Static Control Push-Top Dispensers






An additive prevents electrostatic discharge from building up on the surface of this dispenser.
For technical drawings and 3-D models, click on a part number.
Contents Message | Electrical Properties | Surface Resistivity, ohms/sq. | Cap., fl. oz. | Wd. | Dp. | Ht. | Dish Dia. | Color | Pump Material | Features | Specifications Met | Each | ||
Opaque Polyethylene Plastic | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
A | __ | Static Dissipative | 104-1011 | 4 | 2 1/8" | 2 1/8" | 3 1/4" | 1 1/2" | Blue | 303 Stainless Steel | __ | __ | 0000000 | 000000 |
A | __ | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Blue | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
A | __ | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Green | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
A | __ | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Orange | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
A | __ | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Yellow | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
A | __ | Static Dissipative | 104-1011 | 8 | 2 1/8" | 2 1/8" | 5" | 1 1/2" | Blue | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
B | __ | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Blue | 303 Stainless Steel | Locking Cap | __ | 0000000 | 00000 |
C | __ | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Blue | 303 Stainless Steel | Locking Cap | __ | 0000000 | 00000 |
C | __ | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Yellow | 303 Stainless Steel | Locking Cap | __ | 0000000 | 00000 |
D | Flux Remover | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Blue | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
D | Flux Remover | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Orange | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
E | Acetone | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Blue | 303 Stainless Steel | __ | GHS Standards | 0000000 | 00000 |
E | Isopropanol | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Blue | 303 Stainless Steel | __ | GHS Standards | 0000000 | 00000 |
E | Toluene | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Blue | 303 Stainless Steel | __ | GHS Standards | 0000000 | 00000 |
F | Acetone | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Blue | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
F | Acetone | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Green | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
F | Acetone | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Orange | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
F | Acetone | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Yellow | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
F | Acetone | Static Dissipative | 104-1011 | 8 | 2 1/8" | 2 1/8" | 5" | 1 1/2" | Blue | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
F | Blank | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Blue | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
F | Isopropanol | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Blue | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
F | Isopropanol | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Green | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
F | Isopropanol | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Orange | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
F | Isopropanol | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Yellow | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
F | Isopropanol | Static Dissipative | 104-1011 | 8 | 2 1/8" | 2 1/8" | 5" | 1 1/2" | Blue | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
Push-Top Dispensers for Flammable Liquids
Dispense flammable liquids with these FM-approved push-top dispensers. Excess liquid drains back into the dispenser through a mesh flame-arrester plate.
For technical drawings and 3-D models, click on a part number.


Capacity | Diameter | Height | Dish Diameter | Color | Clarity | Pump Material | Specifications Met | Each | |
Powder-Coated Steel | |||||||||
---|---|---|---|---|---|---|---|---|---|
16 fl. oz. | 4 7/8" | 5 1/4" | 2 3/4" | Red | __ | Brass | FM Approved | 000000 | 000000 |
32 fl. oz. | 7 1/4" | 5 5/8" | 5" | Red | __ | Brass | FM Approved | 000000 | 00000 |
64 fl. oz. | 7 1/4" | 7 3/8" | 5" | Red | __ | Brass | FM Approved | 000000 | 00000 |
1 gal. | 7 1/4" | 10 1/2" | 5" | Red | __ | Brass | FM Approved | 000000 | 000000 |
Polyethylene Plastic | |||||||||
32 fl. oz. | 5 1/4" | 9 3/4" | 5 1/4" | Red | Opaque | Brass | FM Approved | 0000000 | 000000 |
64 fl. oz. | 6 1/2" | 11" | 5 1/4" | Red | Opaque | Brass | FM Approved | 0000000 | 000000 |
1 gal. | 7 3/4" | 13" | 5 1/4" | Red | Opaque | Brass | FM Approved | 0000000 | 000000 |


Push-Top Dispensers


White
Polyethylene Plastic Dispenser


Moisten swabs and wipes by pushing down on the top.
Dispensers with locking cap prevent spills.
Amber glass dispenser is good for light-sensitive contents.
For technical drawings and 3-D models, click on a part number.
Dispensers | Replacement Stems | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap., fl. oz. | Dia. | Wd. | Dp. | Ht. | Dish Dia. | Clarity | Pump Material | Each | Pkg. Qty. | Pkg. | ||
Amber Glass | ||||||||||||
4 | 2 1/8" | __ | __ | 4 1/8" | 1 1/2" | Semi-Clear | 303 Stainless Steel | 0000000 | 000000 | 25 | 0000000 | 00000 |
White Polyethylene Plastic | ||||||||||||
2 | __ | 1 5/8" | 2" | 3 3/4" | 1 1/2" | Semi-Clear | 303 Stainless Steel | 0000000 | 00000 | 25 | 0000000 | 0000 |
4 | __ | 2" | 2 1/8" | 3 3/8" | 1 1/2" | Semi-Clear | 303 Stainless Steel | 0000000 | 00000 | 25 | 0000000 | 0000 |
6 | __ | 2 1/8" | 2 1/8" | 4 1/2" | 1 1/2" | Semi-Clear | 303 Stainless Steel | 0000000 | 00000 | 25 | 0000000 | 0000 |
8 | __ | 2 1/8" | 2 1/8" | 5 1/4" | 1 1/2" | Semi-Clear | 303 Stainless Steel | 0000000 | 00000 | 25 | 0000000 | 0000 |
Tin-Plated Steel | ||||||||||||
4 | 2 1/8" | __ | __ | 3 3/4" | 1 1/2" | __ | 303 Stainless Steel | 0000000 | 00000 | 25 | 0000000 | 0000 |
Dispensers | Replacement Stems | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap., fl. oz. | Dia. | Wd. | Dp. | Ht. | Dish Dia. | Clarity | Pump Material | Each | Pkg. Qty. | Pkg. | ||
Amber Glass | ||||||||||||
4 | 2" | __ | __ | 4 1/4" | 1 5/8" | Semi-Clear | 303 Stainless Steel | 0000000 | 000000 | 25 | 0000000 | 00000 |
White Polyethylene Plastic | ||||||||||||
4 | __ | 2" | 2" | 3 1/8" | 1 1/2" | Semi-Clear | 303 Stainless Steel | 0000000 | 00000 | 25 | 0000000 | 0000 |
6 | __ | 2 1/8" | 2 1/8" | 4 3/8" | 1 1/2" | Semi-Clear | 303 Stainless Steel | 0000000 | 00000 | 25 | 0000000 | 0000 |
8 | __ | 2 1/8" | 2 1/8" | 5 1/8" | 1 1/2" | Semi-Clear | 303 Stainless Steel | 0000000 | 00000 | 25 | 0000000 | 0000 |
Tin-Plated Steel | ||||||||||||
4 | 2 1/8" | __ | __ | 3 7/8" | 1 5/8" | __ | 303 Stainless Steel | 0000000 | 00000 | 25 | 0000000 | 0000 |
Push-to-Dispense Bottles for Flammable Liquids



Turn these bottles upside down and press the flange to dispense.
Cap., fl. oz. | Dia. | Ht. | Clarity | Color | Material | Pump Material | Specifications Met | Each | ||
A | 8 | 3 1/8" | 5 1/2" | Opaque | Red | Polyethylene Plastic | Brass | FM Approved | 000000 | 000000 |
A | 8 | 3 1/8" | 5 1/2" | Semi-Clear | White | Polyethylene Plastic | Brass | FM Approved | 000000 | 00000 |
B | 32 | 4" | 10 1/2" | Opaque | Red | Polyethylene Plastic | Brass | FM Approved | 000000 | 00000 |
B | 32 | 4" | 10 1/2" | Semi-Clear | White | Polyethylene Plastic | Brass | FM Approved | 000000 | 00000 |
C | 4 | 2 1/4" | 5 1/2" | Semi-Clear | White | Polyethylene Plastic | Brass | FM Approved | 000000 | 00000 |
Bottle-Top Dispensers

Often used in laboratories, these dispensers fit on most lab bottles. Push down on the top to dispense precise amounts of acids, solvents, and other liquids.
For technical drawings and 3-D models, click on a part number.
Flow Rate, ml/stroke | For Mouth OD | Ht. | Spout Lg. | Graduation Marks | Pump Material | Spout Material | Seal Material | Intake Tube Material | Max. Temperature, °F | Includes | Each | |
0.2-2 | 1 1/4", 1 1/2", 1 3/4" | 7 1/2" | 4" | 0.04 ml | Polyethylene Plastic | FEP Plastic | EPDM Rubber | Polypropylene Plastic | 100° | Two Thread Adapters | 0000000 | 0000000 |
1-10 | 1 1/4", 1 1/2", 1 3/4" | 7 1/2" | 4" | 0.2 ml | Polyethylene Plastic | FEP Plastic | EPDM Rubber | Polypropylene Plastic | 100° | Two Thread Adapters | 0000000 | 000000 |
2.5-25 | 1 1/4", 1 1/2", 1 3/4" | 7 1/2" | 4" | 0.5 ml | Polyethylene Plastic | FEP Plastic | EPDM Rubber | Polypropylene Plastic | 100° | Two Thread Adapters | 0000000 | 000000 |