McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    71 Products

    T-Handle Tap Wrenches
    3D CAD models available

    Use with a tap to thread holes by hand. These wrenches are more compact than straight-handle tap wrenches, so they can be used to tap in tighter spaces. However, they provide less leverage.
    Tap Wrenches
    Image of Product. Top orientation. Tap Wrenches. T-Handle Tap Wrenches.
    Sliding Ratcheting Handle—Sliding ratcheting handle moves from side to side and can lock in a fixed position. It adjusts for right- or left-hand ratcheting.
    Tap Wrench
    Jaws Sets
    For Tap Size
    For Tap Pipe
    Size
    For Square
    Shank Size
    Lg.
    Material
    Each
    Each
    Fixed Handle
    No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 3/16", 7/32", 1/4", M1.6, M1.8, M2, M2.2, M2.5, M3, M3.5, M4, M4.5, M5, M6, M6.3__0.11" to 0.191"3 1/2"Steel0000000000000__00
    No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 3/16", 7/32", 1/4", M1.6, M1.8, M2, M2.2, M2.5, M3, M3.5, M4, M4.5, M5, M6, M6.3__0.11" to 0.191"8 3/4"Steel000000000000__00
    1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", M6, M6.3, M7, M8, M9, M10, M11, M12, M12.51/16, 1/80.191" to 0.275"3 5/8"Steel000000000000__00
    1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", M6, M6.3, M7, M8, M9, M10, M11, M12, M12.51/16, 1/80.191" to 0.275"10 5/8"Steel000000000000__00
    1/2", 9/16", 5/8", 11/16", 3/4", M13, M14, M15, M16, M17, M18, M19, M20__0.275" to 0.442"5"Steel000000000000__00
     
    Sliding Handle
    No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 1/4", M1.6, M2, M2.5, M3, M3.5, M4, M4.5, M5, M6__0.11" to 0.191"3 1/2"Steel000000000000__00
    No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 1/4", M1.6, M2, M2.5, M3, M3.5, M4, M4.5, M5, M6__0.11" to 0.191"8 3/4"Steel000000000000__00
    1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", M6, M6.3, M7, M8, M9, M10, M11, M12, M12.51/16, 1/80.191" to 0.275"4"Steel000000000000__00
    1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", M6, M6.3, M7, M8, M9, M10, M11, M12, M12.51/16, 1/80.191" to 0.275"10 5/8"Steel000000000000__00
     
    Sliding Ratcheting Handle
    No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 3/16", 7/32", 1/4", M1.6, M1.8, M2, M2.2, M2.5, M3, M3.5, M4, M4.5, M5, M6, M6.3__0.078" to 0.203"3 1/2"Steel0000000000000000000000000
    No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 3/16", 7/32", 1/4", M1.6, M1.8, M2, M2.2, M2.5, M3, M3.5, M4, M4.5, M5, M6, M6.3__0.078" to 0.203"10"Steel000000000000000000000000
    1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", M6, M6.3, M7, M8, M9, M10, M11, M12, M12.5__0.188" to 0.313"12"Steel00000000000__00
    1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", M6, M6.3, M7, M8, M9, M10, M11, M12, M12.51/16, 1/80.188" to 0.313"4 1/4"Steel00000000000__00
    1/2", 9/16", 5/8", 11/16", 3/4", M13, M14, M15, M16, M17, M18, M19, M20__0.344" to 0.5"4 1/2"Steel000000000000__00
     
    Tap Wrenches with Aligner
    Image of Product. Front orientation. Contains Annotated. Tap Wrenches with Aligner. T-Handle Tap Wrenches.
    Wrenches with aligner square your tap to your work surface for proper alignment and reduced tap breakage. A V-groove at the base provides stability on round surfaces.
    Tap Wrench
    Jaws Sets
    For Tap Size
    For Square
    Shank Size
    Lg.
    Includes
    Material
    Each
    Each
    Sliding Handle
    No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", M1.6, M1.8, M2, M2.2, M2.5, M3, M3.5, M4, M4.5, M5, M6, M6.3, M7, M8, M9, M10, M11, M12, M12.50.11" to 0.275"4 1/4"AlignerSteel00000000000000000000000000
     
    Machine-Mount Tap Wrenches
    Image of Attribute. Front orientation. Machine-Mount Tap Wrenches. T-Handle Tap Wrenches.

    Machine-mount wrenches have a guide shank that fits into the chuck on your drill press and holds the tap steady. Use them after drilling to thread holes manually without moving the workpiece.
    Sliding Handle—Sliding handle moves from side to side to allow tapping in spaces where fixed handles don't have room to turn.
    For Tap Size
    For Tap Pipe
    Size
    For Square
    Shank Size
    Lg.
    Includes
    Material
    Each
    Sliding Handle
    No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 1/4", M1.6, M2, M2.5, M3, M3.5, M4, M4.5, M5, M6__0.11" to 0.191"3 1/2"Guide with 1/2" dia. shankSteel0000000000000
    1/4", 5/16", 3/8", 7/16", 1/2", M6, M7, M8, M10, M121/16, 1/80.191" to 0.275"4"Guide with 1/2" dia. shankSteel000000000000
    1/2", 9/16", 5/8", 11/16", 3/4", M12, M12.5, M14, M15, M16, M18, M191/16, 1/80.275" to 0.442"4 1/4"Guide with 5/8" dia. shankSteel000000000000
    3/4", 13/16", 7/8", 15/16", 1", M19, M20, M22, M22.5, M24, M251/4
    0.442" to 0.6"5"Guide with 3/4" dia. shankSteel0000000000000
     

    Starrett T-Handle Tap Wrenches
    3D CAD models available

    Image of Product. Front orientation. Tap Wrenches. Starrett T-Handle Tap Wrenches.
    With a T-handle design, these wrenches are more compact than straight-handle tap wrenches but provide less leverage. The handle slides from side to side to allow tapping in spaces where fixed handles don't have room to turn.
    Mfr. Model
    No.
    For Tap Size
    For Tap Pipe
    Size
    For Square
    Shank Size
    Lg.
    Material
    Each
    Sliding Handle
    93A1/16", 1/8", 3/16", M1.6, M1.8, M2, M2.2, M2.5, M3, M3.5, M4, M4.5__0.063" to 0.156"2"Steel000000000000000
    93B7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", M5.5, M6, M6.3, M7, M8, M9, M10, M11__0.156" to 0.25"2 1/2"Steel00000000000000
    93C1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", M6, M6.3, M7, M8, M9, M10, M11, M12, M12.51/16, 1/80.188" to 0.313"3 1/2"Steel00000000000000
     

    Economy T-Handle Tap Wrenches
    3D CAD models available

    Image of Product. Front orientation. Tap Wrenches. Economy T-Handle Tap Wrenches.
    Connect a tap to these wrenches for occasional or light-duty hand tapping. All have a T-handle design, so they're more compact than straight-handle tap wrenches but provide less leverage. The handle slides from side to side to allow tapping in spaces where fixed handles don't have room to turn.
    For Tap Size
    For Square
    Shank Size
    Lg.
    Includes
    Material
    Each
    Sliding Handle
    No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 3/16", 7/32", 1/4", M3, M3.5, M4, M4.5, M5, M6, M6.30.11" to 0.191"2 3/8"__Steel0000000000000
    1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", M6, M6.3, M7, M8, M9, M10, M11, M12, M12.50.191" to 0.275"3 1/2"__Steel0000000000000
    1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", M6, M6.3, M7, M8, M9, M10, M11, M12, M12.50.191" to 0.275"3 1/2"3/8" Square-Drive SocketSteel0000000000000
     

    Straight-Handle Tap Wrenches
    3D CAD models available

    Image of Product. Front orientation. Tap Wrenches. Straight-Handle Tap Wrenches.
    Use with a tap to thread holes by hand. These tools have long handles to provide more leverage than T-handle wrenches, but they require more space for tapping.
    For Tap Size
    For Tap Pipe Size
    For Square
    Shank Size
    Lg.
    Material
    Each
    Fixed Handle
    No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 1/8", 3/16", 7/32", 1/4", M1.6, M1.8, M2, M2.2, M2.5, M3, M3.5, M4, M4.5, M5, M6, M6.3__0.11" to 0.191"7"Steel0000000000000
    No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 1/8", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", M1.6, M1.8, M2, M2.2, M2.5, M3, M3.5, M4, M4.5, M5, M6, M6.3, M7, M8, M9, M10__0.11" to 0.286"9"Steel000000000000
    No. 8, No. 10, No. 12, 1/8", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", M4, M4.5, M5, M6, M6.3, M7, M8, M9, M10, M11, M12, M12.51/16, 1/80.131" to 0.275"11"Steel0000000000000
    No. 8, No. 10, No. 12, 1/8", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", 9/16", 5/8", 11/16", 3/4", M4, M4.5, M5, M6, M6.3, M7, M8, M9, M10, M11, M12, M12.5, M14, M15, M16, M18, M191/8, 1/40.131" to 0.442"15"Steel0000000000000
    1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8", M6, M6.3, M7, M8, M9, M10, M11, M12, M12.5, M14, M15, M16, M18, M20, M22, M22.5, M24, M26, M27, M281/8, 1/4, 3/8, 1/2, 3/40.191" to 0.672"19"Steel0000000000000
    3/4", 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 3/16", 1 1/4", 1 5/16", 1 3/8", 1 1/2", 1 5/8", M19, M20, M22, M22.5, M24, M26, M27, M30, M33, M35, M36, M37, M403/8, 1/2, 3/4, 1, 1 1/40.442" to 0.979"40"Steel0000000000000
    1", 1 1/16", 1 1/8", 1 3/16", 1 1/4", 1 5/16", 1 3/8", 1 1/2", 1 5/8", 1 3/4", 1 7/8", 2", 2 1/4", 2 1/2", M25, M26, M27, M30, M33, M35, M36, M37, M40, M42, M47, M563/4, 1, 1 1/4, 1 1/2, 20.6" to 1.575"54"Steel0000000000000
     

    Economy Straight-Handle Tap Wrenches
    3D CAD models available

    Image of Product. Front orientation. Tap Wrenches. Economy Straight-Handle Tap Wrenches.
    For occasional or light-duty hand tapping, connect a tap to these wrenches. They have long handles to provide more leverage than T-handle wrenches, but they require more space for tapping.
    For Tap Size
    For Tap Pipe
    Size
    For Square
    Shank Size
    Lg.
    Material
    Each
    Fixed Handle
    No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 1/8", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", M1.6, M1.8, M2, M2.2, M2.5, M3, M3.5, M4, M4.5, M5, M6, M6.3, M7, M8, M9, M10, M11, M12, M12.5__0.11" to 0.275"9"Steel00000000000000
    1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", M3, M3.5, M4, M4.5, M5, M6, M6.3, M7, M8, M9, M10, M11, M12, M12.51/8, 1/40.191" to 0.6"18"Steel0000000000000
     

    Air-Powered Tap Wrenches

    Image of Product. Front orientation. Tap Wrenches. Air-Powered Tap Wrenches.
    Powered by compressed air, these tap wrenches thread holes faster and with less effort than manual tap wrenches. They’re often used in place of manual tap wrenches when threading many holes and hard materials. Compared to drill presses and CNC machines, which are stationary, these wrenches are portable so you can take them to the part that needs to be threaded. To remove chips from your hole, press the reverse button to rotate the tap counterclockwise. Switch different taps in and out of the chuck when your tap is worn down or you need a new size. Use with machine tool taps and tapping lubricants for best results.
    Air Inlet
    For Tap Size
    For Square
    Shank Size
    Max. Torque,
    in·lbf
    No. of
    Speeds
    Max. No-Load
    Rotational
    Speed, rpm
    Recommended Operating
    Air Pressure, psi
    Average Air Consumption
    @ Pressure
    Pipe
    Size
    Thread
    Type
    Gender
    For Air
    Hose ID
    Exhaust
    Location
    Lg.
    Wt.,
    lb.
    Each
    No. 10, No. 12, 1/4", 5/16", M5, M6, M7, M80.191" to 0.313"40013009030 ft³/min @ 90 psi1/4
    NPT
    Female3/8"Handle7 1/4"2.900000000000000
    1/4", 5/16", 3/8", 7/16", 1/2", M6, M7, M8, M9, M10, M11, M12, M130.25" to 0.5"40013009030 ft³/min @ 90 psi1/4
    NPT
    Female3/8"Handle7 1/4"2.90000000000000
     

    Mounted Tap Wrenches

    Image of Product. Front orientation. Contains Annotated. Tap Wrenches. Mounted Tap Wrenches, 8 1/2" Long Base.
    Image of Product. Front orientation. Contains Annotated. Tap Wrenches. Mounted Tap Wrenches, 13" Long Base.

    8 1/2" Long Base

    13" Long Base

    Also known as hand tappers, these wrenches mount to a flat surface for stability and guide the tap straight into the hole for accurate threading.
    Base
    For Tap Size
    Lg.
    Wd.
    Throat
    Dp.
    Clearance
    Over Base
    Overall
    Ht.
    Includes
    Material
    Each
    No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 1/4", 5/16"8 1/2"6"4 1/2"3 3/4"9"Seven Holders, Spindle Wrench, Tap Guide, Work TableSteel00000000000000
    No. 8, No. 10, 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4"13"8"7 1/2"7"14"Nine Holders, Removable Spindle Wrench, Tap Guide, Work TableSteel0000000000000
     

    Die Wrenches

    Also known as die stocks, these wrenches grip round or hex-shaped dies so you can turn them by hand. All include at least one set screw for securing the die.
    For Round Dies
    Image of Product. Front orientation. Die Wrenches. For Round Dies.
    For Die
    OD
    Lg.
    Handle
    Material
    Die Holder
    Material
    Includes
    Each
    13/16"7"SteelCast SteelThree Set Screws0000000000000
    1"8"SteelCast SteelThree Set Screws000000000000
    1 1/2"12 1/2"SteelCast SteelThree Set Screws0000000000000
    2"15"SteelCast SteelThree Set Screws0000000000000
    2 1/2"20"SteelCast SteelThree Set Screws0000000000000
    3"22"SteelCast SteelThree Set Screws0000000000000
    4"29"SteelSteelThree Set Screws00000000000000
    5"33"SteelSteelThree Set Screws00000000000000
    For Hex Dies
    Image of Product. Front orientation. Die Wrenches. For Hex Dies.
    Image of Attribute. Front orientation. Contains Annotated.
    For Die
    Wd.
    Lg.
    Handle
    Material
    Die Holder
    Material
    Includes
    Each
    5/8"4 7/8"Cast ZincCast ZincOne Set Screw000000000000
    1 7/16"14 11/16"Aluminum
    Cast ZincOne Set Screw000000000000
    1 13/16"22 1/2"Aluminum
    Cast ZincOne Set Screw000000000000
    For Hex and Round Dies
    Image of Product. Front orientation. Die Wrenches. For Hex and Round Dies.
    Image of Attribute. Front orientation. Contains Annotated.
    For Die
    Wd.
    For Die
    OD
    Lg.
    Handle
    Material
    Die Holder
    Material
    Includes
    Each
    1"1"10"Cast ZincCast ZincOne Set Screw0000000000000

    Tap and Die Wrench Kits

    Image of Product. Front orientation. Tap and Die Wrench Kits.
    Switch from internal to external threading with interchangeable tap and die adapters. Use them with the included ratcheting wrench. The attachable sliding T-handle moves from side to side for accessing tight spaces.
    No. of
    Pieces
    Includes
    Tap Sizes Included
    Die Sizes Included
    Container
    Type
    Each
    5Tap Adapter for Tap Sizes No. 4 to No. 12
    Tap Adapter for Tap Sizes 1/4" to 1/2"
    Die Adapter for 1" Wide Hex Dies
    Ratcheting Wrench with Attachable Sliding T-Handle
    ____Plastic Case0000000000000
    42Die Spacer Adapter
    Metric Feeler Gauge
    17 Taps
    17 Dies
    4 mm Hex L-Key
    Tap Adapter for Tap Sizes No. 4 to No. 12
    Tap Adapter for Tap Sizes 1/4" to 1/2"
    Die Adapter for 1" Wide Hex Dies
    Ratcheting Wrench with Attachable Sliding T-Handle
    1/8"-28, M3 × 0.50 mm, M3 × 0.60 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm1/8"-28, M3 × 0.50 mm, M3 × 0.60 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mmPlastic Case0000000000000
    77Die Spacer Adapter
    Metric Feeler Gauge
    34 Taps
    34 Dies
    4 mm Hex L-Key
    Inch Feeler Gauge
    Tap Adapter for Tap Sizes No. 4 to No. 12
    Tap Adapter for Tap Sizes 1/4" to 1/2"
    Die Adapter for 1" Wide Hex Dies
    Ratcheting Wrench with Attachable Sliding T-Handle
    4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, M3 × 0.5 mm, M3 × 0.60 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.0 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, M3 × 0.50 mm, M3 × 0.60 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mmPlastic Case0000000000000
    1145 Extractors
    Metric Feeler Gauge
    48 Taps
    48 Dies
    4 mm Hex L-Key
    Inch Feeler Gauge
    Tap Adapter for Tap Sizes No. 4 to No. 12
    Tap Adapter for Tap Sizes 1/4" to 1/2"
    Locking Tap Adapter for Tap Sizes 9/16" to 3/4"
    Die Adapter for 1" Wide Hex Dies
    Die Adapter for 1 7/16" Wide Hex Dies
    3/8 Drive Female Extension Adapter
    3/8 Drive Male Extension Adapter
    (2) Ratcheting Wrench with Attachable Sliding T-Handle
    4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-18, 1/4"-19, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, M3 × 0.5 mm, M3 × 0.60 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.0 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm, M14 × 1.25 mm, M14 × 2.00 mm, M16 × 1.50 mm, M16 × 2.00 mm, M18 × 1.50 mm, M18 × 2.50 mm4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-18, 1/4"-19, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, M3 × 0.50 mm, M3 × 0.60 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm, M14 × 1.25 mm, M14 × 2.00 mm, M16 × 1.50 mm, M16 × 2.00 mm, M18 × 1.50 mm, M18 × 2.50 mmPlastic Case0000000000000
    back to top