Filter by
DFARS Compliance
About Structural Adhesives
More
Cement for Plastic
Form strong bonds on most plastics.
Cement that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).
Container | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size | Type | Begins to Harden | Reaches Full Strength | Consistency | Viscosity, cP | Temp. Range | Color | For Joining | Cannot Be Sold To | Each | |
SciGrip Cement | ||||||||||||
| 16 | 1.5 fl. oz. | Tube | 5 min. | 21 days | Thin Liquid | 800 | Not Rated | Clear | Plastic, Rubber | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 0000000 | 00000 |
| 3 | 16 fl. oz. | Can | 60 sec. | 7 days | Thin Liquid | Not Rated | Not Rated | Clear | Plastic, Rubber | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 0000000 | 00000 |
Rubber Cement
Rubber cement allows repositioning until fully dried. Use it on paper and cardboard.
Container | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Begins to Harden | Reaches Full Strength | Consistency | Viscosity | Max. Temp., °F | Color | For Joining | Each | |
| 8 fl. oz. | Brush-Top Bottle | 5 sec. | 12 hrs. | Thin Liquid | Not Rated | 150° | Clear | Cardboard | 00000000 | 00000 |
Contact Adhesives
Apply these adhesives on two surfaces, air dry, and then bring together to bond.
4693 works on hard-to-bond plastics, such as polypropylene and polyethylene.
Black adhesive works especially well on foam insulation.
Adhesives that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).
Container | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size | Type | Begins to Harden | Reaches Full Strength | Shear Strength, lbs./sq. in. | Consistency | Viscosity, cP | Temp. Range, °F | Color | For Joining | Cannot Be Sold To | Each | |
3M Adhesives | |||||||||||||
| 1099 | 32 fl. oz. | Can | 40 min. | 72 hrs. | 3,405 | Thick Liquid | 3,000 | -10° to 230° | Beige | Fabric, Foam, Plastic, Rubber | __ | 00000000 | 000000 |
| 1099 | 1 gal. | Can | 40 min. | 72 hrs. | 3,405 | Thick Liquid | 3,000 | -10° to 230° | Beige | Fabric, Foam, Plastic, Rubber | __ | 00000000 | 000000 |
| 1357 | 1 gal. | Can | 10 min. | 24 hrs. | 158 | Thin Liquid | 325 | -30° to 220° | Light Yellow | Ceramic, Glass, Masonry, Metal, Wood | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA; CT; DC; DE; MA; MD; ME; NH; NJ; NY; PA; RI; UT; Northern VA; VT | 00000000 | 000000 |
| 2262 | 32 fl. oz. | Can | 10 min. | 24 hrs. | Not Rated | Thin Liquid | 525 | -10° to 230° | Clear | Metal, Plastic, Rubber | __ | 00000000 | 000000 |
| 4475 | 32 fl. oz. | Can | 10 min. | 72 hrs. | Not Rated | Thick Liquid | 8,500 | -10° to 230° | Clear | Ceramic, Fabric, Glass, Plastic, Rubber | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA; CT; DC; DE; MA; MD; ME; NJ; NY; PA; RI; UT; Northern VA; VT | 00000000 | 000000 |
| 4693 | 32 fl. oz. | Can | 60 min. | 72 hrs. | Not Rated | Thin Liquid | 225 | -10° to 230° | Amber | Plastic, Rubber | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA; CT; DC; DE; MA; MD; ME; NJ; NY; PA; RI; UT; Northern VA; VT | 00000000 | 00000 |
| 4693 | 1 gal. | Can | 60 min. | 72 hrs. | Not Rated | Thin Liquid | 225 | -10° to 230° | Amber | Plastic, Rubber | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA; CT; DC; DE; MA; MD; ME; NJ; NY; PA; RI; UT; Northern VA; VT | 00000000 | 000000 |
Pliobond Adhesives | |||||||||||||
| 20 | 1 fl. oz. | Tube | 3 min. | 14 days | 1,200 | Thin Liquid | 800 | -40° to 370° | Beige | Ceramic, Glass, Metal, Plastic, Rubber | __ | 0000000 | 0000 |
| 25 | 8 fl. oz. | Brush-Top Can | 3 min. | 14 days | 1,200 | Thin Liquid | 800 | -40° to 370° | Beige | Ceramic, Metal, Plastic, Rubber | __ | 0000000 | 00000 |
| 25 | 16 fl. oz. | Can | 3 min. | 14 days | 1,200 | Thin Liquid | 800 | -40° to 370° | Beige | Ceramic, Metal, Plastic, Rubber | __ | 0000000 | 00000 |
| 25 | 32 fl. oz. | Can | 3 min. | 14 days | 1,200 | Thin Liquid | 800 | -40° to 370° | Beige | Ceramic, Metal, Plastic, Rubber | __ | 000000 | 00000 |
| 25 | 1 gal. | Can | 3 min. | 14 days | 1,200 | Thin Liquid | 800 | -40° to 370° | Beige | Ceramic, Metal, Plastic, Rubber | __ | 000000 | 000000 |
| 35 | 8 fl. oz. | Brush-Top Can | 3 min. | 14 days | 1,200 | Thick Liquid | 6,500 | -40° to 370° | Beige | Cardboard, Fabric, Foam, Wood | __ | 0000000 | 00000 |
| 35 | 16 fl. oz. | Can | 3 min. | 14 days | 1,200 | Thick Liquid | 6,500 | -40° to 370° | Beige | Cardboard, Fabric, Foam, Wood | __ | 0000000 | 00000 |
| 35 | 32 fl. oz. | Can | 3 min. | 14 days | 1,200 | Thick Liquid | 6,500 | -40° to 370° | Beige | Cardboard, Fabric, Foam, Wood | __ | 0000000 | 00000 |
| 35 | 1 gal. | Can | 3 min. | 14 days | 1,200 | Thick Liquid | 6,500 | -40° to 370° | Beige | Cardboard, Fabric, Foam, Wood | __ | 0000000 | 000000 |
Weldwood Adhesives | |||||||||||||
| __ | 3 fl. oz. | Bottle | 15 min. | 72 hrs. | Not Rated | Thick Liquid | Not Rated | -40° to 150° | Beige | Composites, Plastic, Rubber, Wood | __ | 0000000 | 0000 |
| __ | 16 fl. oz. | Can | 15 min. | 72 hrs. | Not Rated | Thick Liquid | Not Rated | -40° to 180° | Beige | Composites, Plastic, Rubber, Wood | __ | 0000000 | 00000 |
Adhesives | |||||||||||||
| __ | 4 fl. oz. | Brush-Top Can | 2 min. | 24 hrs. | Not Rated | Thin Liquid | 1,200 | -30° to 150° | Clear | Copper, Fabric, Foam, Rubber, Steel, Wood | __ | 000000 | 00000 |
| __ | 8 fl. oz. | Brush-Top Can | 2 min. | 24 hrs. | Not Rated | Thin Liquid | 1,200 | -30° to 150° | Clear | Copper, Fabric, Foam, Rubber, Steel, Wood | __ | 000000 | 00000 |
| __ | 16 fl. oz. | Brush-Top Can | 2 min. | 24 hrs. | Not Rated | Thin Liquid | 1,200 | -30° to 150° | Clear | Copper, Fabric, Foam, Rubber, Steel, Wood | __ | 000000 | 00000 |
| __ | 16 fl. oz. | Brush-Top Can | 3 min. | 36 hrs. | Not Rated | Thick Liquid | Not Rated | -40° to 250° | Black | Foam, Masonry, Metal, Plastic, Rubber | __ | 00000000 | 00000 |
| __ | 32 fl. oz. | Brush-Top Can | 2 min. | 24 hrs. | Not Rated | Thin Liquid | 1,200 | -30° to 150° | Clear | Copper, Fabric, Foam, Rubber, Steel, Wood | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 000000 | 00000 |
| __ | 1 gal. | Can | 2 min. | 24 hrs. | Not Rated | Thin Liquid | 1,200 | -30° to 150° | Clear | Copper, Fabric, Foam, Rubber, Steel, Wood | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 000000 | 000000 |
High-Temperature Contact Adhesives
These adhesives resist temperatures up to 500° F, as well as chemicals, fuels, grease, and water. Apply them to both surfaces, air dry, and then bring together to bond. Heat to 300° F to reach full strength. They cannot be sold to the regions listed because these adhesives exceed local regulatory limits on VOCs (volatile organic compounds).
Container | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size | Type | Begins to Harden | Reaches Full Strength | Heating Requirements to Reach Full Strength | Shear Strength, lbs./sq. in. | Cure Type | Consistency | Viscosity, cP | Temp. Range, °F | Color | For Joining | Cannot Be Sold To | Each | |
Pliobond Adhesives | |||||||||||||||
| HT-30 | 32 oz. | Can | 3 min. | 30 min. | 30 min. @ 300° F | 1,450 | Heat, Room Temperature | Thick Liquid | 6,500 | -40° to 500° | Beige | Ceramic, Metal | CT, DC, DE, Los Angeles County, CA, MA, MD, ME, NJ, Northern VA, NY, Orange County, CA, PA, RI, Riverside County, CA, San Bernardino County, CA, UT, VT | 000000 | 000000 |
| HT-30 | 1 gal. | Can | 3 min. | 30 min. | 30 min. @ 300° F | 1,450 | Heat, Room Temperature | Thick Liquid | 6,500 | -40° to 500° | Beige | Ceramic, Metal | CT, DC, DE, Los Angeles County, CA, MA, MD, ME, NJ, Northern VA, NY, Orange County, CA, PA, RI, Riverside County, CA, San Bernardino County, CA, UT, VT | 000000 | 000000 |
Nonflammable Contact Adhesives
Bond porous materials with these low-odor, nonflammable adhesives. Apply to both surfaces, air dry, and then bring together to bond.
Container | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Begins to Harden | Reaches Full Strength | Shear Strength | Consistency | Viscosity | Temp. Range, °F | Color | For Joining | Each | |
Weldwood Adhesives | |||||||||||
| 32 fl. oz. | Can | 30 min. | 72 hrs. | Not Rated | Thick Liquid | Not Rated | -40° to 180° | Amber | Cardboard, Composites, Fabric, Wood | 0000000 | 000000 |
| 1 gal. | Can | 30 min. | 72 hrs. | Not Rated | Thick Liquid | Not Rated | -40° to 180° | Amber | Cardboard, Composites, Fabric, Wood | 0000000 | 00000 |
Construction Adhesives for Stair Treads
Install treads on concrete and wood stairs with this strong, water-resistant adhesive.
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size, gal. | Type | Approximate Coverage | Begins to Harden | Reaches Full Strength | Shear | Peel | Consistency | Temp. Range, °F | Color | For Use Outdoors | For Joining | Each | |
| 1 | Pail | 150 sq. ft. @ 1/16" bead | 15 min. | 24 hrs. | Not Rated | Not Rated | Paste | 55° to 85° | White | No | Masonry, Plastic, Rubber, Wood | 00000000 | 000000 |
Construction Adhesives for Flooring
Bond carpeting, vinyl tile, and other floor coverings to subfloors with these water-resistant adhesives.
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Approximate Coverage | Begins to Harden | Reaches Full Strength | Shear | Peel | Consistency | Temp. Range, °F | Color | For Use Outdoors | For Joining | Each | |
| 1 gal. | Pail | 33 sq. ft. @ 1/8" bead | 15 min. | 24 hrs. | Not Rated | Not Rated | Thick Liquid | 65° to 85° | Beige | No | Plastic, Wood | 00000000 | 000000 |
Construction Adhesives for Nosing
Bond and repair nosing and stair treads with this thick two-part epoxy. The size listed is the combined total of the two parts.
Adhesive | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Container | Strength | Dispensing Gun | ||||||||||||||
| Size, fl. oz. | Type | Approximate Coverage | Begins to Harden | Reaches Full Strength | Shear | Peel | Mix Ratio | Consistency | Temp. Range, °F | Color | For Use Outdoors | For Joining | Each | Each | ||
| 13.5 | Cartridge | 50 ft. @ 1/4" dia. bead | 45 min. | 24 hrs. | Not Rated | Not Rated | 1:1 | Paste | 65° to 85° | Beige/Gray | No | Masonry, Plastic, Rubber | 00000000 | 000000 | 0000000 | 0000000 |
Surface Fillers
These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.
Container | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Net Weight | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Pkg. Qty. | Pkg. | |
Loctite® Fixmaster Epoxy | ||||||||||||||
| EA 445 | 0.12 oz. | Mixer Cup | 5 | 12 hrs. | Thick Liquid | 1:1 | 1 sq. in. @ 1/4" | -65° to 180° | Gray | Machine, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood | 10 | 0000000 | 000000 |
| EA 445 | 1 oz. | Mixer Cup | 5 | 12 hrs. | Thick Liquid | 1:1 | 1 sq. in. @ 1/4" | -65° to 180° | Gray | Machine, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood | 10 | 0000000 | 000000 |
| EA 9131 | 0.12 oz. | Mixer Cup | 90 | 24 hrs. | Thick Liquid | 1.5:1 | 1 sq. in. @ 1/4" | -65° to 180° | White | Machine, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood | 10 | 0000000 | 00000 |
Surface Fillers for Vinyl Fabric
Mend rips, tears, and holes on vinyl surfaces, such as awnings and upholstery, with these flexible, waterproof surface fillers. They cannot be sold to regions outside the United States due to product labeling requirements.
Container | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size, fl. oz. | Type | Consistency | Begins to Harden, min. | Reaches Full Strength, hrs. | Temp. Range, °F | Color | For Use Outdoors | For Use On | Cannot Be Sold To | Each | |
| 1 | Tube | Thin Liquid | 30 | 4 | -10° to 200° | Clear | Yes | Vinyl Fabric | Outside United States | 0000000 | 000000 |