The hex shape achieves the best possible grip on hex fasteners to prevent rounding their points.

The short bit on these sockets fits in spaces where height clearance is limited.

The short Phillips bit on these sockets fits in spaces that screwdrivers can’t and where height clearance is limited.

The opening shape makes more contact with fasteners for a better grip than standard open-end sockets. Also known as flare-nut or line wrench sockets, they're often used with flared tube fittings and fuel and hydraulic lines.

Pivot the head to access fasteners from an angle.

Turn sockets with a bit screwdriver.

Push the square drive through the adapter to change size.

These adapters are insulated to protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900.

Adapters are set to a specific torque and cannot be adjusted.

Lock the adapter on your tool and the socket to the adapter to prevent accidental disengagement.

Convert from one square drive size to another.

Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.

Convert from one square drive size to another.

Convert from one square drive size to another.

Turn nuts on bolts and threaded rods, which can pass through the short end of the wrench. For additional leverage, slip a bar through the short end to create a T-handle.

These wrenches have one pivoting socket end and one open end.

When the set torque is reached, these wrenches slip to disengage and stop overtightening.

Also known as bung wrenches, these tools are used to install and remove screw-in drum plugs.