We will reply to your message within an hour.
More
Kits include clamps and thimbles to support a wire rope loop and prevent it from fraying. Clamps must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end.
These clamps must be oriented with the saddle on the long (live) end and the U-bolt on the short (dead) end. They’re also known as wire rope clips.
These clamps have a forged fabrication and are reliable in critical applications. They are not for making slings. These must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end. They’re also known as wire rope clips.
Constructed with a saddle for both the long (live) end and the short (dead) end, these clamps apply equal pressure without crimping or crushing the wire rope, so orientation doesn't matter. Also known as fist grip wire rope clips.
Install these clamps without any specific orientation, slide the nut over the rope and tighten it onto the threaded halves with a torque wrench.
Use in noncritical applications, such as fencing, where the strength of a forged clamp is not required. Install clamps so the saddle is on the long (live) end and the U-bolt is on the short (dead) end. They’re also known as wire rope clips.
Create a loop by feeding the wire rope through the clamp and tighten the set screw to secure it in place. Loosen the set screw to quickly adjust the loop. Also known as Gripple rope clamps. They are for use in noncritical applications, such as fencing.
Make a removable loop without specialty tools for use in noncritical applications, such as fencing. Also known as tiller clamps.
A clamp and thimble in one convenient fitting simplifies installation while providing support and fray protection to the wire rope loop. Use a torque wrench to tighten the clamp.
These compression sleeves are designed to meet lifting specifications.
Use these sleeves for non-lifting applications such as tethering, securing, and suspending.
These kits include two compression sleeves paired with two thimbles. The thimbles support the wire rope loops and prevent it from fraying.
Keep multiple sleeves on hand in a variety of sizes.
Add a mounting plate to wire rope without having to fray the rope or use a compression tool.
Compress the thin shank wall with a hand tool to attach these light duty mounting-plate-end fittings. They are also known as hand swage fittings.
Secure a ball with shank to a flat surface.
Use these turnbuckles in lifting applications with wire rope. Their closed body not only protects threads from damage and debris, but also keeps these turnbuckles slim enough to fit in tight spaces.
The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces.
Weld these stubs to parts or use them to push objects apart instead of pulling them together.
Create a wire rope railing, perimeter, or barrier.
Tighten these jam nuts against the turnbuckle body to prevent the fitting from loosening.