About Tool Steel
More
About Carbon Steel, Alloy Steel, Spring Steel, and Cast Iron
More
Tight-Tolerance Multipurpose 304 Stainless Steel
This material has tighter tolerances than standard 304 stainless steel. From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications. It maintains its corrosion resistance in temperatures up to 1500° F.
Rods are precision ground and straightened, so they’re ready for turning in your lathe.
Steel that meets ASTM or SAE specifications complies with standards for materials.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: See Table
- Hardness: See Table
- Heat Treatment: Annealed (Softened)
- Heat Treatable: No
- Specifications Met: See Table
Tight-Tolerance Easy-to-Machine 303 Stainless Steel
This material has tighter tolerances than standard 303 stainless steel. Widely used for fabricating fittings and fasteners, 303 stainless steel machines quickly without sticking to cutting tools. It maintains its corrosion resistance in temperatures up to 1500° F.
Rods are precision ground and held to a strict straightness tolerance, so they are ready for turning in a lathe.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: 35,000 psi
- Hardness: See Table
- Heat Treatment: Annealed (Softened)
- Heat Treatable: No
- Specifications Met: ASTM A582, SAE AMS5640
Easy-to-Machine 303 Stainless Steel
Widely used for fabricating fittings and fasteners, 303 stainless steel machines quickly without sticking to cutting tools. It maintains its corrosion resistance in temperatures up to 1500° F.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: 25,000 psi
- Hardness:
Inch Sizes: Rockwell B77 (Medium)
Metric Sizes: Rockwell B85 (Medium) - Heat Treatment: Annealed (Softened)
- Heat Treatable: No
- Specifications Met:
Inch Sizes: ASTM A582
Metric Sizes: EN 10088-3
Corrosion-Resistant 316 Stainless Steel
The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications. It maintains its corrosion resistance up to the maximum temperature.
If you don’t see the rod size you’re looking for, please specify a length under additional rod lengths.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength:
Inch Sizes: 30,000 psi
Metric Sizes: 29,000 psi - Hardness:
Inch Sizes: Rockwell B75 (Medium)
Metric Sizes: Rockwell B80 (Medium) - Heat Treatment: Annealed (Softened)
- Heat Treatable: No
- Specifications Met:
Inch Sizes: ASTM A276
Tight-Tolerance Corrosion-Resistant 316 Stainless Steel
This material is precision ground to offer tighter tolerances than standard 316 stainless steel. The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications. It maintains its corrosion resistance in temperatures up to 1500° F.
Rods are held to a strict straightness tolerance, so they’re all set for turning in your lathe.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: 30,000 psi
- Hardness: Rockwell B75 (Medium)
- Heat Treatment: Annealed (Softened)
- Heat Treatable: No
- Specifications Met: ASTM A276, SAE AMS5648
Low-Carbon Steel Rods and Discs
- Yield Strength: See table
- Hardness: See table
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: See table
- Fabrication: See table
- Specifications Met: See table
Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into low-strength fasteners, pins, and axles. You can surface harden this material for added wear resistance. All have been manufactured to meet ASTM standards for quality and performance.
Cold-worked rods and discs have a finished look and quality. The cold-working process gives the steel consistent strength, hardness, and dimensions throughout.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Hardened Undersized High-Speed M2 Tool Steel Rods
- Yield Strength: Not Rated
- Hardness: Rockwell C60 (Very Hard)
These rods, also known as drill blanks, have an undersized diameter for machining your own jobbers'-length drill bits. They're hardened for increased abrasion and impact resistance. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Dia. | Dia. Tolerance | Drill Bit Size | Lg. | Mechanical Finish | Straightness Tolerance | Each | |
| 3mm | -0.0050mm to 0.0000mm | 3 mm | 2 3/4" | Precision Ground | 0.012" per ft. | 00000000 | 00000 |
Tight-Tolerance Multipurpose Oil-Hardening O1 Tool Steel Rods
- Yield Strength: 50,000 psi
- Hardness: Rockwell B90 (Medium)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment:
Inch sizes: Rockwell C65
Metric sizes: Rockwell C62 - Specifications Met: ASTM A681
Ready for turning in a lathe, these rods are precision ground to a tight diameter tolerance. They’re also known as drill rod. Often used for dies, punches, and gauges, O1 tool steel is an oil-hardening material that resists wear and abrasion.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
3 ft. Lg. | |||
|---|---|---|---|
| Dia. | Dia. Tolerance | Mechanical Finish | |
| 3mm | -0.013mm to 0.013mm | Precision Ground | 00000000 |
Ultra-Formable 260 Brass Rods
- Yield Strength:
Inch sizes: Not Rated
Metric sizes: 9,000 psi - Hardness: Not Rated
- Temper: H01 (1/4 Hard)
- Heat Treatable: No
- Specifications Met: ASTM B134
The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.
For technical drawings and 3-D models, click on a part number.
300 mm Lg. | ||||
|---|---|---|---|---|
| Dia., mm | Dia. Tolerance Range, mm | Pkg. Qty. | Pkg. | |
| 3 | -0.051 to 0.051 | 3 | 00000000 | 00000 |
Easy-to-Machine Architectural 385 Brass Rods
- Yield Strength:
Inch sizes: 16,000 psi
Metric sizes: 21,000 psi - Hardness:
Inch sizes: Rockwell B40 (Soft)
Metric sizes: Rockwell B55 (Soft) - Temper:
Inch sizes: M30
Metric sizes: Not Rated - Heat Treatable: No
- Specifications Met:
Inch sizes: ASTM B455
Metric Sizes: European Standard EN 12164
Often called architectural bronze, 385 brass is easy to machine and has excellent formability when heated. It is typically used for handrails, ornamental trim, and hardware, such as hinges and lock bodies.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
1 m Lg. | ||||
|---|---|---|---|---|
| Dia., mm | Dia. Tolerance Range, mm | Straightness Tolerance | Each | |
| 3 | -0.05 | Not Rated | 0000000 | 00000 |