About Installing Blind Rivets
More
About Installing Solid Rivets
More
18-8 Stainless Steel Domed Head Blind Rivets
Made from 18-8 stainless steel, these blind rivets create a strong hold even in wet and damp areas. The domed head gives your project a finished appearance.
Use these blind rivets to fasten hinges, shelves, or other assemblies where you can only access one side. You can also use them to join materials that are difficult to weld or solder. The back of the rivet deforms during installation, so it creates a permanent hold that won't loosen from vibration. It also means you can't overtighten or strip them.
To install these rivets, you’ll need a blind rivet tool (sold separately). Be sure to pick a tool that’s compatible with your rivet’s diameter and material. For more information on installing rivets, see About Installing Blind Rivets.
Blind rivets that meet ISO 15983 (formerly DIN 7337) comply with international standards for blind rivet dimensions. Those that meet IFI 114 comply with industry standards.
For technical drawings and 3-D models, click on a part number.
| For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Shear Strength, lbs. | Tensile Strength, lbs.  | Specifications Met | Pkg. Qty. | Pkg. | |
3/32" Dia. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.02"-0.125" | 0.25" | 0.097"-0.1" | No. 41 | 0.188" | 0.032" | 230 | 280 | IFI 114 Standards | 100 | 000000000 | 000000 |
| 0.126"-0.25" | 0.375" | 0.097"-0.1" | No. 41 | 0.188" | 0.032" | 230 | 280 | IFI 114 Standards | 100 | 000000000 | 00000 |
1/8" Dia. | |||||||||||
| 0.02"-0.062" | 0.212" | 0.129"-0.133" | No. 30 | 0.25" | 0.04" | 420 | 530 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.063"-0.125" | 0.29" | 0.129"-0.133" | No. 30 | 0.262" | 0.036" | 420 | 530 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.126"-0.187" | 0.352" | 0.129"-0.133" | No. 30 | 0.262" | 0.036" | 420 | 530 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.188"-0.25" | 0.4" | 0.129"-0.133" | No. 30 | 0.25" | 0.04" | 420 | 530 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.251"-0.312" | 0.462" | 0.129"-0.133" | No. 30 | 0.25" | 0.04" | 420 | 530 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.313"-0.375" | 0.5" | 0.129"-0.133" | No. 30 | 0.262" | 0.036" | 420 | 530 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.376"-0.5" | 0.65" | 0.129"-0.133" | No. 30 | 0.25" | 0.04" | 420 | 530 | IFI 114 Standards | 50 | 000000000 | 0000 |
| 0.501"-0.625" | 0.775" | 0.129"-0.133" | No. 30 | 0.25" | 0.04" | 420 | 530 | IFI 114 Standards | 50 | 000000000 | 0000 |
5/32" Dia. | |||||||||||
| 0.063"-0.125" | 0.275" | 0.16"-0.164" | No. 20 | 0.328" | 0.043" | 650 | 820 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.126"-0.187" | 0.362" | 0.16"-0.164" | No. 20 | 0.312" | 0.05" | 650 | 820 | IFI 114 Standards | 50 | 000000000 | 0000 |
| 0.188"-0.25" | 0.4" | 0.16"-0.164" | No. 20 | 0.328" | 0.043" | 650 | 820 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.251"-0.375" | 0.525" | 0.16"-0.164" | No. 20 | 0.328" | 0.043" | 650 | 820 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.376"-0.5" | 0.675" | 0.16"-0.164" | No. 20 | 0.312" | 0.05" | 650 | 820 | IFI 114 Standards | 50 | 000000000 | 0000 |
3/16" Dia. | |||||||||||
| 0.063"-0.125" | 0.3" | 0.192"-0.196" | No. 11 | 0.393" | 0.051" | 950 | 1,200 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.126"-0.25" | 0.425" | 0.192"-0.196" | No. 11 | 0.393" | 0.051" | 950 | 1,200 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.251"-0.375" | 0.55" | 0.192"-0.196" | No. 11 | 0.393" | 0.051" | 950 | 1,200 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.376"-0.5" | 0.7" | 0.192"-0.196" | No. 11 | 0.375" | 0.06" | 950 | 1,200 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.501"-0.625" | 0.825" | 0.192"-0.196" | No. 11 | 0.375" | 0.06" | 950 | 1,200 | IFI 114 Standards | 25 | 000000000 | 0000 |
| 0.626"-0.75" | 0.95" | 0.192"-0.196" | No. 11 | 0.375" | 0.06" | 950 | 1,200 | IFI 114 Standards | 25 | 000000000 | 0000 |
| 0.751"-0.875" | 1.075" | 0.192"-0.196" | No. 11 | 0.375" | 0.053" | 950 | 1,200 | IFI 114 Standards | 25 | 000000000 | 00000 |
| 0.876"-1" | 1.2" | 0.192"-0.196" | No. 11 | 0.375" | 0.053" | 950 | 1,200 | IFI 114 Standards | 25 | 000000000 | 00000 |
1/4" Dia. | |||||||||||
| 0.126"-0.25" | 0.5" | 0.257"-0.261" | F | 0.5" | 0.08" | 1,700 | 2,100 | IFI 114 Standards | 10 | 000000000 | 0000 |
| 0.251"-0.375" | 0.625" | 0.257"-0.261" | F | 0.5" | 0.08" | 1,700 | 2,100 | IFI 114 Standards | 10 | 000000000 | 0000 |
| 0.376"-0.5" | 0.75" | 0.257"-0.261" | F | 0.5" | 0.08" | 1,700 | 2,100 | IFI 114 Standards | 10 | 000000000 | 0000 |
| 0.501"-0.625" | 0.875" | 0.257"-0.261" | F | 0.5" | 0.08" | 1,700 | 2,100 | IFI 114 Standards | 5 | 000000000 | 0000 |
| 0.626"-0.75" | 1" | 0.257"-0.261" | F | 0.5" | 0.08" | 1,700 | 2,100 | IFI 114 Standards | 5 | 000000000 | 0000 |
| 0.876"-1" | 1.25" | 0.257"-0.261" | F | 0.5" | 0.08" | 1,700 | 2,100 | IFI 114 Standards | 5 | 000000000 | 0000 |
| For Material Thick., mm | Lg., mm | For Hole Size, mm | For Drill Bit Size, mm | Head Dia., mm | Head Ht., mm | Shear Strength, lbs. | Tensile Strength, lbs. | Specifications Met | Pkg. Qty. | Pkg. | |
3mm Dia. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1-3 | 6 | 3.1-3.2 | 3 | 6.5 | 0.8 | 350 | 440 | DIN 7337, ISO 15983 | 50 | 000000000 | 000000 |
| 3-5 | 8 | 3.1-3.2 | 3 | 6.5 | 0.8 | 350 | 440 | DIN 7337, ISO 15983 | 50 | 000000000 | 00000 |
| 5.5-7 | 10 | 3.1-3.2 | 3 | 6.5 | 0.8 | 350 | 440 | DIN 7337, ISO 15983 | 25 | 000000000 | 0000 |
| 7-9 | 12 | 3.1-3.2 | 3 | 6.5 | 0.8 | 350 | 440 | DIN 7337, ISO 15983 | 25 | 000000000 | 00000 |
| 9-11 | 14 | 3.1-3.2 | 3 | 6.5 | 0.8 | 350 | 440 | DIN 7337, ISO 15983 | 10 | 000000000 | 00000 |
| 11-13 | 16 | 3.1-3.2 | 3 | 6.5 | 0.8 | 350 | 440 | DIN 7337, ISO 15983 | 25 | 000000000 | 00000 |
3.2mm Dia. | |||||||||||
| 1-3 | 6 | 3.3-3.4 | 3.2 | 6.5 | 0.8 | 400 | 510 | DIN 7337, ISO 15983 | 25 | 000000000 | 0000 |
| 3-5 | 8 | 3.3-3.4 | 3.2 | 6.5 | 0.8 | 400 | 510 | DIN 7337, ISO 15983 | 25 | 000000000 | 0000 |
| 5.5-7 | 10 | 3.3-3.4 | 3.2 | 6.5 | 0.8 | 400 | 510 | DIN 7337, ISO 15983 | 25 | 000000000 | 0000 |
| 7-9 | 12 | 3.3-3.4 | 3.2 | 6.5 | 0.8 | 400 | 510 | DIN 7337, ISO 15983 | 25 | 000000000 | 00000 |
| 9-11 | 14 | 3.3-3.4 | 3.2 | 6.5 | 0.8 | 400 | 510 | DIN 7337, ISO 15983 | 25 | 000000000 | 00000 |
| 11-13 | 16 | 3.3-3.4 | 3.2 | 6.5 | 0.8 | 400 | 510 | DIN 7337, ISO 15983 | 10 | 000000000 | 0000 |
4mm Dia. | |||||||||||
| 1-2.5 | 6 | 4.1-4.2 | 4 | 8 | 1 | 560 | 780 | DIN 7337, ISO 15983 | 25 | 000000000 | 00000 |
| 2.5-4.5 | 8 | 4.1-4.2 | 4 | 8 | 1 | 560 | 780 | DIN 7337, ISO 15983 | 25 | 000000000 | 00000 |
| 4.5-6.5 | 10 | 4.1-4.2 | 4 | 8 | 1 | 560 | 780 | DIN 7337, ISO 15983 | 25 | 000000000 | 0000 |
| 6.5-8.5 | 12 | 4.1-4.2 | 4 | 8 | 1 | 560 | 780 | DIN 7337, ISO 15983 | 25 | 000000000 | 00000 |
| 8.5-10.5 | 14 | 4.1-4.2 | 4 | 8 | 1 | 560 | 780 | DIN 7337, ISO 15983 | 10 | 000000000 | 0000 |
| 8.5-12 | 16 | 4.1-4.2 | 4 | 8 | 1 | 560 | 780 | DIN 7337, ISO 15983 | 25 | 000000000 | 00000 |
| 12-16 | 20 | 4.1-4.2 | 4 | 8 | 1 | 560 | 780 | DIN 7337, ISO 15983 | 10 | 000000000 | 0000 |
| 16-21 | 25 | 4.1-4.2 | 4 | 8 | 1 | 560 | 780 | DIN 7337, ISO 15983 | 10 | 000000000 | 00000 |
4.8mm Dia. | |||||||||||
| 2-4 | 8 | 4.9-5 | 4.8 | 9.5 | 1.1 | 850 | 1,010 | DIN 7337, ISO 15983 | 10 | 000000000 | 0000 |
| 4-6 | 10 | 4.9-5 | 4.8 | 9.5 | 1.1 | 850 | 1,010 | DIN 7337, ISO 15983 | 25 | 000000000 | 00000 |
| 6-8 | 12 | 4.9-5 | 4.8 | 9.5 | 1.1 | 850 | 1,010 | DIN 7337, ISO 15983 | 10 | 000000000 | 0000 |
| 8-10 | 14 | 4.9-5 | 4.8 | 9.5 | 1.1 | 850 | 1,010 | DIN 7337, ISO 15983 | 25 | 000000000 | 00000 |
| 8-11 | 16 | 4.9-5 | 4.8 | 9.5 | 1.1 | 850 | 1,010 | DIN 7337, ISO 15983 | 10 | 000000000 | 0000 |
| 11-15 | 20 | 4.9-5 | 4.8 | 9.5 | 1.1 | 850 | 1,010 | DIN 7337, ISO 15983 | 10 | 000000000 | 0000 |
5mm Dia. | |||||||||||
| 2-4 | 8 | 5.1-5.2 | 5 | 9.5 | 1.1 | 940 | 1,120 | DIN 7337, ISO 15983 | 10 | 000000000 | 0000 |
| 4-6 | 10 | 5.1-5.2 | 5 | 9.5 | 1.1 | 940 | 1,120 | DIN 7337, ISO 15983 | 10 | 000000000 | 0000 |
| 6-8 | 12 | 5.1-5.2 | 5 | 9.5 | 1.1 | 940 | 1,120 | DIN 7337, ISO 15983 | 10 | 000000000 | 0000 |
| 8-10 | 14 | 5.1-5.2 | 5 | 9.5 | 1.1 | 940 | 1,120 | DIN 7337, ISO 15983 | 10 | 000000000 | 0000 |
| 8-11 | 16 | 5.1-5.2 | 5 | 9.5 | 1.1 | 940 | 1,120 | DIN 7337, ISO 15983 | 10 | 000000000 | 0000 |
| 11-15 | 20 | 5.1-5.2 | 5 | 9.5 | 1.1 | 940 | 1,120 | DIN 7337, ISO 15983 | 10 | 000000000 | 00000 |
| 15-20 | 25 | 5.1-5.2 | 5 | 9.5 | 1.1 | 940 | 1,120 | DIN 7337, ISO 15983 | 10 | 000000000 | 00000 |
| 20-25 | 30 | 5.1-5.2 | 5 | 9.5 | 1.1 | 940 | 1,120 | DIN 7337, ISO 15983 | 5 | 000000000 | 0000 |
| 25-30 | 35 | 5.1-5.2 | 5 | 9.5 | 1.1 | 940 | 1,120 | DIN 7337, ISO 15983 | 5 | 000000000 | 00000 |
| 30-35 | 40 | 5.1-5.2 | 5 | 9.5 | 1.1 | 940 | 1,120 | DIN 7337, ISO 15983 | 1 | 000000000 | 0000 |
18-8 Stainless Steel Wide-Thickness-Range Domed Head Blind Rivets
18-8 stainless steel has good corrosion resistance and may be mildly magnetic. These rivets grip a much wider range of material thicknesses than standard blind rivets. Use to join material when you only have access to one side. The low-profile domed head creates a finished appearance.
The combined thickness of material must fall within the rivet's material thickness range. Shear strength is the amount of force it takes to break a rivet from the side, and tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.
A blind rivet tool (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.
For technical drawings and 3-D models, click on a part number.
| Dia. | For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Shear Strength, lbs. | Tensile Strength, lbs. | Pkg. Qty. | Pkg. | |
| 1/8" | 0.039"-0.236" | 0.456" | 0.13"-0.134" | No. 29 | 0.287" | 0.04" | 360 | 440 | 50 | 000000000 | 000000 |
| 5/32" | 0.079"-0.315" | 0.515" | 0.161"-0.165" | No. 20 | 0.323" | 0.055" | 560 | 720 | 50 | 000000000 | 00000 |
| 3/16" | 0.059"-0.354" | 0.562" | 0.193"-0.197" | No. 11 | 0.4" | 0.063" | 930 | 1,010 | 50 | 000000000 | 00000 |
18-8 Stainless Steel Large-Diameter Domed Head Blind Rivets
18-8 stainless steel has good corrosion resistance and may be mildly magnetic. These rivets have a 50% larger head diameter than standard domed head blind rivets, distributing pressure where the head meets the material surface. Use for covering irregular holes as well as extra holding power when fastening soft, thin materials to a rigid backing. They join material when you only have access to one side. The low-profile domed head creates a finished appearance.
The combined thickness of material must fall within the rivet's material thickness range. Shear strength is the amount of force it takes to break a rivet from the side, and tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.
A blind rivet tool (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.
For technical drawings and 3-D models, click on a part number.
| For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Shear Strength, lbs. | Tensile Strength, lbs. | Specifications Met | Pkg. Qty. | Pkg. | |
1/8" Dia. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.063"-0.125" | 0.25" | 0.129"-0.133" | No. 30 | 0.39" | 0.046" | 420 | 530 | IFI 114 Standards | 100 | 000000000 | 000000 |
| 0.126"-0.187" | 0.313" | 0.129"-0.133" | No. 30 | 0.39" | 0.046" | 420 | 530 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.188"-0.25" | 0.375" | 0.129"-0.133" | No. 30 | 0.39" | 0.046" | 420 | 530 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.251"-0.312" | 0.462" | 0.129"-0.133" | No. 30 | 0.375" | 0.065" | 420 | 530 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.313"-0.375" | 0.525" | 0.129"-0.133" | No. 30 | 0.39" | 0.065" | 420 | 530 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.376"-0.5" | 0.65" | 0.129"-0.133" | No. 30 | 0.375" | 0.065" | 420 | 530 | IFI 114 Standards | 25 | 000000000 | 0000 |
5/32" Dia. | |||||||||||
| 0.02"-0.125" | 0.3" | 0.16"-0.164" | No. 20 | 0.468" | 0.075" | 650 | 820 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.126"-0.187" | 0.362" | 0.16"-0.164" | No. 20 | 0.468" | 0.075" | 650 | 820 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.188"-0.25" | 0.425" | 0.16"-0.164" | No. 20 | 0.468" | 0.075" | 650 | 820 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.251"-0.375" | 0.55" | 0.16"-0.164" | No. 20 | 0.468" | 0.075" | 650 | 820 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.376"-0.5" | 0.675" | 0.16"-0.164" | No. 20 | 0.468" | 0.075" | 650 | 820 | IFI 114 Standards | 50 | 000000000 | 00000 |
3/16" Dia. | |||||||||||
| 0.02"-0.125" | 0.325" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 950 | 1,200 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.126"-0.25" | 0.45" | 0.192"-0.196" | No. 11 | 0.65" | 0.075" | 950 | 1,200 | IFI 114 Standards | 25 | 000000000 | 0000 |
| 0.251"-0.375" | 0.575" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 950 | 1,200 | IFI 114 Standards | 25 | 000000000 | 00000 |
| 0.376"-0.5" | 0.7" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 950 | 1,200 | IFI 114 Standards | 25 | 000000000 | 00000 |
| 0.501"-0.625" | 0.825" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 950 | 1,200 | IFI 114 Standards | 25 | 000000000 | 00000 |
| 0.626"-0.75" | 0.95" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 950 | 1,200 | IFI 114 Standards | 10 | 000000000 | 0000 |
| 0.751"-0.875" | 1.075" | 0.192"-0.196" | No. 11 | 0.625" | 0.092" | 950 | 1,200 | IFI 114 Standards | 10 | 000000000 | 0000 |
| 0.876"-1" | 1.2" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 950 | 1,200 | IFI 114 Standards | 10 | 000000000 | 0000 |
18-8 Stainless Steel Domed Head Sealing Blind Rivets
18-8 stainless steel rivets have good corrosion resistance and may be mildly magnetic. The body deforms to seal the bottom of the rivet and prevent water and air from passing through. They provide higher shear and tensile strengths than standard blind rivets and the portion of the mandrel that's retained inside the rivet after installation won't loosen over time and fall out. Use blind rivets to fasten material when you only have access to one side. A low-profile domed head creates a finished appearance.
The combined thickness of material must fall within the rivet's material thickness range. Shear strength is the amount of force it takes to break a rivet from the side, and tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.
A blind rivet tool (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.
For technical drawings and 3-D models, click on a part number.
| For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Shear Strength, lbs. | Tensile Strength, lbs. | Specifications Met | Pkg. Qty. | Pkg. | |
1/8" Dia. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.031"-0.063" | 0.297" | 0.129"-0.133" | No. 30 | 0.252" | 0.05" | 400 | 450 | IFI 126 Standards | 50 | 000000000 | 000000 |
| 0.063"-0.125" | 0.36" | 0.129"-0.133" | No. 30 | 0.252" | 0.05" | 400 | 450 | IFI 126 Standards | 25 | 000000000 | 0000 |
| 0.125"-0.188" | 0.385" | 0.129"-0.133" | No. 30 | 0.262" | 0.05" | 400 | 450 | IFI 126 Standards | 25 | 000000000 | 00000 |
| 0.188"-0.252" | 0.485" | 0.129"-0.133" | No. 30 | 0.252" | 0.05" | 400 | 450 | IFI 126 Standards | 25 | 000000000 | 0000 |
| 0.25"-0.312" | 0.547" | 0.129"-0.133" | No. 30 | 0.252" | 0.05" | 400 | 450 | IFI 126 Standards | 25 | 000000000 | 0000 |
| 0.313"-0.375" | 0.61" | 0.129"-0.133" | No. 30 | 0.252" | 0.05" | 400 | 450 | IFI 126 Standards | 50 | 000000000 | 00000 |
| 0.376"-0.5" | 0.735" | 0.129"-0.133" | No. 30 | 0.252" | 0.05" | 400 | 450 | IFI 126 Standards | 25 | 000000000 | 00000 |
5/32" Dia. | |||||||||||
| 0.031"-0.125" | 0.375" | 0.16"-0.164" | No. 20 | 0.328" | 0.065" | 700 | 800 | IFI 126 Standards | 25 | 000000000 | 0000 |
| 0.125"-0.188" | 0.402" | 0.16"-0.164" | No. 20 | 0.338" | 0.065" | 700 | 800 | IFI 126 Standards | 10 | 000000000 | 00000 |
| 0.188"-0.25" | 0.5" | 0.16"-0.164" | No. 20 | 0.328" | 0.065" | 700 | 800 | IFI 126 Standards | 25 | 000000000 | 00000 |
| 0.251"-0.375" | 0.562" | 0.16"-0.164" | No. 20 | 0.328" | 0.065" | 700 | 800 | IFI 126 Standards | 50 | 000000000 | 00000 |
| 0.376"-0.5" | 0.75" | 0.16"-0.164" | No. 20 | 0.328" | 0.065" | 700 | 800 | IFI 126 Standards | 25 | 000000000 | 00000 |
3/16" Dia. | |||||||||||
| 0.02"-0.125" | 0.406" | 0.192"-0.196" | No. 11 | 0.375" | 0.06" | 850 | 900 | IFI 126 Standards | 10 | 000000000 | 0000 |
| 0.125"-0.187" | 0.468" | 0.192"-0.196" | No. 11 | 0.394" | 0.08" | 850 | 900 | IFI 126 Standards | 25 | 000000000 | 00000 |
| 0.188"-0.25" | 0.531" | 0.192"-0.196" | No. 11 | 0.375" | 0.06" | 850 | 900 | IFI 126 Standards | 10 | 000000000 | 0000 |
| 0.251"-0.375" | 0.656" | 0.192"-0.196" | No. 11 | 0.394" | 0.08" | 850 | 900 | IFI 126 Standards | 10 | 000000000 | 0000 |
| 0.376"-0.5" | 0.781" | 0.192"-0.196" | No. 11 | 0.394" | 0.08" | 850 | 900 | IFI 126 Standards | 10 | 000000000 | 0000 |
| 0.501"-0.625" | 0.906" | 0.192"-0.196" | No. 11 | 0.375" | 0.06" | 850 | 900 | IFI 126 Standards | 25 | 000000000 | 00000 |
| 0.626"-0.75" | 1.026" | 0.192"-0.196" | No. 11 | 0.394" | 0.08" | 850 | 900 | IFI 126 Standards | 10 | 000000000 | 0000 |
1/4" Dia. | |||||||||||
| 0.125"-0.25" | 0.57" | 0.257"-0.261" | F | 0.5" | 0.08" | 1,520 | 1,950 | IFI 126 Standards | 10 | 000000000 | 00000 |
| 0.251"-0.375" | 0.695" | 0.257"-0.261" | F | 0.5" | 0.08" | 1,520 | 1,950 | IFI 126 Standards | 10 | 000000000 | 00000 |
| 0.376"-0.5" | 0.82" | 0.257"-0.261" | F | 0.5" | 0.08" | 1,520 | 1,950 | IFI 126 Standards | 10 | 000000000 | 00000 |
| 0.501"-0.625" | 0.945" | 0.257"-0.261" | F | 0.5" | 0.08" | 1,520 | 1,950 | IFI 126 Standards | 10 | 000000000 | 00000 |
18-8 Stainless Steel Domed Head High-Strength Blind Rivets
18-8 stainless steel has good corrosion resistance and may be mildly magnetic. The mandrel expands the body of these rivets to completely fill the hole, providing the highest shear and tensile strengths of all the blind rivets we offer. The portion of the mandrel that's retained inside the rivet after installation won't loosen over time and fall out. Use blind rivets to fasten material when you only have access to one side. A low-profile domed head creates a finished appearance.
The combined thickness of material must fall within the rivet's material thickness range. Shear strength is the amount of force it takes to break a rivet from the side, and tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.
A blind rivet tool (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.
For technical drawings and 3-D models, click on a part number.
| For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Shear Strength, lbs. | Tensile Strength, lbs. | Specifications Met | Pkg. Qty. | Pkg. | |
1/8" Dia. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.063"-0.125" | 0.275" | 0.129"-0.133" | No. 30 | 0.25" | 0.04" | 700 | 600 | IFI 119 Standards | 10 | 000000000 | 000000 |
| 0.126"-0.25" | 0.4" | 0.129"-0.133" | No. 30 | 0.25" | 0.04" | 700 | 600 | __ | 10 | 000000000 | 0000 |
| 0.188"-0.312" | 0.462" | 0.129"-0.133" | No. 30 | 0.25" | 0.04" | 700 | 600 | __ | 10 | 000000000 | 0000 |
| 0.251"-0.375" | 0.535" | 0.129"-0.133" | No. 30 | 0.25" | 0.04" | 700 | 600 | __ | 10 | 000000000 | 0000 |
5/32" Dia. | |||||||||||
| 0.126"-0.25" | 0.425" | 0.16"-0.164" | No. 20 | 0.312" | 0.05" | 1,050 | 1,000 | IFI 119 Standards | 5 | 000000000 | 0000 |
| 0.251"-0.375" | 0.55" | 0.16"-0.164" | No. 20 | 0.312" | 0.05" | 1,050 | 1,000 | IFI 119 Standards | 5 | 000000000 | 00000 |
3/16" Dia. | |||||||||||
| 0.126"-0.25" | 0.45" | 0.192"-0.196" | No. 11 | 0.375" | 0.06" | 1,650 | 1,300 | __ | 10 | 000000000 | 00000 |
| 0.251"-0.375" | 0.575" | 0.192"-0.196" | No. 11 | 0.375" | 0.06" | 1,650 | 1,300 | __ | 5 | 000000000 | 0000 |
| 0.376"-0.5" | 0.7" | 0.192"-0.196" | No. 11 | 0.375" | 0.06" | 1,650 | 1,300 | __ | 5 | 000000000 | 00000 |
1/4" Dia. | |||||||||||
| 0.126"-0.25" | 0.5" | 0.257"-0.261" | F | 0.5" | 0.08" | 2,450 | 2,250 | __ | 5 | 000000000 | 00000 |
| 0.251"-0.375" | 0.625" | 0.257"-0.261" | F | 0.5" | 0.08" | 2,450 | 2,250 | __ | 1 | 000000000 | 0000 |
| 0.376"-0.5" | 0.75" | 0.257"-0.261" | F | 0.5" | 0.08" | 2,450 | 2,250 | __ | 1 | 000000000 | 0000 |
18-8 Stainless Steel Wide-Thickness-Range
Domed Head High-Strength Blind Rivets
18-8 stainless steel has good corrosion resistance and may be mildly magnetic. These rivets can grip a wider range of material thicknesses than standard high-strength rivets. The mandrel expands the rivet body to completely fill the hole, providing the highest shear and tensile strengths of all the blind rivets we offer. The portion of the mandrel that's retained inside the rivet after installation won't loosen over time and fall out. Use blind rivets to fasten material when you only have access to one side. A low-profile domed head creates a finished appearance.
The combined thickness of material must fall within the rivet's material thickness range. Shear strength is the amount of force it takes to break a rivet from the side, and tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.
A blind rivet tool (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.
For technical drawings and 3-D models, click on a part number.
| For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Shear Strength, lbs. | Tensile Strength, lbs. | Specifications Met | Pkg. Qty. | Pkg. | |
3/16" Dia. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.062"-0.272" | 0.415" | 0.191"-0.201" | No. 11 | 0.385" | 0.085" | 1,300 | 1,050 | IFI 134 Standards | 10 | 000000000 | 00000 |
| 0.062"-0.437" | 0.582" | 0.191"-0.201" | No. 11 | 0.4" | 0.101" | 1,300 | 950 | IFI 134 Standards | 10 | 000000000 | 0000 |
1/4" Dia. | |||||||||||
| 0.083"-0.375" | 0.56" | 0.261"-0.272" | I | 0.525" | 0.117" | 2,350 | 1,800 | IFI 134 Standards | 10 | 000000000 | 00000 |
| 0.35"-0.625" | 0.81" | 0.261"-0.272" | I | 0.525" | 0.117" | 2,350 | 1,800 | IFI 134 Standards | 10 | 000000000 | 00000 |
18-8 Stainless Steel Domed Head Solid Rivets
18-8 stainless steel rivets are more corrosion resistant than those made of aluminum, brass, or copper, and they may be mildly magnetic.
Installation of solid rivets requires access to both sides of the material as well as a hammer or a solid rivet tool. To achieve the most consistent results and a professional appearance, we recommend using a riveting air hammer with a rivet setter that matches the rivet's head style, and a bucking bar.
For technical drawings and 3-D models, click on a part number.
| For Max. Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Domed Head Style | Head Dia. | Head Ht. | Pkg. Qty. | Pkg. | |
3/32" Dia. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 0.203" | 0.25" | 0.096" | No. 41 | Round | 0.182" | 0.077" | 250 | 000000000 | 000000 |
| 0.453" | 0.5" | 0.096" | No. 41 | Round | 0.182" | 0.077" | 100 | 000000000 | 0000 |
1/8" Dia. | |||||||||
| 0.126" | 0.188" | 0.129" | No. 30 | Round | 0.235" | 0.1" | 100 | 000000000 | 0000 |
| 0.188" | 0.25" | 0.129" | No. 30 | Round | 0.235" | 0.1" | 100 | 000000000 | 0000 |
| 0.251" | 0.313" | 0.129" | No. 30 | Round | 0.235" | 0.1" | 100 | 000000000 | 0000 |
| 0.313" | 0.375" | 0.129" | No. 30 | Round | 0.235" | 0.1" | 100 | 000000000 | 0000 |
| 0.438" | 0.5" | 0.129" | No. 30 | Round | 0.235" | 0.1" | 100 | 000000000 | 0000 |
| 0.563" | 0.625" | 0.129" | No. 30 | Round | 0.235" | 0.1" | 100 | 000000000 | 0000 |
| 0.688" | 0.75" | 0.129" | No. 30 | Round | 0.235" | 0.1" | 50 | 000000000 | 0000 |
| 0.938" | 1" | 0.129" | No. 30 | Round | 0.235" | 0.1" | 50 | 000000000 | 0000 |
5/32" Dia. | |||||||||
| 0.172" | 0.25" | 0.156" | 5/32" | Round | 0.29" | 0.124" | 100 | 000000000 | 0000 |
| 0.297" | 0.375" | 0.156" | 5/32" | Round | 0.29" | 0.124" | 100 | 000000000 | 00000 |
| 0.422" | 0.5" | 0.156" | 5/32" | Round | 0.29" | 0.124" | 100 | 000000000 | 00000 |
| 0.672" | 0.75" | 0.156" | 5/32" | Round | 0.29" | 0.124" | 50 | 000000000 | 0000 |
| 0.922" | 1" | 0.156" | 5/32" | Round | 0.29" | 0.124" | 50 | 000000000 | 0000 |
3/16" Dia. | |||||||||
| 0.156" | 0.25" | 0.191" | No. 11 | Round | 0.348" | 0.147" | 50 | 000000000 | 0000 |
| 0.219" | 0.313" | 0.191" | No. 11 | Round | 0.348" | 0.147" | 50 | 000000000 | 0000 |
| 0.281" | 0.375" | 0.191" | No. 11 | Round | 0.348" | 0.147" | 50 | 000000000 | 0000 |
| 0.406" | 0.5" | 0.191" | No. 11 | Round | 0.348" | 0.147" | 50 | 000000000 | 0000 |
| 0.531" | 0.625" | 0.191" | No. 11 | Round | 0.348" | 0.147" | 50 | 000000000 | 0000 |
| 0.656" | 0.75" | 0.191" | No. 11 | Round | 0.348" | 0.147" | 50 | 000000000 | 0000 |
| 0.906" | 1" | 0.191" | No. 11 | Round | 0.348" | 0.147" | 50 | 000000000 | 00000 |
| 1.156" | 1.25" | 0.191" | No. 11 | Round | 0.348" | 0.147" | 25 | 000000000 | 0000 |
| 1.406" | 1.5" | 0.191" | No. 11 | Round | 0.348" | 0.147" | 25 | 000000000 | 0000 |
1/4" Dia. | |||||||||
| 0.25" | 0.375" | 0.256" | 6.5 mm | Round | 0.46" | 0.196" | 50 | 000000000 | 00000 |
| 0.375" | 0.5" | 0.256" | 6.5 mm | Round | 0.46" | 0.196" | 25 | 000000000 | 0000 |
| 0.5" | 0.625" | 0.256" | 6.5 mm | Round | 0.46" | 0.196" | 25 | 000000000 | 0000 |
| 0.625" | 0.75" | 0.256" | 6.5 mm | Round | 0.46" | 0.196" | 25 | 000000000 | 0000 |
| 0.875" | 1" | 0.256" | 6.5 mm | Round | 0.46" | 0.196" | 25 | 000000000 | 00000 |
| 1.125" | 1.25" | 0.256" | 6.5 mm | Round | 0.46" | 0.196" | 25 | 000000000 | 00000 |
| 1.375" | 1.5" | 0.256" | 6.5 mm | Round | 0.46" | 0.196" | 25 | 000000000 | 00000 |
| 1.875" | 2" | 0.256" | 6.5 mm | Round | 0.46" | 0.196" | 10 | 000000000 | 0000 |
5/16" Dia. | |||||||||
| 0.469" | 0.625" | 0.316" | O | Round | 0.572" | 0.243" | 10 | 000000000 | 0000 |
| 0.844" | 1" | 0.316" | O | Round | 0.572" | 0.243" | 10 | 000000000 | 0000 |
Screw Nails for Metal, Plastic, and Plywood
Also known as round-head Type U drive screws, these fasteners drive like nails but hold with screw-like strength. Use them in drilled and punched holes. The hole size should be slightly smaller than the shank diameter.
18-8 stainless steel screw nails have good corrosion resistance and may be mildly magnetic.
For technical drawings and 3-D models, click on a part number.
| Size | Lg. | Nail Gauge | Shank Dia. | Head Dia. | Head Type | Shank Type | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 00 | 1/8" | 16 ga. | 0.06" | 3/32" | Domed | Screw | 100 | 000000000 | 00000 |
| 00 | 3/16" | 16 ga. | 0.06" | 3/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 00 | 1/4" | 16 ga. | 0.06" | 3/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 00 | 3/8" | 16 ga. | 0.06" | 3/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 0 | 1/8" | 14 ga. | 0.08" | 1/8" | Domed | Screw | 100 | 000000000 | 0000 |
| 0 | 3/16" | 14 ga. | 0.08" | 1/8" | Domed | Screw | 100 | 000000000 | 0000 |
| 0 | 1/4" | 14 ga. | 0.08" | 1/8" | Domed | Screw | 100 | 000000000 | 0000 |
| 0 | 3/8" | 14 ga. | 0.08" | 1/8" | Domed | Screw | 100 | 000000000 | 0000 |
| 2 | 1/8" | 12 ga. | 0.1" | 5/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 2 | 3/16" | 12 ga. | 0.1" | 5/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 2 | 1/4" | 12 ga. | 0.1" | 5/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 2 | 5/16" | 12 ga. | 0.1" | 5/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 2 | 3/8" | 12 ga. | 0.1" | 5/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 2 | 1/2" | 12 ga. | 0.1" | 5/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 4 | 3/16" | 11 ga. | 0.12" | 7/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 4 | 1/4" | 11 ga. | 0.12" | 7/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 4 | 5/16" | 11 ga. | 0.12" | 7/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 4 | 3/8" | 11 ga. | 0.12" | 7/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 6 | 1/4" | 10 ga. | 0.14" | 1/4" | Domed | Screw | 100 | 000000000 | 0000 |
| 6 | 5/16" | 10 ga. | 0.14" | 1/4" | Domed | Screw | 100 | 000000000 | 0000 |
| 6 | 3/8" | 10 ga. | 0.14" | 1/4" | Domed | Screw | 100 | 000000000 | 0000 |
| 7 | 5/16" | 9 ga. | 0.15" | 9/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 7 | 3/8" | 9 ga. | 0.15" | 9/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 7 | 1/2" | 9 ga. | 0.15" | 9/32" | Domed | Screw | 100 | 000000000 | 0000 |
| 8 | 1/4" | 8 ga. | 0.17" | 5/16" | Domed | Screw | 100 | 000000000 | 0000 |
| 8 | 3/8" | 8 ga. | 0.17" | 5/16" | Domed | Screw | 100 | 000000000 | 0000 |
| 8 | 1/2" | 8 ga. | 0.17" | 5/16" | Domed | Screw | 100 | 000000000 | 0000 |
| 8 | 5/8" | 8 ga. | 0.17" | 5/16" | Domed | Screw | 100 | 000000000 | 00000 |
| 10 | 3/8" | 7 ga. | 0.18" | 11/32" | Domed | Screw | 100 | 000000000 | 00000 |
| 10 | 1/2" | 7 ga. | 0.18" | 11/32" | Domed | Screw | 100 | 000000000 | 00000 |
| 10 | 5/8" | 7 ga. | 0.18" | 11/32" | Domed | Screw | 100 | 000000000 | 00000 |
| 12 | 1/2" | 6 ga. | 0.21" | 13/32" | Domed | Screw | 100 | 000000000 | 00000 |
| 12 | 3/4" | 6 ga. | 0.21" | 13/32" | Domed | Screw | 100 | 000000000 | 00000 |
| 14 | 1/2" | 4 ga. | 0.24" | 7/16" | Domed | Screw | 100 | 000000000 | 00000 |
| 14 | 3/4" | 4 ga. | 0.24" | 7/16" | Domed | Screw | 100 | 000000000 | 00000 |
Screw Nail Assortments
Also known as round-head Type U drive screws. Drive these into drilled or punched holes like a nail and get the hold of a screw when fastening sheet metal, plastic, and plywood. Hole size should be slightly smaller than the shank diameter.
18-8 stainless steel nails are chemical resistant and may be mildly magnetic.
| Number of Pieces | Sizes Included | Container Type | Each | |
18-8 Stainless Steel | ||||
|---|---|---|---|---|
| 1,200 | No. 0 to No. 6 in 1/8" to 3/8" Lengths | Plastic Box | 000000000 | 0000000 |