Eliminate tangles—the slippery insulation on this wire won't catch on itself, other wires, or on rough surfaces. It’s also known as hook-up wire.

The shielding in this wire blocks signal interference from nearby equipment and devices. When pulled lengthwise, it extends 40% and then returns to its original length, so it's useful for high-vibration and continuous-motion applications such as robotics. It’s also known as hook-up wire.

Pinch clamps (sold separately) act as ferrules to hold insulation in place in continuous-motion applications. Crimp the pinch points on the clamp to install (crimper not included).

When pulled lengthwise, this wire extends 40% and then returns to its original length, so it's useful for high-vibration and continuous-motion applications such as robotics. It’s also known as hook-up wire.

Pinch clamps (sold separately) act as ferrules to hold insulation in place in continuous-motion applications. Crimp the pinch points on the clamp to install (crimper not included).

Often used in automated applications such as robotics, this wire withstands continuous motion without degrading data or signal transmission.

Wire is a UL recognized component.

Wire gauges 18-28 are UL recognized components up to 150V AC.

A thick insulation protects this wire from high voltages while maintaining flexibility. The insulation also resists moisture. Often used in automated applications such as robotics, it withstands continuous motion without degrading data or signal transmission. It meets UL 94 V-0 for flame retardance. If this wire is exposed to flames, it minimizes how much smoke and halogen it releases.

Also known as magnet wire, this wire is commonly used in motors, transformers, relays, and other high-speed winding applications. It meets NEMA 1000 MW-35C for material quality and -73C for use in sealed motors and material quality. It stays in the position you bend it.

This wire wraps around a post terminal on a circuit board to make an electrical connection, eliminating the need for soldering. It stays in the shape you bend it for a tight wrap around the post. A silver-plated finish provides corrosion resistance and strength. PVDF wire is also known as Kynar wire.

Use a wrap wire tool (sold separately) to make a tighter connection than wrapping by hand. The tool also unwinds wire from the post.

Keep multiple colors of wrap wire on hand to color code connections in circuit boards for easy identification. This wire winds around a post terminal to make a strong electrical connection—no soldering needed. Lightweight and flexible, it stays in the shape you bend it for a tight hold. A silver plating shields the wire from corrosion as well as wear and tear. This wire has PVDF insulation, which resists breaking down from chemicals and melting up to 200° F. Because it’s insulated with PVDF, it’s commonly known as Kynar wire.

All of these assortments come with a wire stripper to cut and strip your wire. Store and organize the wire with the included dispenser box.

For an even tighter connection than wrapping by hand, use a wrap wire tool (sold separately). Thread the wire into the tip, insert the tool over a post terminal, and twist. Alternate between winding and unwinding by reversing the tip, just as you would a screwdriver bit.

This cable can be stretched by about 40% and return to its original length, making it useful for applications where cable is in motion. It's often sewn into garments or used with equipment that must be worn. The stretchable properties give it a long flex life. Vibration and motion won’t degrade signal transmission.

Use unshielded cable in applications where signal interference is not a concern.

Shielded cable has a layer of foil that blocks signal interference from nearby equipment and devices.

Pinch clamps (sold separately) act as ferrules to hold insulation in place in continuous-motion applications. Crimp the pinch points on the clamp to install.

Often used in computers, small electronics, and electronic prototyping, this cable is very flexible with small gauge wire to handle tight curves in narrow spaces. It withstands continuous motion, so it’s also commonly used around heavy vibration and in automated tasks, including robotics. A braid shield blocks interference from nearby equipment.

A thick outer layer of silicone rubber insulation protects this cable from high voltages while remaining ultra flexible. You'll often see this cable used in harsh environments with tight turns, from robotics and aerospace to oil rigging, because it won't break down from chemicals, oil, moisture, or UV light. It stands up to continuous motion without degrading data or signal transmission.

This cable meets UL 94 V-0 for flame retardance. If it is exposed to flames, it minimizes how much smoke and halogen it releases. It also meets clean room standards because it releases minimal particles into the air.

Bend radius is the point to which the cable will bend without being damaged. It is measured from the center of the bend to the edge of the cable. The smaller the measurement, the tighter the bend.

Make quick, secure connections between your development board and your system’s components, such as sensors and actuators. These cords transmit data via I²C communication protocol, supporting up to 100 I²C devices in your system.

Machine-pin plugs and sockets use friction to make temporary connections to breadboards and the headers on development boards.

Qwiic and Grove sockets snap securely into place, making them good for short-term and long-term installations. There is no need to solder wire to your board or device.

Transmit audio, video, and data signals over long distances with minimal signal loss.

Push in RCA and S-video cords to connect.

Often used to connect multiple monitors to a single computer, these cords send video and audio to a display device. Shielding blocks signal interference from nearby equipment and devices.

Audio/video HDMI connectors and cords are rated IP67 when mated.

UL 94 V-0 rating applies to HDMI housing.

Caps (sold separately) protect sockets and maintain the IP67 rating when not in use.

For technical drawings and 3-D models, click on a part number.