Combination Wrenches
 12-Point Box Opening |  |
 |
Wrenches with a 12-point opening are easier to position on hex fasteners than wrenches with a 6-point opening but make less contact.
For technical drawings and 3-D models, click on a part number.
Ratcheting Combination Wrenches
A ratchet mechanism in the box end allows you to turn fasteners in tight spaces without removing and repositioning the wrench. Flip these wrenches over to ratchet in the opposite direction. The smaller the turn required to ratchet, the less clearance you need to engage the ratchet. Wrenches are polished for a mirror-like finish.
For technical drawings and 3-D models, click on a part number.
Box End | Open End | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Drive Size | Overall Lg. | Head Thick. | Turn Required to Ratchet | Opening Angle | Head Thick. | Material | Appearance | Each | |
Inch—12-Point Box Opening | |||||||||
| 1 7/8" | 25 1/2" | 63/64" | 5° | 15° | 27/32" | Chrome-Plated Steel | Polished | 0000000 | 0000000 |
Open-End Wrenches
For technical drawings and 3-D models, click on a part number.
| Drive Size | Overall Lg. | Opening Angle | Head Thick. | Material | Finish | Specifications Met | Each | |
Inch | ||||||||
|---|---|---|---|---|---|---|---|---|
Rounded Opening | ||||||||
| 1 7/8" | 16 1/2" | 15° | 15/16" | Steel | Black Oxide | ASME B107.100 | 0000000 | 0000000 |
Two-Head Open-End Wrenches
Wrenches with square openings provide the best grip on square fasteners.
For technical drawings and 3-D models, click on a part number.
Dull Chrome Plated | ||||
|---|---|---|---|---|
| Drive Size | Opening Angle | Material | Each | |
Inch | ||||
Rounded Openings | ||||
| 1 7/8" × 2" | 15° | Steel | 0000000 | 0000000 |
60° Angle Open-End Wrenches
One head is angled 60° for access to hard-to-reach fasteners. These tools are also known as ignition wrenches.
For technical drawings and 3-D models, click on a part number.
Tight-Clearance Open-End Wrenches
Fit the narrow head into tight spaces and around thin fasteners.
For technical drawings and 3-D models, click on a part number.
Striking Open-End Wrenches
Strike the handle with a hammer to break stuck fasteners free. These are also known as slugging wrenches.
For technical drawings and 3-D models, click on a part number.
| Drive Size | Overall Lg. | Opening Angle | Head Thick. | Material | Specifications Met | Each | |
Rounded Opening | |||||||
|---|---|---|---|---|---|---|---|
Inch | |||||||
| 1 7/8" | 10" | 15° | 25/32" | Steel | DIN 133 | 00000000 | 0000000 |
Deep-Offset Tapered-Handle Open-End Wrenches
The head is offset 45° to provide clearance when reaching over obstructions.
For technical drawings and 3-D models, click on a part number.
| Drive Size | Overall Lg. | Opening Angle | Head Thick. | Head Offset Angle | Material | Finish | Specifications Met | Each | |
Rounded Opening | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1 7/8" | 24" | Straight | 13/16" | 45° | Steel | Black Oxide | ASME B107.100 | 0000000 | 0000000 |
Tapered-Handle Open-End Wrenches
Also known as spud, structural, and construction wrenches, use the pointed end of the handle to align bolt holes during assembly.
For technical drawings and 3-D models, click on a part number.
| Drive Size | Overall Lg. | Opening Angle | Head Thick. | Material | Finish | Specifications Met | Each | |
Rounded Opening | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1 7/8" | 23" | 15° | 15/16" | Steel | Black Oxide | ASME B107.100 | 0000000 | 0000000 |
Multi-Size Open-End Wrenches
Also known as alligator wrenches and water-meter nut wrenches, the V-shaped head fits multiple hex fastener sizes.
| Drive Size | Overall Lg. | Opening Angle | Head Thick. | Jaw Finish | Material | Color | Grip Material | Each | |
| 3/4"–2" | 21" | Straight | 11/16" | Zinc Plated | Powder-Coated Steel | Red | Plastic | 0000000 | 0000000 |
12-Point Sockets
The 12-point shape quickly positions on hex fasteners. These sockets are for hand-driven use only.
For technical drawings and 3-D models, click on a part number.
Tight-Clearance Offset Sockets
Often used with an extension, these sockets turn fasteners and fittings in obstructed areas that a regular socket can't reach. They are also known as crowfoot wrenches.
For technical drawings and 3-D models, click on a part number.
| Drive Size | Overall Lg. | Thick. | Center-to-Center Lg. | Material | Each | |
Inch | ||||||
|---|---|---|---|---|---|---|
1/2" Square Drive | ||||||
| 1 7/8" | 3 5/8" | 9/16" | 2 3/16" | Chrome-Plated Steel | 0000000 | 000000 |
Secure-Grip Tight-Clearance Offset Sockets
The opening makes more contact with fasteners for a better grip than standard open-end sockets. Also known as flare-nut or line wrench sockets, they're often used with flared tube fittings and fuel and hydraulic lines.
12-point secure-grip sockets quickly position on hex fasteners.
For technical drawings and 3-D models, click on a part number.
| Drive Size | Overall Lg. | Thick. | Center-to-Center Lg. | Material | Wrench Opening Shape | Each | |
1/2" Square Drive | |||||||
|---|---|---|---|---|---|---|---|
| 1 7/8" | 3 1/4" | 1 3/32" | 1 11/16" | Chrome-Plated Steel | 12-Point | 0000000 | 000000 |
6-Point Impact Sockets
Achieve the best possible grip on hex fasteners and prevent rounding. These sockets are made to withstand the high torque and force of impact tools.
3/4", 1", and 1 1/2" square drive size sockets require a locking retainer. Use with an impact wrench that has a pin-style socket retainer, or use a socket retaining ring with tools that have a hole- or hole-and-ring style socket retainer.
For technical drawings and 3-D models, click on a part number.
Sockets | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Clearance Depth | Retaining Rings | |||||||||
| Drive Size | Nut | Bolt | Compatible Retaining Ring ID | Material | Finish | Overall Lg. | Each | Each | ||
1/2" Square Drive | ||||||||||
| 1 7/8" | 1 3/16" | 2 3/32" | __ | Steel | Black Oxide | 2 13/16" | 00000000 | 000000 | 000000 | 00 |
3/4" Square Drive | ||||||||||
| 1 7/8" | 1 1/4" | 1 7/8" | 1 5/8" | Steel | Black Oxide | 2 13/16" | 0000000 | 00000 | 0000000 | 00000 |
1" Square Drive | ||||||||||
| 1 7/8" | 1 1/8" | 1 45/64" | 2 1/4" | Steel | Black Oxide | 2 13/16" | 00000000 | 00000 | 00000000 | 0000 |
1 1/2" Square Drive | ||||||||||
| 1 7/8" | 1 3/16" | 1 19/32" | 2 7/8" | Steel | Black Oxide | 3 5/8" | 0000000 | 000000 | 0000000 | 0000 |
Sockets | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Clearance Depth | Retaining Rings | |||||||||
| Drive Size | Nut | Bolt | Compatible Retaining Ring ID | Material | Finish | Overall Lg. | Each | Each | ||
1/2" Square Drive | ||||||||||
| 1 7/8" | 2 9/32" | 3 1/32" | __ | Steel | Black Oxide | 3 11/16" | 00000000 | 000000 | 000000 | 00 |
3/4" Square Drive | ||||||||||
| 1 7/8" | 1 3/4" | 2.9" | 1 5/8" | Steel | Black Oxide | 4 1/16" | 0000000 | 00000 | 0000000 | 00000 |
1" Square Drive | ||||||||||
| 1 7/8" | 2 3/4" | 3 1/4" | 2 1/8" | Steel | Black Oxide | 4 1/2" | 00000000 | 00000 | 0000000 | 0000 |
12-Point Impact Sockets
The 12-point shape quickly positions on hex fasteners. These sockets are made to withstand the high torque and force of impact tools.
3/4" square drive size sockets require a locking retainer. Use with an impact wrench that has a pin-style socket retainer, or use a socket retaining ring with tools that have a hole- or hole-and-ring style socket retainer.
For technical drawings and 3-D models, click on a part number.
Premium 12-Point Socket Sets
Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish. The 12-point shape quickly positions on hex fasteners.
| No. of Pieces | Components Included | Includes | Each | |
3/4" Square Drive | ||||
|---|---|---|---|---|
| 22 | 16 Sockets 2 Drive Tools 3 Extensions 1 Adapter | Standard Sockets: 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 1/4", 1 5/16", 1 3/8", 1 7/16", 1 1/2", 1 5/8", 1 11/16", 1 3/4", 1 13/16", 1 7/8", 2" 20 1/8" Long Ratchet Wrench 22 1/8" Long Flex-Head Wrench Handle 3" Long Extension 8" Long Extension 16" Long Extension 4 1/16" Square Drive Adapter | 0000000 | 000000000 |
| 29 | 22 Sockets 3 Drive Tools 3 Extensions 1 Adapter | Standard Sockets: 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 3/16", 1 1/4", 1 5/16", 1 3/8", 1 7/16", 1 1/2", 1 9/16", 1 5/8, 1 11/16", 1 3/4", 1 13/16", 1 7/8", 2", 2 1/8", 2 3/16", 2 1/4", 2 3/8" 20 1/8" Long Ratchet Wrench 19" Long Sliding-Head Wrench Handle 22 1/8" Long Flex-Head Wrench Handle 3" Long Extension 8" Long Extension 16" Long Extension 4 1/16" Long Flex Adapter | 0000000 | 00000000 |
| Foam Socket Organizer for 22 Piece 3/4" Square Drive Size Set | 0000000 | Each | 0000000 |
Ratcheting Box Wrenches
A ratchet mechanism allows you to turn fasteners in tight spaces without removing and repositioning the wrench. The smaller the turn required to ratchet, the less clearance you need to engage the ratchet.
For technical drawings and 3-D models, click on a part number.
| Drive Size | Overall Lg. | Head OD | Head Thick. | Turn Required to Ratchet | Material | Grip Material | Specifications Met | Each | |
Inch | |||||||||
|---|---|---|---|---|---|---|---|---|---|
12-Point Opening | |||||||||
| 1 7/8" | 19" | 3 3/8" | 5/8" | 20° | Chrome-Plated Steel | Plastic | Fed. Spec. GGG-W-001405 | 0000000 | 0000000 |
Striking Box Wrenches
Also known as slugging wrenches, strike the handle with a hammer to break stuck fasteners free. Wrenches with a 12-point opening are easier to position on hex fasteners than wrenches with a 6-point opening but make less contact.
For technical drawings and 3-D models, click on a part number.
| Drive Size | Overall Lg. | Head Thick. | Material | Finish | Specifications Met | Each | |
12-Point Opening | |||||||
|---|---|---|---|---|---|---|---|
| 1 7/8" | 11 3/8" | 63/64" | Steel | Black Oxide | ASME B107.100 | 0000000 | 000000 |
Deep-Offset Striking Box Wrenches
The head is offset 45° to provide clearance for reaching over obstructions. Also known as slugging wrenches, strike the handle with a hammer to break stuck fasteners free.
| Drive Size | Overall Lg. | Head Thick. | Head Offset Angle | Material | Finish | Specifications Met | Each | |
12-Point Opening | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1 7/8" | 13" | 1 3/16" | 45° | Steel | Black Oxide | ASME B107.100 | 0000000 | 0000000 |
Deep-Offset High-Leverage Box Wrenches
A 45° offset head provides clearance for reaching over obstructions. These wrenches have a long handle for extra leverage—add an extension to increase it even more.
Extension handles (sold separately) fit securely over the end of the wrench.
For technical drawings and 3-D models, click on a part number.
Tapered-Handle Box Wrenches
Also known as spud, structural, and construction wrenches, use the pointed end of the handle to align bolt holes during assembly.
For technical drawings and 3-D models, click on a part number.
| Drive Size | Overall Lg. | Head Thick. | Head Offset Angle | Material | Finish | Specifications Met | Each | |
12-Point Opening | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1 7/8" | 23" | 1 1/4" | 60° | Steel | Black Oxide | ASME B107.100 | 0000000 | 0000000 |