A plastic cover fully insulates these splices.

Crimp the barrel twice on each end for an extra-tight grip in high-vibration applications. A plastic cover fully insulates these splices.

When heat is applied, adhesive-lined insulation shrinks and bonds to wires, creating a moisture- and corrosion-resistant seal.

Visually confirm your connection through the inspection window.

Create a water- and corrosion-resistant seal while connecting two different sizes of wire.

Check to make sure you’ve made a secure connection between two different sizes of wire with the inspection window on these splices. When heated, their adhesive-lined insulation shrinks and bonds to wires, creating a water- and corrosion-resistant seal.

Tighten the screws to connect wires.

Make watertight connections for underground applications.

Insert wires and twist on the threaded end caps. The caps lock wires into place, making these splices a good choice for high-vibration applications.

Press down on the clamp to connect wires for quick field installation, no crimping or tools required

With a ring of solder on the inside, these heat-shrink splices create secure, water-resistant connections between wires without the need for a crimping tool.

Snap these splices onto your wire and they’ll pierce the insulation without you having to strip it.

For use with a compression tool, these splices are color-coded to match compression dies.

Compress the barrel twice on each end for an extra-tight grip in high-vibration applications.