Because these lights are compatible with DeWalt rechargeable batteries, you can keep one type of cordless tool battery on hand. Their head pivots to aim light where it's needed in areas that don't have electrical power service. Hang them by the hook or stand them up for hands-free illumination. To protect the LEDs, their plastic lens resists impact.

Style A have a head that both pivots and rotates, so they’ll point light at any angle. For flexible mounting, they have a hanging hook, belt hook, and kickstand. You can also stick their magnetic back to metal surfaces.

Style C are our brightest option—they have four LEDs instead of one.

Style D have a 360° swiveling hook that locks in place so you can point light where it’s needed. Hang them on pipe up to 2" in diameter.

Note: Battery life depends on the size of your battery.

Power these lights with the same battery as your other cordless tools. They run on a Milwaukee M18 battery (sold separately) to light up work where there’s no outlet. Their head pivots to aim light where you need it, and they’re small enough to easily move from workspace to workspace. Ideal for tough jobsites, their plastic lens resists impact. You can use them outdoors and in other damp areas—rated IP54, they’re sealed against splashing liquid and humidity. They’ll also work in dusty conditions.

Style A have flexible mounting options. They have a hook on top and a hook on the back of the handle that you can rotate for different hanging orientations.

Style C throw focused light similar to a flashlight. They have a hook on the back of the handle.

Note: Battery life depends on the size of your battery.

Splashes and drips are no problem for these lights. They don’t need an outlet, so you can bring them wherever you’re working. With a swivel hook and a magnet, you can attach them where convenient and aim light on your task. IP rated, they’re sealed to keep water from working its way in and causing failure. Their light mimics natural daylight to give you a crisp, clear light that’s good for inspecting.

Style A have magnets at both ends and on the back of the handle. Pop them onto magnetic surfaces or stick the magnetic hook on to hang them where they work best for you. The handle has an octagonal collar, so you can set them on their side without them rolling away.

Style B come with removable mounting attachments: a hook for hanging that also doubles as a kickstand when you fold it down and a magnetic clip for attaching them to most metal surfaces. Use the light on the top as a flashlight when all you need is a narrow beam.

Style C and D have a magnet on the kickstand. You can attach them to a metal surface and adjust the angle of the light. Fold the hook into the back when you’re not using it. Style D can shine like a flashlight when you need to peer into narrow spaces.

Style E have a magnet embedded in the hook. Since the hook folds, you can use it to tilt the light toward your task. Use the light on the end as a flashlight when all you need is a narrow beam. A battery life indicator lets you know when it’s time to charge these lights. They’re tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Hang these lights where you need them on the job site.

Styles A-E come with LEDs that last longer, are more efficient, and generate less heat than other light technologies. They produce a cool light that highlights white/blue tones, which is good for inspecting. The LEDs in Styles A, B, C, and E are built-in, while Style D come with a replaceable LED bulb. All have an impact-resistant plastic lens to protect the LEDs.

Style F are furnished with replaceable fluorescent bulbs. They produce a cool or daylight appearance that highlights white/blue tones, which is good for inspecting. Fluorescent lights last longer and generate less heat than halogen lights. All have an impact-resistant plastic lens to protect the bulb.

Styles H and J are compatible with medium-base screw-in CFL (compact fluorescent), halogen, incandescent, and LED bulbs (sold separately), except 1550K33 is compatible with medium-base screw-in incandescent and LED bulbs. Style H have a steel guard to protect the bulb.

Bulbs that cannot be sold to Canada exceed local regulatory limits on mercury content

Keep excess cords out of your way—the reel locks the cord at any length and retracts it when not in use. All of these lights have a hook for hanging when you need both hands for other work.

Style A are a good choice if you are working close to your light—their wide-angle lens disperses the light. They can also be used like a flashlight by turning on the bulb at the end of the light, which produces a narrow spot beam. Good for inspecting, they have a cool appearance that highlights white and blue tones. An impact-resistant plastic lens protects the LEDs. An outlet at the end of the cord means these lights double as an extension cord for powering tools and other devices.

Styles B and C have a swiveling hook, so you can aim light where you need it. Fold the hook away when not in use. They also have a magnet in back for mounting to metal. Ideal for inspecting, their daylight appearance highlights white and blue tones. A plastic lens resists impact to protect the LEDs. Mount the reel to your wall or ceiling using the included hardware. Style B can double as an extension cord for plugging in a power tool or other device.

Style D have a hook on the top and the bottom, so you can hang the light horizontally or vertically. Fold both hooks away when not in use. You can also mount these lights to metal with the removable magnet in back. Their daylight appearance highlights white and blue tones, so they’re ideal for inspecting. To protect the LEDs, they have an impact-resistant plastic lens. They come with hardware for mounting to your wall or ceiling.

Style E have a zinc-plated steel guard to protect the bulb. Use them with medium-base, screw-in LED bulbs (sold separately). They double as an extension cord—plug a tool or other device into the outlet on the handle. You can mount them to your wall or ceiling with the included hardware.

Style F run on just 6 volts between the cord reel and the light, so they’re safe for wet locations and other areas where 120 volts could be dangerous. Because of this, they comply with OSHA 29 1926.401 for safety in wet locations. They use an incandescent bulb, so they show the full spectrum of colors better than lights with LEDs. That means they’re ideal for dark spaces where color recognition is critical, such as when working with wiring.

Light up damp areas—these lights seal out moisture and humidity. They’ll even work in areas with frequent washdowns. Rated NEMA 4X, they withstand spraying liquid, resist corrosion, and keep out dust. Use them with medium-base, screw-in CFL (compact fluorescent), halogen, incandescent, and LED bulbs (sold separately).

PTFE plastic lenses are impact resistant.

Tempered glass lenses are more durable than plastic lenses. They have a zinc-plated steel guard to protect them.

Hang a string of lights overhead to brighten wet jobsites. IP rated, these lights are sealed to keep out dust and moisture from washdowns, splashes, and sprays, even outdoors. They have multiple heads, so you can light large areas. Daisy chain multiple strings together to cover an even larger area.

Styles A and B have hooks on the top of each light head for hanging.

Use these with portable lights that use screw-in bulbs. They are not for use with insulated, wet-location, or hazardous location portable lights.

These LED lights are rated for environments where hazardous material is present. They have a tempered glass lens to protect the bulb.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

This IP67 rated light withstands temporary submersion in a maximum of one meter of water for up to 30 minutes. It's compact for easy transport to job sites with no electrical power. With a head that adjusts up and down, it floods your job site with light. It has a hook and a magnet for mounting, so you can keep your hands free for other work. This light has built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. It has a durable tempered-glass lens to protect the LEDs.

Note: Battery life is significantly reduced when lights are used at the high-beam setting.

Flood dark, remote jobsites with multiple tiers of light. These cordless lights stack on top of each other to focus a strong beam of light in one direction. The head pivots to aim light where you need it. You can also hang the hooked feet over doors, scaffolding, and other surfaces. With an alloy steel frame and an impact-resistant plastic lens, these lights are built for tough jobsites. Still, they’re lightweight enough to carry around. You can use them outdoors and in other damp locations—rated IP07, they can even handle temporary submersion. A digital display shows you how much charge is left at the brightness level you’re using.