We will reply to your message within an hour.
More
Use in noncritical applications, such as fencing, where the strength of a forged clamp is not required. Install clamps so the saddle is on the long (live) end and the U-bolt is on the short (dead) end. They’re also known as wire rope clips.
These clamps must be oriented with the saddle on the long (live) end and the U-bolt on the short (dead) end. They’re also known as wire rope clips.
These clamps have a forged fabrication and are reliable in critical applications. They are not for making slings. These must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end. They’re also known as wire rope clips.
Constructed with a saddle for both the long (live) end and the short (dead) end, these clamps apply equal pressure without crimping or crushing the wire rope, so orientation doesn't matter. Also known as fist grip wire rope clips.
Install these clamps without any specific orientation, slide the nut over the rope and tighten it onto the threaded halves with a torque wrench.
Kits include clamps and thimbles to support a wire rope loop and prevent it from fraying. Clamps must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end.
Make a removable loop without specialty tools for use in noncritical applications, such as fencing. Also known as tiller clamps.
Create a loop by feeding the wire rope through the clamp and tighten the set screw to secure it in place. Loosen the set screw to quickly adjust the loop. Also known as Gripple rope clamps. They are for use in noncritical applications, such as fencing.
A clamp and thimble in one convenient fitting simplifies installation while providing support and fray protection to the wire rope loop. Use a torque wrench to tighten the clamp.
These compression sleeves are designed to meet lifting specifications.
Use these sleeves for non-lifting applications such as tethering, securing, and suspending.
Keep multiple sleeves on hand in a variety of sizes.
These kits include two compression sleeves paired with two thimbles. The thimbles support the wire rope loops and prevent it from fraying.
Also known as heavy-pattern thimbles, these can be used to reinforce the loop of a sling.
Also known as standard-pattern thimbles, these provide better protection against fraying than light duty thimbles.
These thimbles are also known as thin pattern thimbles.
The open-end design leaves more room for connections than other thimbles.
Smooth rounded edges and an endless design prevent snags.
Install these stud-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.
Install these clevis-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.
Install these eye-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.
Install these swivel-hook-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.
Use a new plug when installing a fitting on a different rope.
Place the wire rope and sleeve through a hole in the assembly block and tighten into a vise to hold. Then attach the plug driver on the end of a plug to make hammering in the plug easier.
Add a mounting plate to wire rope without having to fray the rope or use a compression tool.
Add a stud end to wire rope without having to fray the rope or use a compression tool.
Add an eye-end to wire rope without having to fray the rope or use a compression tool.
Add a clevis end to wire rope without having to fray the rope or use a compression tool.
Also known as socket-end swage fittings, install these ball-with-shank-end fittings with a roller swage press for a strong, permanent hold.
Also known as socket-end swage fittings, install these eye-end fittings with a roller swage press for a strong, permanent hold.
Also known as socket-end swage fittings, install these clevis-end fittings with a roller swage press for a strong, permanent hold.
Also known as socket-end swage fittings, install these stud-end fittings with a roller swage press for a strong, permanent hold.
Feed the wire rope into the opening at the bottom of these eye-end fittings and through the body for a quick and simple installation.
Feed the wire rope into the opening at the bottom of these hook-end fittings and through the body for a quick and simple installation.
Feed the wire rope into the opening at the bottom of these clevis-end fittings and through the body for a quick and simple installation.
Also known as open wedge sockets, these end fittings require only a torque wrench to install.
Compress the thin shank wall with a hand tool to attach these light duty stud-end fittings. They are also known as hand swage fittings.
Compress the thin shank wall with a hand tool to attach these light duty eye-end fittings. They are also known as hand swage fittings.
Compress the thin shank wall with a hand tool to attach these light duty mounting-plate-end fittings. They are also known as hand swage fittings.
Compress sleeves with less effort than standard compression tools.
Compress sleeves with more force than hydraulic hand tools.
Attach these clamps by running a wire rope through the jaws to create an attachment point anywhere along the wire rope.
The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces.
Use these turnbuckles in lifting applications with wire rope. Their closed body not only protects threads from damage and debris, but also keeps these turnbuckles slim enough to fit in tight spaces.
For use with wire rope in light duty applications, these turnbuckles have a closed body that protects threads from damage and debris.
Create a wire rope railing, perimeter, or barrier.
Weld these stubs to parts or use them to push objects apart instead of pulling them together.
Tighten these jam nuts against the turnbuckle body to prevent the fitting from loosening.
Pull wire and cable while maintaining tension until the line can be permanently anchored. Use these clamps with stranded bare steel wire and cable.