Wire and Cable Pulling Clamps
Pull wire and cable while maintaining tension until the line can be permanently anchored. Use these clamps with stranded bare steel wire and cable.
Use clamps with serrated jaws in applications where marring can be tolerated.
Use clamps with smooth jaws when marring needs to be kept to a minimum. They are often used on wire and cable conductors.
Clamps with spring-loaded jaws grip the cable before tensioning to aid proper positioning.
Clamps with a latch provide a more secure grip that prevents wire and cable from slipping out of the jaws.
Warning: Do not use as an anchor.
For technical drawings and 3-D models, click on a part number.
| For Cable OD | Cable Guide Lg. | Capacity, lbs. | With Latch | Material | Each | |
Serrated Jaw | ||||||
|---|---|---|---|---|---|---|
| 0.06"-0.25" | 1 9/16" | 2,500 | No | Steel | 000000 | 000000 |
| 0.13"-0.5" | 2 1/8" | 5,000 | No | Steel | 000000 | 000000 |
| 0.13"-0.5" | 2 1/8" | 5,000 | Yes | Steel | 0000000 | 000000 |
Smooth Jaw | ||||||
| 0.31"-0.53" | 5" | 4,500 | No | Steel | 0000000 | 000000 |
Spring-Loaded Jaw | ||||||
| 0.08"-0.2" | 3" | 1,500 | No | Steel | 000000 | 000000 |
| 0.18"-0.6" | 4 1/8" | 5,000 | No | Steel | 0000000 | 000000 |
| 0.22"-0.55" | 5" | 8,000 | No | Steel | 000000 | 000000 |
Double V Jaw | ||||||
| 0.12"-0.37" | 4 3/8" | 4,500 | No | Steel | 0000000 | 000000 |
| 0.31"-0.62" | 7 3/8" | 15,000 | No | Steel | 000000 | 000000 |
Wire Rope Pulling Clamps
Attach these clamps by running a wire rope through the jaws to create an attachment point anywhere along the wire rope. The eye is often used with a ratchet puller.
For technical drawings and 3-D models, click on a part number.