Plastic Syringes
Made of plastic, these syringes are shatter resistant and suitable for use with a variety of liquids. However, they’re not as scratch resistant as glass or stainless steel syringes and less precise than glass ones.
Syringes with a luer lock connection have a more secure needle connection than syringes with a luer slip connection. They connect to needles with a luer lock connection to dispense contents. Twist the needle into place to secure the hold. Syringes with a luer slip connection connect to needles with a luer lock connection simply by sliding the needle onto the fitting—it will be held in place by friction rather than a locking mechanism.
Autoclavable syringes can be sterilized for reuse. Repeated sterilization may lead to discoloration over time.
For technical drawings and 3-D models, click on a part number.
Plastic Syringes with Taper Tip
No need to connect a needle or tip—just trim the opening size of these syringes to the diameter you need. Widen the opening of the tip for increased flow when dispensing thick liquids.
For technical drawings and 3-D models, click on a part number.
Capacity | Barrel | Each | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
ml | fl. oz. | Graduation Marks | Tip ID | OD | ID | Lg. | Material | Piston Material | Autoclavable | Each | |
Taper Tip | |||||||||||
Clear | |||||||||||
100 | 3.4 | 1 ml | 0.290" | 1.35" | 1.25" | 7 13/16" | Polypropylene Plastic | Silicone Rubber | Yes | 00000000 | 00000 |
Stainless Steel Syringes
Dispense corrosive liquids with these syringes. They're made of stainless steel, so they're not only highly chemical resistant but also extremely durable—they're our longest-lasting syringes. Because they're so durable, you can use them at high pressures. When used at or below their maximum pressure, they’re leak-free. However, you can't see what's inside like you can with glass and plastic syringes, so it's hard to confirm how much is inside and check for air bubbles.
Before autoclaving these syringes, disassemble them. Keep in mind that autoclaving can reduce their lifespan, so chemical sterilization is preferred.
Syringes with a luer lock connection require a luer lock needle to dispense contents. Twist the needle in place for a secure hold.
Syringes with a tube connection can be inserted to the mouth of a tube. They’re good for drawing liquid or gas out of a tube.
For technical drawings and 3-D models, click on a part number.
Capacity | Barrel | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
ml | fl. oz. | For Tube OD | Graduation Marks | OD | ID | Lg. | Max. Pressure, psi | Material | Autoclavable | Compatible With | Each | |
Luer Lock Connection | ||||||||||||
100 | 3.38 | __ | 10 ml | 1.50" | 1.37" | 6 3/4" | 700 | 316 Stainless Steel | Yes | __ | 0000000 | 000000000 |
Tube Connection | ||||||||||||
100 | 3.38 | 1/16" | 10 ml | 1.50" | 1.37" | 6 3/4" | 700 | 316 Stainless Steel | Yes | Swagelok® | 0000000 | 00000000 |
100 | 3.38 | 1/8" | 10 ml | 1.50" | 1.37" | 6 3/4" | 700 | 316 Stainless Steel | Yes | Swagelok® | 0000000 | 00000000 |
100 | 3.38 | 1/4" | 10 ml | 1.50" | 1.37" | 6 3/4" | 700 | 316 Stainless Steel | Yes | Swagelok® | 0000000 | 00000000 |
Gas Sampling Glass Syringes
Collect, transport, and store gas and liquid samples without worrying about evaporation or leaks. These syringes have a locking valve that keeps your sample secure. They also have a piston that creates a leak-free, gastight seal against the barrel.
With a glass barrel, these syringes have a long lifespan and aren’t likely to wear or warp from your samples. They have a tighter tolerance than syringes with plastic barrels, so they’re better at controlling small, precise flows. They’ll dispense all material inside with nothing left over—the needle sits exactly at the zero graduation mark, and the piston’s seal against the barrel wipes off any deposits from liquids. With no deposits, the plunger won’t get stuck while dispensing. The piston’s seal is also tight enough that the plunger won’t retract on its own, so you can dispense from these syringes in a slow, controlled manner. Thanks to their precision, these syringes are often used for gas chromatography.
To attach the needle, slide it in at the base of these syringes and secure it with its locking nut. Made of stainless steel, the needle has a smooth surface that limits friction. It’s also sharp and beveled so it can be inserted without clogging or leaving a hole. This makes it ideal for puncturing septa lids.
For technical drawings and 3-D models, click on a part number.
Capacity | Barrel | Needle | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ml | fl. oz. | Graduation Marks | OD | ID | Lg. | Material | Piston Material | Gauge | Lg. | ID | OD | Material | Color | Features | Each | |
Push-to-Fit Connection | ||||||||||||||||
Straight Needle with Sharp Beveled Tip | ||||||||||||||||
100 | 3.381 | 0.5 ml | 1.45" | 1.28" | 5 13/16" | Borosilicate Glass | PTFE Plastic | 22 | 2" | 0.016" | 0.028" | 304 Stainless Steel | Clear | Locking Valve | 0000000 | 0000000 |
Needle | Base | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Gauge | Lg. | ID | OD | Material | Material | Color | Autoclavable | Pkg. Qty. | Pkg. | |
Straight Needle with Blunt Flat Tip | ||||||||||
22 | 2" | 0.016" | 0.028" | 304 Stainless Steel | Plastic | Silver | Yes | 6 | 0000000 | 000000 |
26 | 2" | 0.010" | 0.018" | 304 Stainless Steel | Plastic | Silver | Yes | 6 | 0000000 | 00000 |
Straight Needle with Sharp Beveled Tip | ||||||||||
22 | 2" | 0.016" | 0.028" | 304 Stainless Steel | Plastic | Silver | Yes | 6 | 0000000 | 00000 |
26 | 2" | 0.010" | 0.018" | 304 Stainless Steel | Plastic | Silver | Yes | 6 | 0000000 | 00000 |