Because these lights are compatible with DeWalt rechargeable batteries, you can keep one type of cordless tool battery on hand. Their head pivots to aim light where it's needed in areas that don't have electrical power service. Hang them by the hook or stand them up for hands-free illumination. To protect the LEDs, their plastic lens resists impact.

Style A have a head that both pivots and rotates, so they’ll point light at any angle. For flexible mounting, they have a hanging hook, belt hook, and kickstand. You can also stick their magnetic back to metal surfaces.

Note: Battery life depends on the size of your battery.

Power these lights with the same battery as your other cordless tools. They run on a Milwaukee M18 battery (sold separately) to light up work where there’s no outlet. Their head pivots to aim light where you need it, and they’re small enough to easily move from workspace to workspace. Ideal for tough jobsites, their plastic lens resists impact. You can use them outdoors and in other damp areas—rated IP54, they’re sealed against splashing liquid and humidity. They’ll also work in dusty conditions.

Style B can clamp onto 1”-3” dia. pipes. They also have a magnetic base to mount to most metal surfaces. Their head pivots horizontally and vertically.

Note: Battery life depends on the size of your battery.

Splashes and drips are no problem for these lights. They don’t need an outlet, so you can bring them wherever you’re working. With a swivel hook and a magnet, you can attach them where convenient and aim light on your task. IP rated, they’re sealed to keep water from working its way in and causing failure. Their light mimics natural daylight to give you a crisp, clear light that’s good for inspecting.

Style A have magnets at both ends and on the back of the handle. Pop them onto magnetic surfaces or stick the magnetic hook on to hang them where they work best for you. The handle has an octagonal collar, so you can set them on their side without them rolling away.

Style B come with removable mounting attachments: a hook for hanging that also doubles as a kickstand when you fold it down and a magnetic clip for attaching them to most metal surfaces. Use the light on the top as a flashlight when all you need is a narrow beam.

Style C and D have a magnet on the kickstand. You can attach them to a metal surface and adjust the angle of the light. Fold the hook into the back when you’re not using it. Style D can shine like a flashlight when you need to peer into narrow spaces.

Style E have a magnet embedded in the hook. Since the hook folds, you can use it to tilt the light toward your task. Use the light on the end as a flashlight when all you need is a narrow beam. A battery life indicator lets you know when it’s time to charge these lights. They’re tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Hang these lights where you need them on the job site.

Styles A-E come with LEDs that last longer, are more efficient, and generate less heat than other light technologies. They produce a cool light that highlights white/blue tones, which is good for inspecting. The LEDs in Styles A, B, C, and E are built-in, while Style D come with a replaceable LED bulb. All have an impact-resistant plastic lens to protect the LEDs.

Styles H and J are compatible with medium-base screw-in CFL (compact fluorescent), halogen, incandescent, and LED bulbs (sold separately), except 1550K33 is compatible with medium-base screw-in incandescent and LED bulbs. Style J have a plastic lens.

Keep excess cords out of your way—the reel locks the cord at any length and retracts it when not in use. All of these lights have a hook for hanging when you need both hands for other work.

Styles B and C have a swiveling hook, so you can aim light where you need it. Fold the hook away when not in use. They also have a magnet in back for mounting to metal. Ideal for inspecting, their daylight appearance highlights white and blue tones. A plastic lens resists impact to protect the LEDs. Mount the reel to your wall or ceiling using the included hardware. Style B can double as an extension cord for plugging in a power tool or other device.

Style D have a hook on the top and the bottom, so you can hang the light horizontally or vertically. Fold both hooks away when not in use. You can also mount these lights to metal with the removable magnet in back. Their daylight appearance highlights white and blue tones, so they’re ideal for inspecting. To protect the LEDs, they have an impact-resistant plastic lens. They come with hardware for mounting to your wall or ceiling.

This IP67 rated light withstands temporary submersion in a maximum of one meter of water for up to 30 minutes. It's compact for easy transport to job sites with no electrical power. With a head that adjusts up and down, it floods your job site with light. It has a hook and a magnet for mounting, so you can keep your hands free for other work. This light has built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. It has a durable tempered-glass lens to protect the LEDs.

Note: Battery life is significantly reduced when lights are used at the high-beam setting.

For technical drawings and 3-D models, click on a part number.

Faster and easier to reposition than articulating-arm lights, these gooseneck-arm lights attach to your workspace for additional lighting. They're more rugged than office desk lamps. All are furnished with LEDs that last longer, are more efficient, and generate less heat than other light technologies. They produce a warm light appearance that casts a yellow tone similar to incandescent lights.

These lights cast a narrower beam than other gooseneck-arm machine lights. Reposition them faster and more easily than articulating-arm lights. They have a durable glass lens that's sealed to keep out fluids, chips, and shavings, so they can be mounted directly inside machines. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. They produce a cool or daylight appearance that highlights white/blue tones, which is good for inspecting. IP67 lights withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they are built tougher than needed for machine environments.

Power supplies, also known as transformers, convert your facility's 120 or 240 AC voltage into 24V DC voltage.

The articulating arm on these lights holds its position better than gooseneck-arm lights, especially around vibration. Mount these lights directly inside machines—they have a heat- and chemical-resistant glass lens that's sealed to keep out fluids, chips, and shavings. They’re rated IP67 to withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they are built tougher than needed for machine environments. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. They produce a cool light appearance that highlights white/blue tones, which is good for inspecting.

Pivot the head to cast a narrow beam of light to exactly where it's needed. Mount these lights directly inside machines—they have a heat- and chemical-resistant glass lens that’s sealed to keep out fluids, chips, and shavings. They’re rated IP67 to withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they are built tougher than needed for machine environments. These lights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They produce a cool light appearance that highlights white/blue tones, which is good for inspecting.

Power supplies, also known as transformers, convert your facility's 120 or 240 AC voltage into 24 DC voltage. They cannot be sold to California or Vermont due to local energy efficiency requirements.

If the power goes out, you’ll find these flashlights right away. Store them in an area that gets a lot of natural or artificial light—they’ll absorb the light and emit it in the dark. All have a nonslip grip.

Style A and C have a magnet to stick onto easily accessible magnetic surfaces, such as machines. Style C are the best choice if you need a task light. The head tilts to point light where you need it, and the bottom is flat so you can stand them up and work hands-free. In addition to a magnet, these flashlights have a clip for securing near your work.

Flashlights with a flood beam cast a uniform spread of light that’s good for close-up tasks and inspection work. Flashlights with a spot beam have a bright center for lighting up long distances. Flashlights with a spot/flood beam emit both types of light at the same time.

Flashlights that meet ANSI/PLATO FL 1 standards have been tested to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

IP08-rated flashlights withstand prolonged submersion, so they’ll still work if you drop them in water.

Light up work even when your visor is up. These headlamps come with three attachments that fit with anything from your hard hat to your baseball cap. A strong magnet connects the light to the attachments, so swap between them in a snap. When you need close-up illumination, detach the light and hold it as a task light.

Rated IP54, these headlamps are sealed against dust and splashing liquids. They’re tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as brightness, battery life, and beam distance. On the high beam, these lamps will illuminate the length of a football field.

Twist the head to adjust from a narrow spotlight to a wide floodlight. These headlamps are rechargeable and include a spare rechargeable battery. If you aren’t near an outlet or you can’t wait for a recharge, they’ll also run on three disposable AAA batteries.

With a slimmer profile than other strip machine lights, these lights fit in tight spots on workspaces and inside machinery because they don’t have a circuit board. Put them on the running boards of trucks and other vehicles to improve visibility without limiting ground clearance. They’re good for indoor and outdoor applications requiring resistance to water, impact, and corrosion because their built-in LEDs are sealed in plastic to keep out fluid, dust, dirt, and debris. Rated IP67, they’re dust tight even with continuous airflow and they withstand submersion in one meter of water for 30 minutes. Their LEDs last longer, are more efficient, and generate less heat than other light technologies. They have a daylight appearance, which highlights white and blue tones and is good for inspecting.

Magnetic-mount lights are useful for quick, temporary installations. Apply the included magnetic tape wherever needed, and then stick the light to the tape.

Similar in function to tubular machine lights, except strip machine lights have a flat lens that directs light downward. These lights are sealed to keep out fluid, chips, and shavings, so they can be mounted directly inside machines. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. They produce a cool or daylight appearance that highlights white/blue tones, which is good for inspecting.

All lights are rated IP67 to withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they're built tougher than needed for machine environments.

Style B lights have a magnetic mounting base for quick, temporary installation, as well as through holes for permanent mounting. They have a tempered glass lens that's more durable than acrylic plastic.