This wire meets stringent military specifications for material quality.

Run power over rough surfaces—this wire has thick insulation that stands up to wear and tear.

Even at 480° F—hotter than some industrial ovens—this wire’s insulation won’t melt.

Use this wire in high-voltage applications that require 10,000 volts DC or greater, such as in high-power signs and lasers.

Originally designed to meet the quality standards of the auto industry, this wire withstands high temperatures, flames, and abrasion.

Often found in older vehicles, this fusible link wire protects a circuit in applications where you can’t use a standard fuse.

Use this wire in automated applications that require 14,000 volts A/C or greater. It withstands continuous motion without degrading data or signal transmission.

The EPDM insulation on this wire won’t become brittle or crack from sunlight, humidity, rain, temperature changes, abrasion from dirt and debris, and other rough outdoor conditions.

Rated to 12 volts DC, this cable is often used in low-voltage applications such as battery and vehicle wiring and radios. Also known as GPT cable.

The insulation resists corrosive chemicals and salt water, and the wires in this cable are tin plated for corrosion resistance.

Supply power to submersible pumps in water or oil wells.

The insulation has excellent resistance to oil, so this cable can be used near motors. Often used in automated applications, it withstands continuous motion without degrading data or signal transmission

Connect servocontrollers and servomotors in automated equipment and on assembly lines. This cable withstands continuous motion without degrading data or signal transmission.

Rated for in-wall installation, this cable carries power to wall outlets. Also known as branch circuit wire.

This cable meets TC-ER crush and impact requirements for exposed runs in cable trays, so it can be used without conduit. It sends signal and data to operate, measure, or regulate automated equipment.

Also known as festoon cable, this flat cable fits in confined spaces such as overhead cranes and hoists. It sends signal and data to operate, measure, or regulate automated equipment.

Hardwire these cords to equipment.

Use these cords where ignitable gas and dust may be present. They're CSA certified for Class I, Divisions 1 and 2, Groups B, C, and D; and Class II, Divisions 1 and 2, Groups F and G hazardous environments.

The insulation resists water, oil, and chemicals, so these cords withstand dirty and greasy environments.

Insulated to resist water, oil, and solvents, these cords withstand dirty and greasy environments.

A locking lever on the female socket prevents your device from disconnecting.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.

Change the connection style between an outlet and your equipment.