About Tapping Screws
More
Torx Flat Head Screws for Wood
With more points of contact than Phillips-, slotted-, and square-drive screws, you can firmly press these Torx-drive screws into wood without stripping them or damaging the recess—their threads create a tight hold. All are beveled under the head for use in countersunk holes. Made of zinc-plated steel, they resist rusting in wet environments. To prevent splitting, drill a pilot hole slightly smaller than the screw. Length is measured from the top of the head.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Dia. | Ht. | Drive Size | Softwood Drill Bit Size | Hardwood Drill Bit Size | Approximate Threads per Inch | Threading | Min. Thread Lg. | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||||
No. 10 | |||||||||||
3/4" | 0.385" | 0.116" | T20 | 3/32" | 7/64" | 12 | Partially Threaded | 1/2" | 100 | 0000000 | 000000 |
1" | 0.385" | 0.116" | T20 | 3/32" | 7/64" | 12 | Partially Threaded | 3/4" | 100 | 0000000 | 00000 |
2" | 0.385" | 0.116" | T20 | 3/32" | 7/64" | 12 | Partially Threaded | 1 1/2" | 100 | 0000000 | 00000 |
Distortion-Free Screws for Plastic-Wood Composites
Threads change direction to cut into composites and push material back into the hole to prevent distorting the surface around the hole. Also known as trim-head deck screws, these have a small flat head and slender shank to reduce the risk of splitting. They have a Type 17 auger point to penetrate softwood and plastic-wood composite decking material. A Torx drive allows you to apply extra force with less slippage or damage to the recess. Made from 18-8 stainless steel, they have good chemical resistance and are a good choice for ACQ-treated (arsenic-free) lumber. They may be mildly magnetic. Length is measured from the top of the head.
For technical drawings and 3-D models, click on a part number.
Head | ||||||||
---|---|---|---|---|---|---|---|---|
Lg. | Dia. | Ht. | Drive Size | Drill Bit Size | Approximate Threads per Inch | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||
No. 10 | ||||||||
2 3/4" | 0.266" | 0.11" | T20 | 3/32" | 13 | 25 | 000000000 | 000000 |