We will reply to your message within an hour.
Internal mounting bosses enable you to attach panels or DIN rail inside the enclosures using self-tapping screws. Made of polycarbonate, these nonconductive enclosures resist denting, chipping, and cracking.
Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components. Enclosures are made of nonconductive polycarbonate that resists denting, chipping, and cracking.
Aluminum enclosures are a lightweight yet durable alternative to stainless steel.
These enclosures have thicker walls than standard aluminum enclosures, but are still a lightweight yet durable alternative to stainless steel.
Stainless steel enclosures are more corrosion resistant than aluminum for use in environments with corrosive liquids.
PVC enclosures are nonconductive and chemical resistant, withstanding solvents, alkalies, and acids.
Fiberglass enclosures resist denting better than metal and are more UV resistant than polycarbonate enclosures. They are nonconductive.
With a hygienic design, these enclosures minimize spots where food, debris, and water could collect after washdowns. Use them to house and mount switches, buttons, and other components in sanitary environments.
Mounting feet make attachment to machines and walls hassle-free.
Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components. These enclosures have a clear cover, so you can inspect components without opening the enclosure.
Made of polycarbonate, these enclosures resist denting, chipping, and cracking.
Fiberglass enclosures are stronger than polycarbonate enclosures and nonconductive.
View all sides of your installed components.
Mounting feet make attachment to machines and walls hassle-free. These enclosures are small and lightweight for use with sensors, switches, testing devices, and circuit boards.
Control access to these enclosures with a key-operated lock.
Holes in the cover allow easy installation of push buttons, switches, and indicating lights.
Made of polycarbonate, these enclosures resist denting, chipping, and cracking better than stainless steel enclosures.
Protect electronics from washdowns in food plants and other sanitary environments. These enclosures have standard-size push-button holes, saving you the effort of measuring and cutting holes yourself. A shroud hangs over the holes to guard buttons from damage and accidental pushing.
Protect electronics from washdowns in food plants and other sanitary environments. These enclosures have standard-size push-button holes, saving you the effort of measuring and cutting holes yourself.
Protect electronics from washdowns in food plants and other sanitary environments. These enclosures mount directly into walls to protect wiring and reduce the surface area that needs to be cleaned. Standard-size push-button holes are already installed, saving you the effort of measuring and cutting holes yourself.
Made of fiberglass, these enclosures are lightweight and won’t rust, but still shield push-button controls from water, dirt, and oil.
House electrical components in these general purpose enclosures.
Small and lightweight, these enclosures are used with sensors, switches, and testing devices.
These enclosures withstand temperatures up to 475° F.
These enclosures allow you to inspect your electronics without opening the cover.
Keep electronics safe from harmful contact with hands and tools while still allowing air and moisture to enter.
These enclosures have internal slots to hold circuit boards in place.
With internal slots and external fins, these enclosures hold circuit boards securely and dissipate heat to keep electronics from overheating.
Choose a body and two matching end caps to make your own dust-tight or watertight enclosure.
Made of aluminum, these enclosures resist corrosion from rain, sleet, and snow. While not as corrosion resistant as stainless steel, aluminum is lighter for better mobility, and also easier to machine for custom mounting.
Mounted horizontally, such as on machinery or rooftops, these enclosures protect wiring and other electrical components from rain, snow, and ice thanks to their overhanging top.
With an overhanging top and a NEMA 3RX rating, these enclosures guard electronics from snow, rain, and sleet as well as dirt and light splashing.
Keep components safe from rain, snow, and ice. These enclosures are rated NEMA 3R for protection from dirt, falling liquids, and light splashing.
Fans built in to these enclosures keep electronics at the temperature you set, and the filtered intake and exhaust let cool air flow through the enclosure without letting water and contaminants in.
These enclosures are rated NEMA 4 for protection from dirt and washdowns.
No need to cut your own holes—these enclosures already have them to make installing push-buttons, switches, and indicating lights quick and easy.
With standard-size, evenly spaced, aligned push-button holes, these washdown enclosures save you the time and effort of cutting those holes yourself.
Inspect components without opening the cover.
Lighter than stainless steel yet durable, these aluminum enclosures protect electronics from frequent washdowns and withstand periodic submersion in water.
Fasten these enclosures to machine control panels or walls without exposing the contents to wet and oily environments.
Attach these enclosures to machine panels and walls by their mounting feet—no need to open the cover and expose sensors, switches, and other electronics in wet locations. Made of aluminum, they’re lighter in weight than stainless steel yet resist rusting from water.
Install these enclosures on control panels and walls and inspect what’s inside without exposing their contents in wet and outdoor locations.
Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components.
Able to withstand periodic submersion in water, these enclosures offer our highest level of protection from liquids. They’re made of fiberglass to resist impact and corrosion from solvents, alkalis, and mild acids.
Made of nonconductive polycarbonate, these enclosures withstand prolonged submersion in water while protecting electronics from dents, chips, and cracks.
Made of nonconductive polycarbonate, these enclosures withstand prolonged submersion in water while protecting electronics from dents, chips, and cracks. A clear cover lets you monitor the inside without opening them.
Check on the contents inside these enclosures from every angle without opening them in wet environments.
Mount these enclosures directly to machine control panels in wet environments and view the contents without opening them.
Two separate chambers allow you to access wiring connections in the lower section without disturbing components that you install in the upper section.
These enclosures are rated NEMA 13 for indoor protection from dirt and oil/coolant spraying.
Holes in the cover of these enclosures allow easy installation of push buttons, switches, and indicating lights.
Make your push buttons, switches, and indicating lights more visible and ergonomic to use. Enclosures mount on either of two sides, creating a 30° or 60° slanted surface.
Bury these enclosures in the ground or in concrete. They withstand freeze/thaw conditions and have an open bottom for water drainage.
Suitable for installing in the ground or for use in wet environments, these direct burial enclosures are rated NEMA 6P for protection from dirt, washdowns, corrosion, and water submersion.
House emergency stop buttons, life safety equipment, and other devices that need to be seen with these brightly colored enclosures, which are easy to spot even in high-dust areas.
These enclosures reduce electromagnetic interference (EMI) and radio frequency interference (RFI), which can cause electrical problems like flickering monitors, interrupted data signals, and unwanted radio noise.
UL and C-UL classified, these enclosures safely house push-button controls and electronics where there’s explosive dust and gas.
For use in hazardous locations, these enclosures are rated NEMA 7 and 9 and meet UL Class I, Divisions 1 and 2, Groups B, C, and D; Class II, Divisions 1 and 2, Groups E, F, and G; and Class III, Divisions 1 and 2.
Protect keypads, push-buttons, and other handheld controls with these round enclosures that are more comfortable to hold than square enclosures.
Often used to house emergency-stop buttons, switches, and lights, these bright yellow enclosures are easy to spot, even in dimly lit areas. All have standard-size push-button holes to save time—no need to measure and cut your own holes.
Create battery-powered, hand-held devices such as card and signal readers—these enclosures have a clear cover for checking screens and status lights inside.
The unique shape of these enclosures provides a handle to hold scanners, detectors, and remote switches.
Protect tablet computers, touch displays, and readouts in these specially sized enclosures. They are rated IP65 for protection from spraying water.
A 9-volt battery fits inside a compartment in these enclosures to power testing devices and other hand-held instruments.
Use these open boxes with adhesive for electronics (also known as potting compound) to encase electronic assemblies and protect them from vibration, tampering, moisture, and corrosives.
For use in enclosures and panels where components require battery power, these enclosures have contacts for AA and 9-volt batteries.
Create a human-machine interface that’s designed to attach to a suspension arm, so you can move your HMI around.
Build out human-machine interfaces by installing buttons, switches, gauges, and other components to monitor and control machinery.
These enclosures shield electrical components from water, so they’re safe to install onto DIN rail in wet and washdown environments.
Snap these enclosures onto 35 mm DIN rail and lock them in place.
Rated NEMA 12 for protection from dirt and oil/coolant dripping.
These freestanding enclosures have a gasketed door with clamps to ensure a watertight seal. They are rated NEMA 4 and 13 for protection from dirt, washdowns, and oil/coolant spraying.
Keep enclosures locked until the power is cut. A multipoint latch connects to a flange-mount disconnect switch (not included) to hold the door closed, preventing potential electrical shock.
Protect monitors and televisions from environmental damage with these enclosures.
Knockouts allow you to modify these boxes to fit your application.
Close off unused switches.
Add depth to your switch box.
Close off unused outlets.
These boxes come ready to use with receptacles and/or light switches installed.
Add depth to your outlet box.
Add depth to octagonal outlet boxes.
Mount these boxes to the outside of an enclosure to access a programmable logic controller or other networked device without opening the enclosure.
With built-in threaded connections, these boxes allow you to attach conduit without using fittings.
Mount these boxes on the surface of your wall in areas where you can't create a recess.
Designed for commercial use, these heavy duty boxes have thick, rigid walls.
These boxes have an open back to accommodate extra-deep low-voltage devices.
Use the built-in connections to attach conduit without using fittings.
These boxes come ready to use with receptacles installed.
Build your own outlet box or replace a damaged box.
Exposure to rain, snow, and wet conditions won't damage these corrosion-resistant boxes.
Keep the cover closed during operation to completely shield the outlet and plug from rain, snow, and wet conditions.
Add depth to your weatherproof outlet box.
These corrosion-resistant covers can withstand rain, snow, and wet conditions without being damaged.
These corrosion-resistant boxes are built to withstand exposure to rain, snow, and wet conditions.
Rain, snow, and wet conditions won't damage these corrosion-resistant covers.
These cabinets accommodate up to 3,200 lbs. of equipment and have larger interiors than standard electronics cabinets.
Mount servers, automation controls, and computers in these open racks, they make it easy to organize and swap out components. Less bulky than electronics cabinets, you can line up these racks to maximize limited storage space. All are compatible with standard 19" wide components.
House and organize up to 800 lbs. of components such as servers, automation controls, and computers. All are compatible with standard 19" wide components.
Protect wire and cable from dust, dirt, and oil/coolant dripping—this raceway is rated NEMA 12.
With a top that overhangs the cover, this raceway keeps out rain. It is rated NEMA 3R for protection from liquids and light splashing.
Gaskets on the covers and at connection points protect against dust as well as seeping oil and coolant.
This raceway system is also known as wireway and wire trough.
With more than one channel, this raceway allows you to separate power and data wiring to prevent signal interference.
In areas exposed to washdowns, chemicals, and corrosion, install this stainless steel raceway system that has gaskets at the connection points.
Route power, data, and control cable rated up to 600 volts AC/DC.
Insert and remove cable at any point along the length of this open-top, hook-shaped raceway.
Surface mount with the adhesive back to route low-voltage data and control cable where you can't get inside walls.
The triangular shape fits into corners.
More economical than stainless steel, choose these baskets when corrosion is not a concern.
Made from sheet metal with stamped holes, these baskets are more rigid than wire mesh.
Baskets are wire mesh.
Create a basket to meet your exact size specifications.
Easily move these large containers where they're needed, then collapse and stack them to save valuable storage space.
Collapse and stack containers when not in use to save valuable storage space.
Compact in size, these guards can be mounted directly to a machine or workbench. Panels are framed in aluminum T-slotted extrusions to provide multiple points of attachment for other components.
Framed in aluminum T-slotted extrusions, these customizable machine guards provide multiple points of attachment for other components and structures.
Combine posts, panels, and doors to create a barrier around equipment.
These panels lift on and off their posts in seconds, so you can protect machinery while providing access for maintenance.
Inspect the terminal block and wiring without opening the cover.
Save time when wiring connections in a junction box; these blocks come already installed in an enclosure.
Create a permanent outlet system without opening walls. These outlet strips mount to a wall with clips and hardwire to an existing electrical system.
Put overhead outlets in arm’s reach.
For use with washdown receptacles, these outlet boxes withstand corrosive and washdown environments.
These lightweight, portable traps safely capture a variety of animals. A spring-loaded door allows animals to enter but not leave until you release them.
Stand panels up to create enclosures without sinking posts into the ground.
Padlock these cages to limit access to equipment and supplies.
These cages are chrome plated for corrosion resistance and meet NSF/ANSI 2 standards for food equipment.
Mesh construction provides visibility and air circulation. The hinged lid and drop-front gate allow quick access to large equipment.
These cabinets are made of steel mesh for air circulation and visibility.
These cabinets are more corrosion resistant than steel.
The doors of these cabinets are made of steel mesh for air circulation and visibility.
Mount electrical components along your strut channel to bring power to new locations.