These cable ties have a smooth body and a metal-toothed head that allows them to cinch more closely to your bundle.

Standard ties balance flexibility and strength, making them good for most bundling applications.

Whether you plan to change the bundle size or need a temporary hold, these ties have a release tab for removal and reuse.

Push-release ties have a low profile but can be difficult to release. They're best when used for bundling cable against a hard surface, such as pipe, because the surface gives you support to push the tab in. To release, push the tab toward the head.

Squeeze-release ties are the easiest to release but take up the most space. The head sticks out, so you can use your fingers as support while pressing down the tab with your thumb. This easy release makes these ties a good choice when you have reduced dexterity, such as while wearing gloves or only using one hand.

Ties with a tuck-back head have an additional slot to tuck the excess tail away. This means you don’t have to cut the tail, preventing sharp edges from nicking you.

Standard ties balance flexibility and strength, making them good for most bundling applications. Wide and extra-wide ties are stronger but less flexible than standard cable ties. Use them for heavy duty applications that require extra strength.

Use these plastic cable ties when detection and retrieval are essential, such as in food processing applications. Ties are brightly colored for visibility and contain a special compound that can be picked up by X-ray equipment and metal detectors.

Narrow ties are highly flexible and conform to irregularly shaped material better than standard and wide cable ties.

For technical drawings and 3-D models, click on a part number.

For use in environments subjected to chemicals, these ties withstand the most corrosive conditions. PEEK ties withstand most chemicals and extreme temperatures, making them an alternative to metal ties.

Wide ties are stronger but less flexible than our narrow and standard cable ties. Use these ties for heavy duty applications that require extra strength.

Take the guesswork out of identifying material—use a marker on the attached tag to label the bundle.

For technical drawings and 3-D models, click on a part number.

Use different colored ties to identify bundles at a glance. A release tab makes these ties easy to remove and use again. Since the head sticks out, you can squeeze the tab and pull to release with one hand, even while wearing gloves. Tuck the excess tail into the slot to avoid having to cut it, which can leave sharp edges that may nick you.

For technical drawings and 3-D models, click on a part number.

Remove these cable ties with ease.

Twist-off cable ties have wings on the head that you rotate to remove them.

Attach these cable ties directly to a surface—no separate mount needed.

Screw-in mount ties require a fastener.

Push-in mount ties fit into a drilled hole. Tapered-head ties are easy to slide into a hole. Once in, they have a clip that expands for a tight fit. These ties are easier to pull out than barbed-head ties. Those with wings are stable even in high-vibration applications, such as automobile panels. They will not rotate. Standard ties balance flexibility and strength, making them good for most bundling applications. Wide and extra-wide ties are stronger but less flexible than our narrow and standard cable ties. Use them for heavy duty applications that require extra strength.

Reduce gaps between the cable tie and bundle—these ties have a smooth body that allows them to adjust to the exact size of the material.

Standard ties balance flexibility and strength, making them good for most bundling applications.

Made from stainless steel, these ties can be used in environments where they might be exposed to chemicals and UV rays.

304 stainless steel ties have strong chemical and UV resistance. However, they don’t resist corrosion as well as 316 stainless steel ties. 316 stainless steel ties can be used in the harshest environments. They resist corrosion better than 304 stainless steel ties.

Solid locking ties have a locking ball in the head for a strong hold. Perforated locking ties have teeth in the head that lock into the notches on the strap, providing the most secure hold.

Use the optional tensioning tool for more tension than hand tightening.

The plastic coating on these ties adds an additional level of corrosion and abrasion resistance over other stainless steel cable ties.

Solid locking ties have a locking ball in the head for a strong hold. Perforated locking ties have teeth in the head that lock into the notches on the strap, providing the most secure hold.

These ties are flexible, reusable, and adjustable for delicate bundles or bundles that frequently change in size.

Take the guesswork out of identifying material—use the attached tag to label the bundle.

These ties meet UL flammability requirements.

Ties are made from heat-resistant fabric to withstand high temperatures. The buckle allows you to cinch these ties tight.

Route and organize wire, cable, and hose along your DIN rail. Unlike zip ties, these cable ties can be temporarily undone to add or remove material. Clip their base to DIN 3 rail, which is the most commonly used size. All meet UL 94 V-0, which means they quickly self-extinguish, making them good for hot and poorly ventilated environments such as server rooms.

Mount bundles to surfaces with a screw or fastener. Since the mounting grommet on these ties is not accessible after material has been bundled, these ties are best for a permanent installation. All have a feed-through plastic buckle, so they can be cinched tight.

For technical drawings and 3-D models, click on a part number.