Planks, Guardrails, and Toeboards
Create catwalks, bridges, gangways, and mezzanines by combining these planks, guardrails, and toeboards. They also work well between trestles, ladder jacks, and ladder scaffolding supports. Rungs on the underside are for use as hand grips.
Planks have a slip-resistant surface for sure footing. The vinyl end caps protect against sharp edges and act as hand grips.
Guardrails mount to either side of the plank with the upper rails 38" to 42" above the plank surface.
Toeboards mount to either side of the plank. They clamp to guardrail posts.
Note: Planks, guardrails, and toeboards meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.
For technical drawings and 3-D models, click on a part number.
| Lg., ft. | Ht. | Wt., lbs. | Material | Plank Tread | Mounting Hardware Included | Assembled or Unassembled | Specifications Met | Each | |
500-lb. Capacity | |||||||||
|---|---|---|---|---|---|---|---|---|---|
14" Wd. | |||||||||
| 8 | 4" | 27 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 0000000 |
| 12 | 4" | 40 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 16 | 5" | 58 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 20 | 6" | 85 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
20" Wd. | |||||||||
| 8 | 4" | 33 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 12 | 4" | 48 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 16 | 5" | 70 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 20 | 6" | 102 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 24 | 6" | 121 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 00000000 |
24" Wd. | |||||||||
| 8 | 4" | 38 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 12 | 4" | 56 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 16 | 5" | 81 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 20 | 6" | 115 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 00000000 |
| 24 | 6" | 138 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 00000000 |
28" Wd. | |||||||||
| 8 | 4" | 41 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 12 | 4" | 60 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 20 | 6" | 124 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 00000000 |
| 24 | 6" | 147 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 00000000 |
750-lb. Capacity | |||||||||
28" Wd. | |||||||||
| 12 | 4" | 71 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 16 | 5" | 103 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 00000000 |
| 20 | 5" | 128 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 00000000 |
| 24 | 6" | 161 | Aluminum | Smooth | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 00000000 |
| For Plank Lg., ft. | Material | Mounting Hardware Included | Assembled or Unassembled | Includes | Specifications Met | Each | |
| 8 | Aluminum | Yes | Unassembled | Midrail, Vertical Posts | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451 | 0000000 | 0000000 |
| 12 | Aluminum | Yes | Unassembled | Midrail, Vertical Posts | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451 | 0000000 | 000000 |
| 16 | Aluminum | Yes | Unassembled | Midrail, Vertical Posts | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451 | 0000000 | 000000 |
| 20 | Aluminum | Yes | Unassembled | Midrail, Vertical Posts | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451 | 0000000 | 000000 |
| 24 | Aluminum | Yes | Unassembled | Midrail, Vertical Posts | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451 | 0000000 | 000000 |
| For Plank Lg., ft. | Toeboard Ht. | Material | Mounting Hardware Included | Assembled or Unassembled | Specifications Met | Each | |
| 8 | 3 1/2" | Aluminum | No | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451 | 0000000 | 000000 |
| 12 | 3 1/2" | Aluminum | No | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451 | 0000000 | 00000 |
| 16 | 3 1/2" | Aluminum | No | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451 | 0000000 | 000000 |
| 20 | 3 1/2" | Aluminum | No | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451 | 0000000 | 000000 |
| 24 | 3 1/2" | Aluminum | No | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451 | 0000000 | 000000 |
| For Plank Wd. | Toeboard Ht. | Material | Mounting Hardware Included | Assembled or Unassembled | Specifications Met | Each | |
| 20", 24", 28" | 3 1/2" | Aluminum | Yes | Unassembled | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451 | 0000000 | 0000000 |
Scaffold Planks for Harsh Environments
Aluminum is a good choice for damp areas and outdoor use. Hooks with a 2" opening at each end secure planks to end frames. Rungs on the underside are for use as hand grips. Planks have a perforated surface for slip resistance and to reduce debris buildup. End hooks are offset to allow for continuous planking of large scaffolds.
Note: Length is measured from center-to-center of end hooks.
Note: Planks meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.
Rail | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Wd. | Ht. | Cap., lbs. | Plank Tread | Ht. | Material | Wt., lbs. | Assembled or Unassembled | Features | Specifications Met | Each | |
Aluminum | ||||||||||||
| 7 | 19 1/16" | 3" | 250 | Perforated | 3" | Aluminum | 25 | Unassembled | 2" End Hooks | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 0000000 |
| 8 | 19 1/16" | 4" | 250 | Perforated | 4" | Aluminum | 34 | Unassembled | 2" End Hooks | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 10 | 19 1/16" | 4" | 250 | Perforated | 4" | Aluminum | 43 | Unassembled | 2" End Hooks | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
Scaffold Planks
Hooks with a 2" opening at each end secure planks to end frames. Rungs on the underside are for use as hand grips. Plywood is 1/2" thick.
Note: Length is measured from center-to-center of end hooks.
Note: Planks meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.
Rail | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Wd. | Ht. | Cap., lbs. | Plank Tread | Ht. | Material | Wt., lbs. | Assembled or Unassembled | Features | Specifications Met | Each | |
Plywood | ||||||||||||
| 7 | 19 1/16" | 3 1/2" | 250 | Smooth | 3 1/2" | Aluminum | 27 | Unassembled | 2" End Hooks | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 0000000 |
| 8 | 19 1/16" | 4 1/2" | 250 | Smooth | 4 1/2" | Aluminum | 38 | Unassembled | 2" End Hooks | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
| 10 | 19 1/16" | 4 1/2" | 250 | Smooth | 4 1/2" | Aluminum | 47 | Unassembled | 2" End Hooks | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.451, UL 1322 | 0000000 | 000000 |
Extension Planks
For use with ladder jacks, trestle ladders, and walkways, adjust the length of these planks in 12" increments. They have a ribbed surface for slip resistance. Planks have a spring-set lock to secure the extended position. Automatic stops prevent overextending, and end flanges maintain rigidity.
Note: Planks meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.
| Lg., ft. | Wd. | Ht. | Cap., lbs. | Plank Tread | Wt., lbs. | Assembled or Unassembled | Features | Specifications Met | Each | |
Aluminum | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 6-9 | 14" | 2" | 250 | Ribbed | 31 | Unassembled | Spring-Set Lock | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.1053, UL 1322 | 0000000 | 0000000 |
| 8-13 | 14" | 2" | 250 | Ribbed | 41 | Unassembled | Spring-Set Lock | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.1053, UL 1322 | 0000000 | 000000 |
| 10-17 | 14" | 2" | 250 | Ribbed | 57 | Unassembled | Spring-Set Lock | ANSI/ASSP A10.8, OSHA Compliant 29 CFR 1926.1053, UL 1322 | 0000000 | 000000 |
Ladder Plank Supports
Also known as ladder jacks, these supports hold a plank between two straight or extension ladders to create a scaffold. Supports fit round or D-rungs, attaching to three rungs on each ladder. Use the adjustment notches to set the angle of the plank. Capacity is 500 lbs. per pair.
Note: Ladders and planks must have a minimum 250-lb. capacity.
| For Max. Plank Wd. | For Ladder Type | For Step Shape | Features | Pair | |
| 18" | Extension, Straight | Round, Flat | Eight Angle Adjustment Notches | 0000000 | 0000000 |
Uneven Surface Scaffolds
Even if your surface isn't level, your scaffold can be—the end frames on these scaffolds adjust independently so you can set each side at a different height. You can change the plank height in 4" increments; use the spring-loaded pins to lock it in place.
Guardrail/toeboard kits are required by OSHA when add-on height sections are used.
Note: Scaffolds meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.
For technical drawings and 3-D models, click on a part number.
Wheel | Stem | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | Dia. | Lg. | Wheel/Tread Material | Caster Type | Each | |
| 5" | 1 1/8" | 6 1/4" | 150 | 5/8" | 2" | Rubber | Swivel with Brake | 0000000 | 000000 |