2637" | 118° | 2 | D5 | 1/4" | 00000000 | 00000 |
| M10 | 1.5 | 1 1/8" | 3 15/16" | 8.5 mm | 0.3346" | 118° | 2 | D6 | 1/4" | 00000000 | 00000 |
| M12 | 1.75 | 1 3/8" | 4 1/16" | 10.2 mm | 0.4015" | 118° | 2 | D6 | 1/4" | 00000000 | 00000 |
| M16 | 2 | 1 3/4" | 6 1/16" | 14 mm | 0.5512" | 118° | 2 | D7 | 1/4" | 00000000 | 00000 |
Hex Shank Taps for Drills and Screwdrivers
Insert these taps directly into drills, power screwdrivers, and other tools that accept a 1/4" hex shank. They're made of high-speed steel and are for use on most metal and plastic. All have a plug chamfer with 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.
For technical drawings and 3-D models, click on a part number.
Thread | Drill Bit | Plug Chamfer | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Lg. | Overall Lg. | Size | Decimal Size Equivalent | No. of Flutes | Hex Shank Size | Each | |
Uncoated High-Speed Steel | |||||||||
| M3 | 0.5 | 7/16" | 1 5/16" | 2.5 mm | 0.0984" | 3 | 1/4" | 0000000 | 000000 |
| M3.5 | 0.6 | 3/8" | 1 5/16" | 2.9 mm | 0.1142" | 3 | 1/4" | 0000000 | 00000 |
| M4 | 0.7 | 1/2" | 1 3/8" | 3.3 mm | 0.1299" | 3 | 1/4" | 0000000 | 00000 |
| M5 | 0.8 | 5/8" | 1 7/16" | 4.2 mm | 0.1653" | 3 | 1/4" | 0000000 | 00000 |
| M6 | 0.75 | 11/16" | 1 15/32" | 5.2 mm | 0.2047" | 3 | 1/4" | 0000000 | 00000 |
| M6 | 1 | 11/16" | 1 9/16" | 5 mm | 0.1968" | 3 | 1/4" | 0000000 | 00000 |
| M7 | 1 | 5/8" | 1 1/2" | 6 mm | 0.2362" | 3 | 1/4" | 0000000 | 00000 |
| M8 | 0.75 | 3/4" | 1 9/16" | 7.2 mm | 0.2834" | 4 | 1/4" | 0000000 | 00000 |
| M8 | 1.25 | 3/4" | 1 9/16" | 6.7 mm | 0.2637" | 4 | 1/4" | 0000000 | 00000 |
| M10 | 1 | 13/16" | 1 5/8" | 8.9 mm | 0.3503" | 4 | 1/4" | 0000000 | 00000 |
| M10 | 1.5 | 13/16" | 1 5/8" | 8.5 mm | 0.3346" | 4 | 1/4" | 0000000 | 00000 |
Combination Drill Bit/Taps
Drill holes and cut threads without switching tools. Made of high-speed steel, these taps are for use on most metal and plastic. The square shank is compatible with tap holders for drill presses and milling machines. All have a plug chamfer with 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping.
Taps with spiral flutes keep chips clear by drawing them back toward the tap and out of the hole.
Uncoated taps are strong enough for most tapping jobs but have a shorter tool life. Titanium nitride (TiN) coated taps resist heat and wear better than uncoated taps, letting them last up to twice as long.
For technical drawings and 3-D models, click on a part number.
Thread | Drill Bit | Plug Chamfer | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size | Lg. | Overall Lg. | Size | Decimal Size Equivalent | Point Angle | Flute Type | Thread Type | Pitch Dia. Limit | Each | |
Uncoated High-Speed Steel | ||||||||||
| 4-40 | 3/8" | 1 7/8" | 43 ga. | 0.089" | 110° | Spiral | UNC | H2 | 0000000 | 000000 |
| 4-48 | 3/8" | 1 7/8" | 42 ga. | 0.0935" | 110° | Spiral | UNF | H2 | 0000000 | 00000 |
| 5-40 | 13/32" | 1 15/16" | 38 ga. | 0.1015" | 110° | Spiral | UNC | H2 | 0000000 | 00000 |
| 6-32 | 7/16" | 2" | 36 ga. | 0.1065" | 110° | Spiral | UNC | H3 | 0000000 | 00000 |
| 6-40 | 7/16" | 2" | 33 ga. | 0.113" | 110° | Spiral | UNF | H3 | 0000000 | 00000 |
| 8-32 | 1/2" | 2 1/8" | 29 ga. | 0.136" | 110° | Spiral | UNC | H3 | 0000000 | 00000 |
| 8-36 | 1/2" | 2 1/8" | 29 ga. | 0.136" | 110° | Spiral | UNF | H3 | 0000000 | 00000 |
| 10-24 | 5/8" | 2 3/8" | 25 ga. | 0.1495" | 110° | Spiral | UNC | H3 | 0000000 | 00000 |
| 10-32 | 5/8" | 2 3/8" | 21 ga. | 0.159" | 110° | Spiral | UNF | H3 | 0000000 | 00000 |
| 12-24 | 21/32" | 2 3/8" | 16 ga. | 0.177" | 110° | Spiral | UNC | H3 | 0000000 | 00000 |
| 12-28 | 21/32" | 2 3/8" | 15 ga. | 0.18" | 110° | Spiral | UNF | H3 | 0000000 | 00000 |
| 1/4"-20 | 25/32" | 2 1/2" | 7 ga. | 0.201" | 110° | Spiral | UNC | H3 | 0000000 | 00000 |
| 1/4"-28 | 25/32" | 2 1/2" | 3 ga. | 0.213" | 110° | Spiral | UNF | H3 | 0000000 | 00000 |
| 5/16"-18 | 15/16" | 2 27/32" | F | 0.257" | 110° | Spiral | UNC | H3 | 0000000 | 00000 |
| 5/16"-24 | 15/16" | 2 27/32" | I | 0.272" | 110° | Spiral | UNF | H3 | 0000000 | 00000 |
| 3/8"-16 | 1 1/16" | 3 3/8" | 5/16" | 0.3125" | 110° | Spiral | UNC | H3 | 0000000 | 00000 |
| 3/8"-24 | 1 1/16" | 3 3/8" | Q | 0.332" | 110° | Spiral | UNF | H3 | 0000000 | 00000 |
| 7/16"-14 | 1 1/4" | 3 3/4" | U | 0.368" | 110° | Spiral | UNC | H3 | 0000000 | 00000 |
| 7/16"-20 | 1 1/4" | 3 3/4" | 25/64" | 0.3906" | 110° | Spiral | UNF | H3 | 0000000 | 00000 |
| 1/2"-13 | 1 3/8" | 4 1/16" | 27/64" | 0.4219" | 110° | Spiral | UNC | H3 | 0000000 | 00000 |
| 1/2"-20 | 1 3/8" | 4 1/16" | 29/64" | 0.4531" | 110° | Spiral | UNF | H3 | 0000000 | 00000 |
| 5/8"-11 | 1 3/4" | 5 1/16" | 17/32" | 0.5313" | 110° | Straight | UNC | H3 | 0000000 | 000000 |
| 3/4"-10 | 2" | 6" | 21/32" | 0.6563" | 110° | Straight | UNC | H3 | 0000000 | 000000 |
Titanium Nitride (TiN) Coated High-Speed Steel | ||||||||||
| 4-40 | 3/8" | 1 7/8" | 43 ga. | 0.089" | 118° | Straight | UNC | H2 | 0000000 | 00000 |
| 6-32 | 7/16" | 2" | 36 ga. | 0.1065" | 118° | Straight | UNC | H3 | 0000000 | 00000 |
| 8-32 | 1/2" | 2 1/8" | 29 ga. | 0.136" | 118° | Straight | UNC | H3 | 0000000 | 00000 |
| 10-24 | 5/8" | 2 3/8" | 25 ga. | 0.1495" | 118° | Straight | UNC | H3 | 0000000 | 00000 |
| 10-32 | 5/8" | 2 3/8" | 21 ga. | 0.159" | 118° | Straight | UNF | H3 | 0000000 | 00000 |
| 1/4"-20 | 25/32" | 2 1/2" | 7 ga. | 0.201" | 118° | Straight | UNC | H3 | 0000000 | 00000 |
| 1/4"-28 | 25/32" | 2 1/2" | 3 ga. | 0.213" | 118° | Straight | UNF | H3 | 0000000 | 00000 |
| 5/16"-18 | 15/16" | 2 23/32" | F | 0.257" | 118° | Straight | UNC | H3 | 0000000 | 00000 |
| 3/8"-16 | 1 1/8" | 2 15/16" | 5/16" | 0.3125" | 118° | Straight | UNC | H3 | 0000000 | 00000 |
| 1/2"-13 | 1 3/8" | 4 1/16" | 27/64" | 0.4219" | 118° | Straight | UNC | H3 | 0000000 | 00000 |
Thread | Drill Bit | Plug Chamfer | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Lg. | Overall Lg. | Size | Decimal Size Equivalent | Point Angle | Flute Type | Pitch Dia. Limit | Each | |
Uncoated High-Speed Steel | ||||||||||
| M3 | 0.5 | 13/32" | 1 15/16" | 2.5 mm | 0.0984" | 110° | Spiral | D3 | 0000000 | 000000 |
| M4 | 0.7 | 1/2" | 2 1/8" | 3.3 mm | 0.1299" | 110° | Spiral | D4 | 0000000 | 00000 |
| M5 | 0.8 | 5/8" | 2 3/8" | 4.2 mm | 0.1653" | 110° | Spiral | D4 | 0000000 | 00000 |
| M6 | 1 | 25/32" | 2 1/2" | 5 mm | 0.1968" | 110° | Spiral | D5 | 0000000 | 00000 |
| M8 | 1.25 | 15/16" | 2 27/32" | 6.7 mm | 0.2637" | 110° | Spiral | D5 | 0000000 | 00000 |
| M10 | 1.5 | 1 1/16" | 3 3/8" | 8.5 mm | 0.3346" | 110° | Spiral | D6 | 0000000 | 00000 |
| M12 | 1.75 | 1 3/8" | 4 1/16" | 10.2 mm | 0.4015" | 110° | Spiral | D6 | 0000000 | 00000 |
Titanium Nitride (TiN) Coated High-Speed Steel | ||||||||||
| M3 | 0.5 | 13/32" | 1 15/16" | 2.5 mm | 0.0984" | 118° | Straight | D3 | 0000000 | 00000 |
| M4 | 0.7 | 1/2" | 2 1/8" | 3.3 mm | 0.1299" | 118° | Straight | D4 | 0000000 | 00000 |
| M5 | 0.8 | 5/8" | 2 3/8" | 4.2 mm | 0.1653" | 118° | Straight | D4 | 0000000 | 00000 |
| M6 | 1 | 25/32" | 2 1/2" | 5 mm | 0.1968" | 118° | Straight | D5 | 0000000 | 00000 |
| M8 | 1.25 | 15/16" | 2 23/32" | 6.7 mm | 0.2637" | 118° | Straight | D6 | 0000000 | 00000 |
Combination Drill Bit/Pipe and Conduit Thread Taps
Drill and thread holes for pipe and conduit without switching tools. Made of uncoated high-speed steel, these tools are for use on most metal and plastic. Their right-hand spiral flutes keep chips clear by drawing them back toward the tap and out of the hole. With a square shank, they're compatible with tap wrenches and tap holders for drill presses and milling machines. All have a plug chamfer with 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping of through holes.
Drill Bit | Plug Chamfer | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Thread Type | Threads Per Inch | Thread Lg. | Overall Lg. | Size | Decimal Size Equivalent | Point Angle | No. of Flutes | Each | |
Uncoated High-Speed Steel | ||||||||||
| 1/8 | NPTF | 27 | 3/4" | 2 7/8" | Q | 0.332" | 118° | 4 | 0000000 | 0000000 |
| 1/4 | NPTF | 18 | 1 1/16" | 3 5/16" | 7/16" | 0.4375" | 118° | 4 | 0000000 | 000000 |
| 3/8 | NPTF | 18 | 1 1/16" | 3 1/2" | 9/16" | 0.5625" | 118° | 4 | 0000000 | 000000 |
| 1/2 | NPTF | 14 | 1 3/8" | 4 3/8" | 45/64" | 0.7031" | 118° | 4 | 0000000 | 000000 |
| 3/4 | NPTF | 14 | 1 3/8" | 4 9/16" | 29/32" | 0.9063" | 118° | 6 | 0000000 | 000000 |
| 1 | NPTF | 11 1/2 | 1 3/4" | 5 3/8" | 1 9/64" | 1.1406" | 118° | 6 | 0000000 | 000000 |
Tap and Drill Bit Sets
Drill and tap a variety of hole sizes. These taps and drill bits are for use on metal and plastic.
Carbon steel taps are for thread repair and occasional tapping.
High-speed steel taps and drill bits have a longer tool life than carbon steel. Uncoated high-speed steel taps and drill bits are strong enough for most jobs but don’t last as long as other high-speed steel taps and drill bits. Use them for small-scale jobs. Titanium-nitride (TiN) coated taps resist heat and wear better than uncoated taps, letting them last up to twice as long. Titanium-nitride (TiN) coated drill bits last longer and can drill at higher speeds than uncoated and oxide-coated drill bits. Black-oxide coated and black-and-gold-oxide coated taps and drill bits cut with less friction than uncoated taps and drill bits.
Cobalt steel taps and drill bits have higher strength and wear resistance than carbon steel and high-speed steel taps and drill bits.
Taper-chamfer taps have 7-10 chamfered threads at the tip for cutting into the workpiece. They require less torque than other chamfer types, making them a good choice for starting threads and tapping through holes. However, a longer taper means that they cannot thread as close to the bottom of closed-end holes.
Plug-chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper chamfers. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.
Bottoming-chamfer taps cut into the workpiece with just 1-2 chamfered threads. This short chamfer lets them thread holes closer to the bottom than other taps, but they require more torque to start threads.
| No. of Pieces | Chamfer Type | Tap Sizes Included | No. of Flutes | Drill Bit Sizes Included | Drill Bit Material | Container Type | Includes | Each | |
Uncoated Carbon Steel Taps | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 13 | Plug | 1 each of sizes: 4-40 6-32 8-32 10-24 10-32 1/4"-20 | 3, 4 | 43 ga. 35 ga. 29 ga. 25 ga. 21 ga. 7 ga. | Black Oxide High-Speed Steel | Plastic Case | Tap Wrench | 0000000 | 000000 |
| 29 | Taper, Plug, Bottoming | 3 each of sizes: M3 × 0.50 mm M4 × 0.70 mm M5 × 0.80 mm M6 × 1.00 mm M8 × 1.25 mm M10 × 1.50 mm M12 × 1.75 mm | 3, 4 | 2.5 mm 3.3 mm 4.2 mm 5.0 mm 6.8 mm 8.5 mm 10.2 mm | Black Oxide High-Speed Steel | Metal Case | Tap Wrench | 0000000 | 000000 |
Uncoated High-Speed Steel Taps | |||||||||
| 10 | Plug | 1 each of sizes: 1/4"-20 5/16"-18 3/8"-16 7/16"-14 1/2"-13 | 4 | 27/64" 5/16" 7 ga. F U | Black Oxide High-Speed Steel | Plastic Pouch | __ | 00000000 | 00000 |
| 16 | Plug | 1 each of sizes: M3 × 0.50 mm M3.5 × 0.60 mm M4 × 0.70 mm M5 × 0.80 mm M6 × 1.00 mm M8 × 1.25 mm M10 × 1.50 mm M12 × 1.75 mm | 3, 4 | 2.5 mm 2.9 mm 3.3 mm 4.2 mm 5.0 mm 6.75 mm 8.5 mm 10.25 mm | Black Oxide High-Speed Steel | Plastic Pouch | __ | 0000000 | 000000 |
| 18 | Plug | 1 each of sizes: 6-32 8-32 10-24 10-32 1/4"-20 5/16"-18 3/8"-16 7/16"-14 1/2"-13 | 3, 4 | 27/64" 5/16" 36 ga 29 ga. 25 ga. 21 ga. 7 ga. F U | Uncoated High-Speed Steel | Metal Case | __ | 0000000 | 000000 |
| 18 | Plug | 1 each of sizes: 6-40 8-36 10-24 10-32 1/4"-28 5/16"-24 3/8"-24 7/16"-20 1/2"-20 | 3, 4 | 25/64" 29/64" 33 ga. 29 ga. 25 ga. 21 ga. 3 ga. I Q | Uncoated High-Speed Steel | Metal Case | __ | 0000000 | 000000 |
| 18 | Plug | 1 each of sizes: M2.5 × 0.45 mm M3 × 0.50 mm M3.5 × 0.60 mm M4 × 0.70 mm M5 × 0.80 mm M6 × 1.00 mm M8 × 1.25 mm M10 × 1.50 mm M12 × 1.75 mm | 3, 4 | 2.05 mm 2.5 mm 2.9 mm 3.3 mm 4.2 mm 5.0 mm 6.7 mm 8.5 mm 10.2 mm | Uncoated High-Speed Steel | Metal Case | __ | 00000000 | 000000 |
| 29 | Taper, Plug, Bottoming | 3 each of sizes: M3 × 0.50 mm M4 × 0.70 mm M5 × 0.80 mm M6 × 1.00 mm M8 × 1.25 mm M10 × 1.50 mm M12 × 1.75 mm | 3, 4 | 2.5 mm 3.3 mm 4.2 mm 5.0 mm 6.8 mm 8.5 mm 10.2 mm | Black Oxide High-Speed Steel | Metal Case | Tap Wrench | 0000000 | 000000 |
| 36 | Plug | 1 each of sizes: 6-32 6-40 8-32 8-36 10-24 10-32 12-24 12-28 1/4"-20 1/4"-28 5/16"-18 5/16"-24 3/8"-24 3/8"-16 7/16"-14 7/16"-20 1/2"-13 1/2"-20 | 3, 4 | 1 each of sizes: 25/64" 27/64" 29/64" 5/16" 36 ga 33 ga. 25 ga. 21 ga. 16 ga. 15 ga. 7 ga. 3 ga. F I Q U 2 each of size 29 ga. | Black Oxide High-Speed Steel | Metal Case | __ | 0000000 | 000000 |
Uncoated Cobalt Steel Taps | |||||||||
| 18 | Plug | 1 each of sizes: 6-32 8-32 10-24 10-32 1/4"-20 5/16"-18 3/8"-16 7/16"-14 1/2"-13 | 2, 3 | 27/64" 5/16" 36 ga 29 ga. 25 ga. 21 ga. 7 ga. F U | Uncoated Cobalt Steel | Metal Case | __ | 0000000 | 000000 |
Black Oxide High-Speed Steel Taps | |||||||||
| 18 | Plug | 1 each of sizes: 6-32 8-32 10-24 10-32 1/4"-20 5/16"-18 3/8"-16 7/16"-14 1/2"-13 | 3, 4 | 27/64" 5/16" 36 ga 29 ga. 25 ga. 21 ga. 7 ga. F U | Black and Gold Oxide High-Speed Steel | Metal Case | __ | 00000000 | 000000 |
Titanium Nitride (TiN) Coated High-Speed Steel Taps | |||||||||
| 18 | Plug | 1 each of sizes: 6-32 8-32 10-24 10-32 1/4"-20 5/16"-18 3/8"-16 7/16"-14 1/2"-13 | 3, 4 | 27/64" 5/16" 36 ga 29 ga. 25 ga. 21 ga. 7 ga. F U | Titanium Nitride (TiN) Coated High-Speed Steel | Metal Case | __ | 00000000 | 000000 |
Hex-Shank Combination Drill Bit/Tap Sets for Drills and Screwdrivers
Drill and tap holes in a range of diameters. With a drill bit point to drive into the workpiece, these tools can drill and tap holes in a single step. Connect them directly to drills, power screwdrivers, and other tools that accept a 1/4" hex shank. They're made of high-speed steel and are for use on most metal and plastic. Their spiral flutes keep chips clear by drawing them back toward the tap and out of the hole. Recommended for use in through holes, all have a plug chamfer with 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping.
Titanium nitride (TiN) coated taps last longer and can drill at higher speeds than uncoated taps.
For technical drawings and 3-D models, click on a part number.
| No. of Pieces | Chamfer Type | Tap Sizes Included | No. of Flutes | Drill Bit Sizes Included | Container Type | Includes | Each | |
Titanium Nitride (TiN) Coated High-Speed Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
| 7 | Plug | 6-32 8-32 10-24 1/4"-20 5/16"-18 3/8"-16 | 2 | 5/16" 36 ga. 29 ga. 25 ga. 7 ga. F | Fabric Pouch | Chuck | 0000000 | 0000000 |
Uncoated High-Speed Steel | ||||||||
| 7 | Plug | 6-32 8-32 10-24 1/4"-20 5/16"-18 3/8"-16 | 2 | 5/16" 36 ga. 29 ga. 25 ga. 7 ga. F | Fabric Pouch | Chuck | 0000000 | 000000 |
| 7 | Plug | M3 × 0.5 mm M4 × 0.7 mm M5 × 0.8 mm M6 × 1.0 mm M8 × 1.25 mm M10 × 1.5 mm | 2 | 3/32" 1/8" 11/64" 13/64" 17/64" 31/64" | Plastic Case | Chuck | 0000000 | 000000 |
Hex-Shank Tap and Drill Bit Sets for Drills and Screwdrivers
All taps and drill bits have a hex shank for direct connection to tools such as drills and power screwdrivers. They're made of high-speed steel and are for use on most metal and plastic. Taps have a plug chamfer with 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping, but they’ll need space at the bottom of closed-end holes for chips to accumulate.
| No. of Pieces | Chamfer Type | Tap Sizes Included | Overall Lg. | No. of Flutes | Drill Bit Sizes Included | Drill Bit Material | Container Type | Includes | Each | |
Uncoated High-Speed Steel | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 13 | Plug | M3 × 0.5 mm M4 × 0.7 mm M5 × 0.8 mm M6 × 1.0 mm M8 × 1.25 mm M10 × 1.5 mm | 1 19/64" 1 27/64" 1 35/64" 1 37/64" | 3, 4 | 2.5 mm 3.3 mm 4.2 mm 5.0 mm 6.8 mm 8.5 mm | Uncoated High-Speed Steel | Plastic Case | Chuck | 0000000 | 0000000 |
Chip-Clearing Tap and Drill Bit Sets for Through-Holes
Also known as gun taps, the taps in these sets have spiral-point flutes that push chips ahead of the tap and out of through holes. Because they don't need to be reversed to prevent buildup, they produce threads more efficiently than standard taps and are suitable for production work. Taps have a square shank for compatibility with tap wrenches and tap holders for drill presses and milling machines. With a plug chamfer, they have 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping. All taps and drill bits are made of high-speed steel for use on most metal and plastic.
| No. of Pieces | Chamfer Type | Tap Sizes Included | Thread Type | No. of Flutes | Pitch Dia. Limit | Drill Bit Sizes Included | Drill Bit Material | Container Type | Each | |
Uncoated High-Speed Steel | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 18 | Plug | 6-32 8-32 10-24 10-32 1/4"-20 5/16"-18 3/8"-16 7/16"-14 1/2"-13 | UNC, UNF | 2, 3 | H3 | 27/64" 5/16" 36 ga. 29 ga. 25 ga. 21 ga. 7 ga. F U | Black Oxide High-Speed Steel | Metal Case | 00000000 | 0000000 |
Gold Oxide High-Speed Steel | ||||||||||
| 18 | Plug | 6-40 8-36 10-24 10-32 1/4"-28 5/16"-24 3/8"-24 7/16"-20 1/2"-20 | UNF | 2, 3 | H2, H3 | 29/64" 25/64" 33 ga. 29 ga. 25 ga. 21 ga. 3 ga. I Q | Gold Oxide High-Speed Steel | Metal Case | 00000000 | 000000 |
| 18 | Plug | M2.5 × 0.45 mm M3 × 0.5 mm M3.5 × 0.6 mm M4 × 0.7 mm M5 × 0.8 mm M6 × 1.00 mm M8 × 1.25 mm M10 × 1.5 mm M12 × 1.75 mm | Metric | 2, 3 | D3, D4, D5, D6 | 2.05 mm 2.5 mm 2.9 mm 3.3 mm 4.2 mm 5 mm 6.7 mm 8.5 mm 10.2 mm | Gold Oxide High-Speed Steel | Metal Case | 00000000 | 000000 |
Hex-Shank Tap Sets for Drills and Screwdrivers
Multiple tap sizes allow tapping a range of hole diameters. The taps in these sets connect directly to the included screwdriver and other tools that accept a 1/4" hex shank, such as drills and power screwdrivers. They're made of high-speed steel and are for use on most metal and plastic. With a plug chamfer, they're good for start-to-finish tapping, but they'll require space at the bottom of closed-end holes for chips to accumulate.
For technical drawings and 3-D models, click on a part number.
| No. of Pieces | Chamfer Type | Tap Sizes Included | No. of Flutes | Hex Shank Size | Includes | Each | |
Uncoated High-Speed Steel | |||||||
|---|---|---|---|---|---|---|---|
| 8 | Plug | M3 × 0.5 mm M4 × 0.7 mm M5 × 0.8 mm M6 × 1.0 mm M8 × 1.25 mm M10 × 1.5 mm | 4 | 1/4" | 1/4" Hex Shank Extension, 1/4" Bit Screwdriver | 0000000 | 0000000 |
Tap, Die, and Drill Bit Sets
Cut and repair threads and drill holes in many different sizes. Tap and die wrenches are included. The dies are hex shaped for use with conventional wrenches. The taps are made of carbon steel and are recommended for thread repair and occasional tapping.
Taper-chamfer taps have 7-10 chamfered threads at the tip for cutting into the workpiece. They require less torque than other chamfer types, making them a good choice for starting threads and tapping through holes. However, a longer taper means that they cannot thread as close to the bottom of closed-end holes
Plug-chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper chamfers. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.
| No. of Pieces | Tap Sizes Included | Die Sizes Included | Drill Bit Sizes Included | Container Type | Includes | Each | |
Carbon Steel | |||||||
|---|---|---|---|---|---|---|---|
Right-Hand Thread | |||||||
| 117 | 4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, and M12 × 1.75 mm | 4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, and M12 × 1.75 mm | 5/64", 7/64", 5/32", 1/4", 19/64", 5/16", 21/64", 3/8", 25/64", 13/32", 27/64", 29/64", 43 ga., 39 ga., 36 ga., 30 ga., 29 ga., 25 ga., 21 ga., 20 ga., 16 ga., 9 ga., 7 ga., 3 ga., B, F, H, I, J, O, Q, R, S, U, and Z | Plastic Case | Die Wrench (2), Extractor (5), Tap Wrench (3), Thread Gauge (2) | 00000000 | 0000000 |