These pans have ¼” dia. perforations on the sides and bottom to allow drainage and air flow. They meet NSF/ANSI 2 sanitary design standards for food equipment.

Magnetized to hold metal tools and parts, these trays can be used right-side up, sideways, and even upside down.

Stainless steel trays have rubber-covered magnets to protect surfaces from scratches.

For technical drawings and 3-D models, click on a part number.

These are the most corrosion-resistant tray systems we offer for routing cable and hose in configurations such as curves, slopes, and tees. Cut, bend, and connect the wire mesh trays. They are a lightweight option for organizing bundles of cable and hose while keeping them accessible.

Use bolt cutters to cut trays to the size you need. The maximum capacity is based on mounting brackets spaced every 6 feet.

Straight connectors join two trays in a straight line.

Clamp connectors can be used to join two trays after you have bent them. You can also use these connectors to join trays in a straight line.

Drop outs relieve stress on the cable and hose as it exits the tray.Hanging clips attach to the sides of a tray to suspend it from 1/4", 3/8", or 1/2" threaded rod. Threaded rod, two nuts, and two washers are required for each clip and are not included.

For technical drawings and 3-D models, click on a part number.

Protect against corrosion with these stainless steel cabinets.

The 15” wide cabinets have a built-in maintenance cart to move large items, such as motors, pumps, and tanks, along with your tools and other small parts. Two additional center wheels let you spin the cabinets 360°, making them easy to get in and out of tight spaces, such as elevators and wire enclosures.

For technical drawings and 3-D models, click on a part number.