We will reply to your message within an hour.
More
To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.
Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals.
For quick repairs, these epoxies begin to harden in 6 minutes or less.
Bond most materials without the strong odor of other epoxy adhesives.
Assortments include eight different epoxies in 0.1-oz. packets to handle a variety of small jobs.
Even when used under water, these adhesives maintain their strength.
With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions.
Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds.
Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these epoxies.
Toughened adhesives are blended with rubber particles for better impact resistance than standard acrylics. They form resilient bonds.
No need to mix these acrylics—apply adhesive to one surface and activator to the other, then bring surfaces together to bond.
To keep these adhesives from squeezing out during clamping and give a consistent bond thickness, they're mixed with small glass beads.
Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
With excellent shear strength, these acrylics form bonds at least 25% stronger than standard acrylic structural adhesives.
Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.
With high shear strength and peel strength, these form the strongest bonds of our urethane adhesives.
Also known as super glue, these adhesives bond quickly.
Use these adhesives in applications that are highly sensitive to contaminants.
Mixed with rubber for better impact resistance than standard instant-bond adhesives, these adhesives form strong, resilient bonds.
Form bonds in 5 seconds or less.
Make strong, instant bonds on a variety of materials—but not your skin.
Bond plastics, porous materials, or dirty surfaces.
These thin liquids, also known as super glue, flow into small gaps.
For faster bonding, these adhesives begin to harden in half the time of our other wicking instant-bond adhesives.
Also known as Gorilla Glue, this glue expands to form stronger bonds than other glue.
Bond both soft and hard wood.
In addition to being waterproof, this glue is made of FDA listed materials.
This glue withstands limited exposure to water.
This putty-like glue cures into a pliable rubber. Use it to repair seals and cracks, or mold it into hooks and bumpers.
This general purpose glue tackles a variety of repairs.
Pull off a small piece of putty and stick lightweight objects to a surface.
This glue withstands temperatures up to 500° F.
These small tabs of pressure-sensitive adhesive offer convenient, no-mess bonding.
When heated, these glue sticks melt and quickly begin to harden. Use them to seal packaging and form other low- to medium-strength bonds.
Remaining flexible after curing, these glue sticks accommodate joint movement.
Bond glass and stone to drywall, treated lumber, and subfloors.
Install building materials such as wood and drywall with these general purpose adhesives.
Use these adhesives to bond lumber and plywood.
Bond carpeting, vinyl tile, and other floor coverings to subfloors.
Install vinyl and rubber treads on stairs with this adhesive.
Install foam insulation, drywall, and paneling with these adhesives.
Adhere vinyl and rubber wall bases to wood, drywall, and concrete.
Apply these adhesives on two surfaces, air dry, and then bring together to bond.
Bond porous materials with these low-odor, nonflammable adhesives.
Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to form strong bonds.
Form bonds with twice the strength of our other spray adhesives.
For easy positioning, this adhesive remains tacky for hours. Once items are in place, apply pressure to create a permanent bond.
These spray glues adhere quickly.
These guns use polyurethane hot-melt cartridges for stronger bonds than other hot-melt adhesives.
Made from silicone, these sealants are RTV (room-temperature vulcanizing).
These sealants include a material certificate with traceable lot number, test report, and product shelf life.
Clear enough to read through, these UV-resistant sealants allow optimal light transmission for use with solar cells and fiber optics.
Apply these sealants in cold temperatures, on wet surfaces, and even through running water.
Meeting requirements for semiconductor, biomedical, and electronics clean rooms, these sealants won’t contaminate air and surfaces.
These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.
Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.
Press this adhesive-backed plastic tape into place for an immediate light-duty seal.
The strongest submersible sealants we offer, these combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.
These sealants are marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.
Also known as glazing compounds, use these sealants to install glass in aluminum, steel, and wood framing.
Press this pliable rope into place to hold glass in window frames and seal leaks.
These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.
Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.
Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.
Everything you need to repair cracked, worn, and damaged surfaces—even underwater.
Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces.
The thick consistency of these gasket makers creates a seal right away even before they harden. Press the nozzle to dispense a uniform bead.
Create a seal to get your machine back up and running in just two hours. These gasket makers have a thick consistency that creates a seal right away, even before they harden.
Use cartridges with a standard caulk gun for quick and easy dispensing.
Dispense a uniform bead when you press the nozzle.
These gasket makers combine the ability to withstand temperatures up to 600° F with the flexibility to accommodate movement.