About Sleeving
More
Hook-and-Loop Wrap-Around Sleeving for Universal Robots
Organize and protect the cables and tubing on your Universal Robots arm without hindering its movement. This sleeving is made for Universal Robots arms, so you don’t need to measure, cut, or customize for a good fit. The hook-and-loop closure makes installation quick, and unlike cable ties, it’s easy to detach and adjust. Cables run through a separate channel, so you can access them without removing the sleeving from your arm. Made from polyurethane, this sleeving is flexible enough for cables and tubing to move easily, and durable enough to withstand continuous movement. It’s also lighter than hose carriers and conduit, so it won’t weigh down your robot arm. Each includes two pieces of sleeving.
| ID | Wd. | Lg. | Wall Thick. | Temperature Range, °F | Features | Cable Opening Wd. | Color | Each | |
Polyurethane Rubber | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For UR3 and UR3e Series Robot Arms | |||||||||
| 2 1/8" 2 5/8" | 3 1/4" 3 1/4" | 10 7/8" 12 3/8" | 0.018" | -60° to 200° | Cable Channel | 1" | Black | 00000000 | 000000 |
For UR5 and UR5e Series Robot Arms | |||||||||
| 3" 3 3/8" | 8" 8" | 13 1/2" 14 3/4" | 0.018" | -60° to 200° | Cable Channel | 1" | Black | 00000000 | 000000 |
For UR10 and UR10e Series Robot Arms | |||||||||
| 3 3/8" 4 1/4" | 14" 14" | 14 7/8" 17 3/4" | 0.018" | -60° to 200° | Cable Channel | 1" | Black | 00000000 | 00000 |
Interference-Shielding Wrap-Around Sleeving
Use this shielded sleeving to protect wire and cable from signal distortion caused by nearby equipment and devices. A sewn-in ground wire dissipates any stored charge. It provides good protection against abrasion. Wrap it around wire and cable without disconnecting them; sleeving has a slit along the entire length. Sleeving with an adhesive strip closure is permanently sealed when the adhesive is applied. Sleeving with foil shielding is for use in stationary applications. Repeated flexing will damage the foil. Polyurethane rubber sleeving provides excellent resistance to solvents.
Flame rated VW-1 sleeving meets requirements for preventing the spread of flames based on a timed test with vertically suspended material.
Per Ft. | ||||||||
|---|---|---|---|---|---|---|---|---|
| ID | Wall Thick. | Temperature Range, °F | Specifications Met | Color | Lengths, ft. | 1-24 | 25-Up | |
Polyurethane Rubber with Foil Shielding | ||||||||
| 3/8" | 1/32" | -65° to 225° | UL Recognized Component, UL 2556 VW-1 | Black | 0000000 | 000000 | 000000 | |
| 1/2" | 1/32" | -65° to 225° | UL Recognized Component, UL 2556 VW-1 | Black | 0000000 | 00000 | 00000 | |
| 1" | 1/32" | -65° to 225° | UL Recognized Component, UL 2556 VW-1 | Black | 0000000 | 00000 | 00000 | |
| 1 1/2" | 1/32" | -65° to 225° | UL Recognized Component, UL 2556 VW-1 | Black | 0000000 | 00000 | 00000 | |
| 2" | 1/32" | -65° to 225° | UL Recognized Component, UL 2556 VW-1 | Black | 0000000 | 00000 | 00000 | |
Continuous-Flex Wrap-Around Sleeving
Often used to protect wire, cable, and hose in robotics and other automated applications, this highly flexible sleeving withstands continuous motion without tearing or fraying. It can even be used over cable and hose carriers for an added layer of protection. This sleeving opens along its entire length, so there’s no need to disconnect lines or use tools for maintenance such as adding or removing cable.
Polyurethane sleeving has a conductive cloth lining that shields against signal interference caused by nearby equipment and devices. A sewn-in ground wire dissipates any stored charge. The adhesive strip closure seals permanently, so you’ll need to replace this sleeving if you open it. This sleeving resists oil and grease.
