We will reply to your message within an hour.
More
Also known as Oilite® bearings.
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.
With a flexible layer of rubber sandwiched between an oil-embedded bronze bearing and rigid metal shell, these bearings reduce wear and machinery noise.
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
To ensure compatibility with other parts, the materials and dimensions of these bearings meet strict military standards. Also known as Oilite® bearings, they are porous bronze, so startup friction causes them to release a thin layer of oil on the bearing’s surface.
The oil in these bearings is suitable for incidental contact with food.
With extra iron and filled with oil containing slippery PTFE, these bearings support heavy loads that frequently start and stop along shafts.
Unlike other sleeve bearings, these do not need to be fully inserted into a housing. Their unique shape creates a permanent, secure hold in thin panels.
Embedded with oil that is safe for incidental contact with food, these bearings are suitable for use in high-load applications such as bottling and filling lines in food processing plants. They are also known as Super Oilite® bearings.
Graphite provides a layer of dry lubrication that can operate in high-temperature environments.
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They’re flanged, so they handle loads both parallel and perpendicular to the shaft. They’re also known as Oilite® bearings.
With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications.
The materials and dimensions of these bearings meet strict military standards to ensure compatibility with other parts. Also known as Oilite® bearings, they are porous bronze, so startup friction causes them to release a thin layer of oil on the bearing’s surface.
These bearings come with a traceable lot number and material test report. They are also known as Oilite® bearings.
Support heavy loads that are often found in bottling and filling lines in food plants—these bearings contain extra iron and FDA-compliant oil. They’re flanged, so they handle loads both parallel and perpendicular to the shaft.
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
Made of 863 iron-copper and embedded with NSF registered H1 oil, these bearings can tackle high-load applications in food plants, such as bottling and filling lines.
Handle heavy loads that frequently start and stop along shafts—these bearings contain extra iron and slippery PTFE lubricant. They’re thrust bearings, which means they support loads parallel to the shaft.
The oil in these bearings is NSF registered H1 and FDA compliant for incidental contact with food.
Powdered bronze is pressed and then impregnated with SAE 30 oil to make this material self-lubricating.
An excellent alternative to oil-filled bronze, graphite-filled bronze provides dry lubrication in temperatures as high as 700° F.
Frequently called manganese brass, 863 bronze can handle heavy loads and high speeds when properly lubricated. These bars are a higher-strength alternative to tight-tolerance 954 bearing bronze bars.
Frequently called manganese brass, 863 bronze can handle heavy loads and high speeds when properly lubricated.