Connect your grease gun to the fitting to lubricate. These rod ends don’t come lubricated, so you'll need to lubricate during installation and on an ongoing basis. Made of steel, they generally handle higher loads than stainless steel, aluminum, and nylon rod ends.

For technical drawings and 3-D models, click on a part number.

Connect your grease gun to the fitting to lubricate. Made of steel, these rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends.

For technical drawings and 3-D models, click on a part number.

Seals keep out dirt and an oil-embedded foam insert slowly releases lubricant for a long life. You can remove the insert to add more oil if it starts to run dry. These rod ends have an eyelet and a ball that swivels to support angular misalignment. Made of zinc-plated steel, they have moderate corrosion resistance.

For technical drawings and 3-D models, click on a part number.

Made of stainless steel, these rod ends provide excellent corrosion resistance. A PTFE liner allows smooth ball rotation and eliminates the need for lubrication.

For technical drawings and 3-D models, click on a part number.

Made of stainless steel, these rod ends provide excellent corrosion resistance. A PTFE liner allows smooth ball rotation and eliminates the need for lubrication.

For technical drawings and 3-D models, click on a part number.

Made of impact-resistant nylon, these rod ends withstand corrosion as well as fuels, lyes, and weak acids. They are also 80% lighter than steel rod ends. A self-lubricating nylon ball provides maximum abrasion resistance and eliminates the need for lubrication.

For technical drawings and 3-D models, click on a part number.

Rod ends with Nylon/PTFE insert have a durable, self-sealing insert that reduces wear.

For technical drawings and 3-D models, click on a part number.

These steel rod ends handle loads that are at least 25% higher than other comparably sized rod ends. PTFE allows smooth rotation and eliminates the need for lubrication.

Rod ends with Nylon/PTFE insert have a durable, self-sealing insert that reduces wear.

For technical drawings and 3-D models, click on a part number.

A double row of precision ball bearings allows high speeds and smooth operation. Seals keep lubricant in and dirt out.

Carbon steel rod ends meet DIN dimensional and material standards. They come lubricated, so you won't need to lubricate them at installation. They will require ongoing lubrication.

For technical drawings and 3-D models, click on a part number.

These rod end bolts are good for wet and corrosive environments—for maximum mounting flexibility, cut the fully threaded shaft to whatever length you need. Also known as swing bolts and eyebolts, rod end bolts have no moving parts. They're designed to make pivoting or hinge movements in applications that don't need to compensate for misalignment.

303 and 304 stainless steel rod end bolts won't rust in humid, wet, and washdown environments. They're stronger than brass bolts and nearly as strong as steel. They will rust when exposed to salt water and chemicals, however. DIN 444 rod end bolts meet an international standard for rod end dimensions.

For technical drawings and 3-D models, click on a part number.

For maximum mounting flexibility, cut the fully threaded shaft to whatever length you need. Also known as swing bolts and eyebolts, rod end bolts have no moving parts. They're designed to make pivoting or hinge movements in applications that don't need to compensate for misalignment.

For technical drawings and 3-D models, click on a part number.

These alloy steel rod end bolts have the highest tensile strength of any steel fully threaded rod end bolt we offer. For maximum mounting flexibility, cut the fully threaded shaft to whatever length you need. Also known as swing bolts and eyebolts, rod end bolts have no moving parts. They're designed to make pivoting or hinge movements in applications that don't need to compensate for misalignment.

For technical drawings and 3-D models, click on a part number.

Create pivoting connections in applications that require high shear strength—the partially threaded shank of these rod end bolts withstands more side force than a fully threaded shank. Also known as swing bolts and eyebolts, they are used to create hinges, turnbuckles, and tie downs. Unlike ball joint rod ends, these rod end bolts are made from a single piece of metal, so they wear down more slowly and have a more controlled swing. However, because they do not have a moving ball joint, they do not compensate for angular misalignment.

Made from steel, they are stronger and more wear resistant than stainless steel rod end bolts, but they are not as corrosion resistant. Rod end bolts with a black-oxide finish have a dark, matte coating that keeps the steel from rusting in dry environments.

Rod end bolts that meet DIN 444 adhere to international dimensional standards, ensuring they are compatible with other parts and tools.

For technical drawings and 3-D models, click on a part number.

These black-oxide carbon steel rod end bolts are heat treated for added strength. Also known as jig latch bolts, they mount flush to any flat surface.

For technical drawings and 3-D models, click on a part number.

Made of stainless steel, these rod end bolts are stronger and more corrosion resistant than our standard flat-shoulder rod end bolts. Also known as jig latch bolts, they mount flush to any flat surface.

For technical drawings and 3-D models, click on a part number.

These clevis rod ends offer more corrosion resistance than standard steel clevis rod ends. Also called yoke-end linkages, they support pivoting movement along one axis when threaded onto shafts, rods, valve pistons, and other assemblies.

Stainless steel rod ends offer excellent corrosion resistance.

For technical drawings and 3-D models, click on a part number.

In addition to offering superior chemical resistance, these lightweight, fiber-reinforced nylon rod ends also reduce noise and vibration. Also called yoke-end linkages, they support pivoting movement along one axis when threaded onto shafts, rods, valve pistons, and other assemblies.

For technical drawings and 3-D models, click on a part number.

Make quick adjustments to these rod ends by inserting and releasing the clevis pins without the need to bend them into place. Also called yoke-end linkages, they support pivoting movement along one axis when threaded onto shafts, rods, valve pistons, and other assemblies. All are zinc-plated steel for moderate corrosion resistance.

For technical drawings and 3-D models, click on a part number.