We will reply to your message within an hour.
Convert from one square drive size to another.
Push the square drive through the adapter to change size.
These adapters are insulated to protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900.
Attach your square-drive sockets to drills, powered screwdrivers, and other tools that accept a hex shank.
Turn sockets with a bit screwdriver.
Insulated to protect against accidental contact with live electrical circuits, these adapters are tested to 1,000 volts to meet IEC 60900 and ASTM F1505 standards.
Attach a socket to one of these adapters—the base has a hex shape so you can use a ratchet wrench along with an open-end or box wrench for additional leverage.
Extend your socket's reach.
Safely lengthen the reach of your socket while working near flammable vapors and combustible residue.
Safely extend your reach in areas where you could accidentally come into contact with live circuits.
Keep common extension lengths on hand to reach a variety of spots—just attach them to your socket.
Reach a variety of spots with the confidence that your extension won’t disengage.
Bend these extensions to reach inconveniently located fasteners. These sets include multiple extension lengths, so you can find the right length to reach around obstructions.
Tighten and loosen fasteners in hard-to-reach spots with a variety of extensions that lengthen the reach of your socket.
Bend these socket extensions around obstructions to turn hard-to-reach fasteners.
The male ends of these extensions are rounded, so they can pivot to use your tool at an angle.
Lock your socket into these extensions to prevent accidental disengagement.
Convert your socket into a flex socket to access fasteners from an angle.
Convert your socket into a flex socket without worrying about the adapter falling off.
Set a desired torque within the range.
Already set to a specific torque limit, these adapters audibly click and release when you reach that setting to prevent overtightening.
A digital display shows how torque measurements change as you turn the wrench. Set the desired torque and angle—lights and an audible alarm indicate when target has been reached or exceeded.
Lock the adapter on your tool and the socket to the adapter to prevent accidental disengagement.
Fit these adapters between a wrench and socket to enable finger tightening.
Change a standard wrench handle into a ratcheting wrench.
Attach one of these adapters to a ratcheting box wrench to convert it to a ratcheting socket wrench.
A magnet holds the socket, making changes quicker.
Attach your impact square-drive sockets to power drills, impact drivers, and other tools that accept a hex shank.
Convert your impact socket into a flex socket to access fasteners from an angle.
Attach to your socket for a longer reach.
Lock your socket into the extension to prevent accidental disengagement.
Attach one of these extensions to your impact socket to turn fasteners in hard-to-reach spaces.
Pull the collar to quickly attach and remove sockets.
Reach a variety of spots by keeping common extension lengths on hand.
Also known as positive-locking extensions, these extensions hold sockets place with a ball that only retracts when you pull the collar down. Designed to prevent accidental detachment, they lock to your socket more securely than other extensions.
Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.
Attach your square-drive impact socket to a spline-drive impact wrench.
Use the pulsing of an air hammer along with the controlled turning of a hand wrench to release stuck fasteners without breaking them.
These adapters, which convert from one square drive size to another, were designed to tolerate continuous use with impact tools in high-volume production and assembly.
First developed for aerospace and automotive assembly processes, these extensions will stand up to your high-volume production and assembly lines.
Use these adapters to connect sockets to impact wrenches and other power tools—they’re designed to tolerate continuous use in high-volume production and assembly.
Bend these extensions around obstructions to access hard-to-reach fasteners.
Carry fewer impact sockets—these five reversible impact sockets turn 10 fastener sizes. Flip the socket around to turn a different size.
The hex shape grips hex fasteners and prevents rounding. These sockets are made to withstand the high torque and force of impact tools.
Use one socket to switch between two fastener sizes.
Convert your standard 6-point sockets into hex bit sockets with these bits.
Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.
Suitable for occasional maintenance work, these sets are imported.
Pair the sockets in these sets with the bolt-through ratchet wrench to reach nuts at the bottom of a long threaded rod or bolt.
Shaped and sized for compatibility with wheel bearing locknuts on trucks and trailers, the sockets in these sets make it easy to install and remove locknuts.
A ratchet mechanism allows you to turn fasteners without removing and repositioning the wrench.
The handle is covered in rubber for a comfortable grip.
No need to pull the socket off the tool—push a button to release.
Pair these wrenches with a bolt-through socket to reach nuts at the bottom of a long threaded rod or bolt which can pass through the head of the wrench.
Also known as rotator ratchets, these wrenches let you rotate the grip to tighten a socket. They're useful when you don't have the space to swing the handle side to side.
The shaft on these wrenches extends and locks.
A gasket seals in permanent lubrication and keeps out dirt, dust, and moisture.
When the ratchet head becomes worn or damaged, change it out for a new one.
Also known as a construction or spud handle, wrenches use the pointed end to align bolt holes.
Made of aluminum-bronze, these wrenches satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.
Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.
The 20° offset head provides clearance when reaching over obstructions.
Pivot the head to access fasteners in tight spots.
Turn sockets in the most confined spaces.
Rather than teeth, these wrenches use a series of rollers to engage the ratchet, enabling work in the tightest of spaces. Also known as silent ratchets, they don't make the traditional click sound when turned.
Use these versatile sets to turn sockets in a variety of hard-to-reach spots.
Use these tools for general shop applications.
Built to last, these wrenches have an enclosed steel head that seals lubrication in and dirt, dust, and moisture out to protect the ratchet mechanism. Since they’re air powered, these wrenches turn fasteners more quickly than handheld wrenches.
Switch out worn or damaged bits instead of replacing your entire bit socket.
Lock your bit into the adapter to prevent accidental disengagement. These adapters attach to square-drive tools.
Attach these adapters to square-drive tools.
Adapt your USB port to connect to a variety of other devices.
Power up mobile devices and other electronics.
Connect devices such as computers, printers, and mobile devices.
No drilling or fasteners needed—a screw-in cover plate makes it easy to mount these chargers for powering up phones, tablets, speakers, cameras, and other small devices.
Use foreign devices in American outlets and American devices in foreign outlets.
Power devices that have a straight-blade connection from a vehicle outlet.
Change a turn-lock to a straight-blade connection, or a straight-blade to a turn-lock connection.
Minimize the risk of electric shock by adding ground fault protection to a standard outlet.
Add grounding or surge suppression protection.
Connect multiple devices from a single outlet.
Turn a single outlet into five outlets with ground fault protection to minimize the risk of electric shock.
Automatically power heating and cooling devices on and off when temperatures rise or drop.
Made with industry standard barrel-style ends, these connectors carry DC power between electronic devices and power supplies.
Join M8 connections to M12 connections.
To save space and reduce the number of cords in industrial automation setups, these splitters join two devices with M12 connectors to a single cord, distribution block, or I/O module with M12 connectors.
Join two devices with M8 connectors to a single cord, distribution block, or I/O module with M12 connectors to save space and reduce the number of cords in industrial automation setups. Often used with sensors and switches, these splitters send or receive two signals through one connection.
Simplify wiring and reduce the number of cords in your automation setup.
Modify your M12 or mini connection to match cords and I/O modules in your system.
Reduce the number of cords needed to send and receive signals where space is tight.
Connect different pole configurations to join sensors, switches, and other devices to cords, distribution blocks, and I/O modules.
Power robotic arms and other high-amperage machines in motor controls, conveyors, and sorting and packaging systems from your main M35 power line.
Extend an audio connection by plugging a cord into each end of these adapters.
Connect two stereo cords through a panel with these adapters.
Use these extenders when bulbs are too short to fit into deep or recessed fixtures.
Convert a fixture that uses candelabra-base bulbs to accept medium-base bulbs with these adapters.