We will reply to your message within an hour.
These face shields meet ANSI/ISEA impact standards when worn with safety glasses or goggles.
The snug-fitting goggles attached to this face shield provide added protection from dust and liquids.
The lens on these face shields is coated for an added level of protection against most chemicals.
The scratch-resistant coating on these face shields extends the lens life.
Protect your eyes and face from particles and light debris in food industry environments.
For use in light duty applications that don’t require much impact resistance, these plastic shields protect your face from dust, liquids, sneeze and cough particles, and other debris.
The coating on these face shields reflects radiant heat to keep your face cooler.
Eyeglass frames make these face shields easy and comfortable to wear for extended periods of time, even in hot conditions.
Attach these shields to the brim of cap-style or full-brim hard hats to provide full-face protection.
Provide protection from low-level arc flash hazards when a full hood is not necessary.
These hoods meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 4.
Protect your head and neck from extreme heat.
Providing greater safety while welding than face shields, these helmets have an outer filter lens cover for protection from scratches and weld spatter.
Also known as pancake welding helmets, these helmets have a flat face so you can get close to your welds. The instant you start to weld, the lens darkens.
Protect your eyes the moment you start welding—four sensors detect the light and automatically darken the lens.
Protect your eyes the moment you start welding with a helmet that senses light and automatically darkens. You can change the shade of the lens without removing these helmets by using a Bluetooth-connected app.
Hold these lightweight face shields up to your face for quick inspection of welding activity.
The lens on these shields filters out harmful light to protect your eyes during traditional and laser welding. They meet ANSI Z136.1 specifications for laser safety.
For full-face protection while welding, select one of these shields.
For protection from arc flash hazards, these kits include several of the safety items you may need. All items meet NFPA 70E for protection against flames and electrical arc flashes.
Shield your face and neck from flame and electrical hazards while working in the cold.
Keep cool while staying shielded from flame and electrical hazards. These gaiters meet NFPA 70E standards for protection against flames and arc flashes.
These face masks meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2.
Prevent dust, microbes and other pollutants from contaminating a clean room. When laundered to clean room standards, these hoods can be reused up to 100 times.
Use these kits for head-to-toe protection from chemical spills and splashes.
Keep your head and neck warm.
Shield your torso, face, and hands from extremely cold materials, such as liquid nitrogen and dry ice.
Protect the back of your head and neck from sparks with these flame-resistant welding caps.
These hoods protect against paint and dust.
Full-face coverage shields eyes from liquid splashes and irritating vapors. Replace the cartridge and/or filter when breathing through these respirators becomes difficult.
Replace the filter on your respirator when breathing becomes difficult.
Good for use around abrasive blasters and painters, these respirators are made of high-density materials that protect against rough airborne particles.
Divert compressed air from a single line to two respirators.
Made of chemical-resistant Tychem 2000 (formerly known as Tyvek QC), these hood respirators have both an outer bib and an inner bib that tucks into your clothing for splash protection.
Keep clean, breathable air flowing from a respirator air supply hose to your hood or helmet by replacing worn or damaged breathing tubes.
Replace your respirator hood or swap it out for a new style.
When connected to an air pump, respirators provide a continuous supply of clean air. They have a chemical-resistant Tychem 2000 hood that protects against light liquid splashes.
Good for use around abrasive blasters and paint sprayers, these respirators are made of high-density materials that protect against rough airborne particles.
The portable pump on these respirators provides a continuous supply of clean air for one person.
Replace the filter in your pump to supply clean air to your respirator.
Block out smoke or gas in seconds during emergencies.
These masks are lightweight and easy to breathe through.
Slip on this mask for protection from dust irritation.
Make it easier to move and more comfortable to wear your respirator.
Replace the cartridge on your powered respirator to keep air free from gases and vapors.
The most mobile respirators in our offering—these powered respirators allow a wider range of motion than supplied-air respirators.
An alternative to disposable face masks, these protective masks can be washed and reused multiple times.
Made of low-linting fabric, these masks won’t shed fabric particles that could contaminate your clean room. They come double bagged and are suitable for use in clean rooms rated to both Federal Standard and ISO classes.
Designed with a battery that connects securely to the blower, these respirators prevent sparks that could ignite flammable or combustible particles in the air.
Replace the blower when it’s worn or damaged to keep air flowing through your powered respirator.
Remove at least 95% of particles from the air your blower sucks in, so your respirator has clean air.
Replace worn or damaged breathing tubes—these tubes deliver clean, breathable air from the air pump to your hood or helmet.
These hard hats give all-in-one head, face, and ear protection. Lift the face shield and earmuffs when not in use.
Shield your eyes from dust and spray and protect your head from falling objects. These hard hats have a visor that slides inside their hard shell to prevent scratches when you’re not working.
Protect your head from minor bumps and scrapes. Attach a lens to protect against dust and spray.
Soak these bandanas before wearing them—they’ll cool you off as the water evaporates.