A plastic cover insulates the barrel to prevent short-circuiting with nearby wire.

A plastic cover on the barrel provides electrical insulation to prevent short-circuiting from nearby wire. These terminals have an elongated ring that can be mounted with a range of screw sizes.

Mount these elongated ring terminals on a range of threaded screw and stud sizes—their connection is more secure than spade or hook terminals.

With a heat-resistant PVDF cover on the barrel, these terminals are best for high-temperature applications where you want to prevent short-circuiting with nearby wire.

When heat is applied, the enclosed solder melts, creating the most secure and electrically conductive connection we offer. The plastic insulation also shrinks when heated, forming a seal to keep out water and contaminants.

With a thicker ring and a plastic cover on the barrel, these terminals are more durable than standard ring terminals and insulated to prevent short circuiting with nearby wire.

A plastic cover on the barrel provides electrical insulation to prevent short-circuiting with nearby wire. These terminals have a serrated edge on the inside of the ring that grips the mounting screw for a secure hold.

Use a compression tool to attach lugs to wire. Mount them to a screw.

The barrel is longer than other lugs, so you can compress it twice for an extra-tight grip in high-vibration applications.

With a thicker tab and OD, these lugs are more durable and dissipate more heat from high electrical loads than standard compression lugs. They have a long barrel, so you can compress them twice for an extra-tight grip in high-vibration applications.

Tighten the set screw for a secure connection without crimping. Mount lugs to a screw.

Mount these lugs to a surface to create electrical connections without needing to cut or splice the conductor wire. For a secure connection without crimping, tighten the set screw onto the wire.

Often used in tight spaces, these lugs allow wire to enter at several angles.