Hand-Held Stretch Wrap Dispensers
Wind stretch wrap around loads by hand without it tangling.
Dispensers with end cap handles have two pieces, one for each end of your roll. They include a grip ring to protect your hand and a core ring to turn the roll.
Dispensers with a straight handle allow one-handed use.
A cushion-grip handle gives you a better grip than a standard handle when wrapping objects. Tension control lets you adjust the roll's spinning speed to regulate the amount of stretch on the wrap. A wide base has a low center of gravity to prevent tipping.
Add optional coreless mandrels to apply coreless stretch wrap.
Dispensers | Optional Coreless Mandrels | |||||||
|---|---|---|---|---|---|---|---|---|
| For Roll Wd. | For Core ID | Dispenser Lg. | Material | Features | Pair | |||
End Cap Handles | ||||||||
| 3"-30" | 3" | 2 1/2" | Plastic | __ | 0000000 | 000000 | 000000 | 00 |
| Each | ||||||||
Straight Handles | ||||||||
| 3"-6" | 3" | 7" | Plastic | __ | 0000000 | 0000 | 000000 | 00 |
| 3"-6" | 3" | 7 1/2" | Steel | Cushion-Grip Handle, Tension Control | 0000000 | 00000 | 000000 | 00 |
| 14"-18" | 3" | 29 1/2" | Aluminum | Brake Lever, Tension Control | 0000000 | 000000 | 0000000 | 0000000 |
Angled Handles | ||||||||
| 12"-18" | 3" | 13 1/2" | Zinc | Cushion-Grip Handle, Tension Control | 000000 | 00000 | 000000 | 00 |
| 12"-18" | 3" | 19 1/2" | Steel | Cushion-Grip Handle, Tension Control, Wide Base | 0000000 | 000000 | 000000 | 00 |
| 18"-20" | 3" | 14" | Zinc | Cushion-Grip Handle, Tension Control | 000000 | 00000 | 000000 | 00 |
| 18"-20" | 3" | 17 1/2" | Steel | Cushion-Grip Handle, Tension Control, Wide Base | 0000000 | 000000 | 000000 | 00 |
Long-Reach Straight Handles | ||||||||
| 11"-20" | 3" | 60" | Aluminum | Brake Lever, Cushion-Grip Handle, Tension Control | 0000000 | 000000 | 0000000 | 000000 |
| Component | For Dispenser Lg. | Material | Includes | Each | |
| Bottom End Cap | 13 1/2", 14" | Zinc | __ | 0000000 | 000000 |
| Damping Washer | 13 1/2", 14" | __ | __ | 0000000 | 0000 |
| Handle Assembly Kit | 60" | __ | Cushion-Grip Handle, Snap Pin | 0000000 | 00000 |
| Knob Assembly Kit | 13 1/2", 14" | __ | Bearing, Knob, Threaded Rod, Washer | 00000000 | 00000 |
| Top End Cap | 13 1/2", 14" | Zinc | __ | 00000000 | 00000 |
| Top End Cap | 13", 29 1/2", 60" | Plastic | __ | 0000000 | 00000 |
Rolling Stretch Wrap Dispensers
Roll this dispenser wherever you need it, then wind it around pallets or packages to dispense. It has adjustable-height steering handles and an adjustable-width stretch wrap holder. Tension control lets you adjust the roll's spinning speed to regulate the amount of stretch on the wrap.
For Max. Roll | Dispenser | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | OD | For Core ID | Lg. | Wd. | Ht. | Material | Handle Style | Caster Type | Features | Each | |
| 70" | 15" | 3" | 20" | 35" | 79 1/2" | Steel | Adjustable T-Style | Four Swivel | Tension Control | 00000000 | 0000000 |
Automatic Stretch Wrap Dispensers
The powered platform on this dispenser turns a pallet while stretch wrap unrolls for effortless coverage. The dispenser’s mast controls the tension while you move the counterbalanced wrap holder up and down.
The optional ramp makes loading and unloading with pallet trucks easier.
Automatic Stretch Wrap Dispensers | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Roll | Max. Load | Platform | Dispenser | Optional Ramp | ||||||||||||||||||
| Min. Wd. | Max. Wd. | Max. OD | For Core ID | Lg. | Wd. | Ht. | Max. Speed, rpm | Dia. | Ht. | Lg. | Ht. | Power, hp | Voltage | Current | Plug Type | Power Cord Lg., ft. | Material | Features | Each | Each | ||
| 12" | 18" | 6" | 3" | 55" | 55" | 84" | 15 | 59" | 3" | 102" | 92" | 1/2 | 120V AC | 15A | Three Prong | 12 | Steel | Speed Control Knob | 0000000 | 000000000 | 0000000 | 0000000 |
Paper Roll Cutters
Cleanly tear off paper to the length you need.
Cutters for two, three, or four rolls are great if you’re packing items with different types of paper. For example, you could use them to cut general purpose paper for plastic parts and wax-coated paper for lubricated metal parts.
Cutters with a serrated blade cut cleanly through thicker material, such as reinforced paper rolls.
Paper Roll Cutters | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Roll | Mounting Holes | Replacement Blades | ||||||||||||||
| Number of Rolls | Wd. | OD | Lg. | Wd. | Ht. | Material | Mounting Location | Mounting Fasteners Included | No. of | Dia. | Features | Assembled or Unassembled | Each | Each | ||
Horizontal | ||||||||||||||||
| 1 | 6" | 9" | 8" | 7" | 8" | Powder-Coated Steel | Countertop, Under Mount, Wall | No | 4 | 1/4" | Rubber Feet, Spring-Loaded Blade | Unassembled | 00000000 | 000000 | 000000 | 00 |
| 1 | 12" | 9" | 14" | 7" | 8" | Powder-Coated Steel | Countertop, Under Mount, Wall | No | 4 | 1/4" | Rubber Feet, Spring-Loaded Blade | Assembled | 000000 | 00000 | 000000 | 00 |
| 1 | 18" | 9" | 20" | 7" | 8" | Powder-Coated Steel | Countertop, Under Mount, Wall | No | 4 | 1/4" | Rubber Feet, Spring-Loaded Blade | Assembled | 000000 | 00000 | 000000 | 00 |
| 1 | 20" | 9" | 22" | 7" | 8" | Powder-Coated Steel | Countertop, Under Mount, Wall | No | 4 | 1/4" | Rubber Feet, Spring-Loaded Blade | Assembled | 000000 | 00000 | 000000 | 00 |
| 1 | 24" | 9" | 26" | 7" | 8" | Powder-Coated Steel | Countertop, Under Mount, Wall | No | 4 | 1/4" | Rubber Feet, Spring-Loaded Blade | Assembled | 000000 | 00000 | 000000 | 00 |
| 1 | 30" | 9" | 32" | 7" | 8" | Powder-Coated Steel | Countertop, Under Mount, Wall | No | 4 | 1/4" | Rubber Feet, Spring-Loaded Blade | Assembled | 000000 | 000000 | 000000 | 00 |
| 1 | 36" | 9" | 38" | 7" | 8" | Powder-Coated Steel | Countertop, Under Mount, Wall | No | 4 | 1/4" | Rubber Feet, Spring-Loaded Blade | Assembled | 000000 | 000000 | 000000 | 00 |
| 1 | 48" | 9" | 50" | 7" | 8" | Powder-Coated Steel | Countertop, Under Mount, Wall | No | 4 | 1/4" | Rubber Feet, Spring-Loaded Blade | Unassembled | 00000000 | 000000 | 000000 | 00 |
| 1 | 60" | 9" | 62" | 7" | 8" | Powder-Coated Steel | Countertop, Under Mount, Wall | No | 4 | 1/4" | Rubber Feet, Spring-Loaded Blade | Assembled | 0000000 | 000000 | 000000 | 00 |
| 2 | 24" | 9" | 29" | 18" | 28" | Powder-Coated Steel | Countertop, Floor | No | 4 | 1/2" | Serrated Blade | Unassembled | 00000000 | 000000 | 00000000 | 000000 |
| 2 | 36" | 9" | 41" | 18" | 27" | Painted Steel | Floor | No | 4 | 7/8" | Spring-Loaded Blade | Unassembled | 00000000 | 000000 | 000000 | 00 |
| 3 | 24" | 9" | 29" | 18" | 39" | Painted Steel | Floor | No | 4 | 7/8" | Spring-Loaded Blade | Unassembled | 00000000 | 000000 | 000000 | 00 |
| 4 | 24" | 9" | 29" | 24" | 50" | Powder-Coated Steel | Countertop, Floor | No | 4 | 1/2" | Serrated Blade | Unassembled | 00000000 | 000000 | 00000000 | 00000 |
| 4 | 36" | 9" | 41" | 24" | 50" | Powder-Coated Steel | Countertop, Floor | No | 4 | 1/2" | Serrated Blade | Unassembled | 00000000 | 000000 | 00000000 | 00000 |
Vertical | ||||||||||||||||
| 1 | 27" | 9" | 14" | 14" | 35" | Powder-Coated Steel | Floor | No | 4 | 1/2" | Spring-Loaded Blade | Unassembled | 00000000 | 000000 | 000000 | 00 |
| 1 | 36" | 9" | 14" | 14" | 44" | Powder-Coated Steel | Floor | No | 4 | 1/2" | Spring-Loaded Blade | Unassembled | 0000000 | 000000 | 000000 | 00 |
| 1 | 48" | 9" | 14" | 14" | 56" | Powder-Coated Steel | Floor | No | 4 | 1/2" | Spring-Loaded Blade | Unassembled | 0000000 | 000000 | 000000 | 00 |
| 1 | 60" | 20" | 20" | 26" | 69" | Powder-Coated Steel | Floor | No | 4 | 1/2" | Gravity Blade | Unassembled | 00000000 | 000000 | 000000 | 00 |
| 2 | 27" | 9" | 26" | 25" | 35" | Powder-Coated Steel | Floor | No | 4 | 1/2" | Spring-Loaded Blade | Unassembled | 00000000 | 000000 | 000000 | 00 |
| 2 | 36" | 9" | 26" | 25" | 44" | Powder-Coated Steel | Floor | No | 4 | 1/2" | Spring-Loaded Blade | Unassembled | 00000000 | 000000 | 000000 | 00 |
| 2 | 48" | 9" | 26" | 25" | 56" | Powder-Coated Steel | Floor | No | 4 | 1/2" | Spring-Loaded Blade | Unassembled | 00000000 | 000000 | 000000 | 00 |
Wheel | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | Stem Thread Size | Stem Lg. | Caster Type | Wheel/Tread Material | Pkg. Qty. | Pkg. | |
| 3" | 1 1/4" | 3 1/2" | 125 | 1/2"-13 | 1 1/2" | 2 Swivel and 2 Swivel with Brake | Polypropylene Plastic | 4 | 0000000 | 000000 |
Stretch Wrap Holders
Store stretch wrap and hand-held stretch wrap dispensers.
Style A hold hand-held stretch wrap dispensers.
Style B hold stretch wrap.
For technical drawings and 3-D models, click on a part number.
Slatwall Holders
Store tools such as shovels and screwdrivers for convenient access.
Styles A-L are vinyl coated to protect tools from scratches.