A gasket helps keep dust and water from washdowns from entering through the latch. This helps you maintain your sealed enclosure's IP or NEMA rating. It’s harder to snag straps and other items on these wing-handle latches than on T- or L-handle latches. They have a cam that rotates to secure your enclosure.

These latches have one or more cams that each have a fixed latching distance. Since you won’t have to adjust the cam into position, these are faster to install than those with an adjustable latching distance.

Stainless steel and plastic latches are more corrosion resistant than zinc latches. They can be used in areas that are constantly exposed to moisture. The plastic latches are also nonconductive and lighter in weight. However, they’re easier to drill into or tamper with than the metal latches.

For technical drawings and 3-D models, click on a part number.

Install these latches on enclosure doors with smaller-than-standard diameter through holes. All have a wing handle that makes it harder to snag straps and other items on them than on T- or L-handle latches. Also known as compression cam latches, these create a tighter hold than a traditional cam latch, making them useful for doors that have a seal. Turn the head a quarter turn to latch, then turn it another quarter turn to create compression and minimize rattling from vibration.

These latches help keep a sealed enclosure's contents safe from dust and water damage. This helps you maintain your sealed enclosure's IP or NEMA rating. All include a cam with an adjustable latching distance. They handle a wide range of latching distances, so they’re best for tasks when precise distances are unknown.

For latches with an offset cam, adjust the position of the cam before you begin to install them.

For latches with a screw cam, you can easily tighten the screw to adjust the latching distance and tension over time.

Use stainless steel latches in areas that are constantly exposed to moisture since they resist corrosion better than zinc latches.

For technical drawings and 3-D models, click on a part number.

Install these latches on cabinet doors and file drawers with smaller-than-standard diameter through holes. The wing handle makes it harder for clothing and straps to snag on them than cam latches with a T- or L-handle. They have a cam that rotates to lock your enclosure. All come with a straight cam and a reversible offset cam to accommodate different latching distances.

For technical drawings and 3-D models, click on a part number.

Install these latches on enclosure doors with smaller-than-standard diameter through holes. A gasket helps keep dust and low-pressure washdowns from entering through the latch. This helps you maintain your sealed enclosure's IP or NEMA rating. It’s harder to snag straps and other items on these wing-handle latches than on T- or L-handle latches. Also known as quarter-turn latches, all have an arm that rotates 90° to secure your enclosure.

These latches include multiple cams, so you can change their fixed latching distance. Since you won’t have to adjust the cams into position, these are faster to install than those with an adjustable latching distance.

For technical drawings and 3-D models, click on a part number.

It’s harder to snag straps and other items on these wing-handle locks than on T- or L-handle locks. Also known as quarter-turn locks, all have an arm that rotates 90° to secure your enclosure. Choose them if you need several locks that open with the same key.

These locks include multiple cams, so you can change their fixed latching distance. Since you won’t have to adjust the cams into position, these locks are faster to install than those with an adjustable latching distance. All keep your sealed enclosure's contents safe from dust and water damage—they help maintain an enclosure's IP rating for low-pressure washdowns.

Use stainless steel locks in areas that are constantly exposed to moisture since they resist corrosion better than zinc locks.

For technical drawings and 3-D models, click on a part number.

Install these locks on enclosure doors with smaller-than-standard diameter through holes. It’s harder to snag straps and other items on these wing-handle locks than on T- or L-handle locks. Also known as quarter-turn locks, all have an arm that rotates 90° to secure your enclosure. Choose them if you need several locks that open with the same key.

These locks include multiple cams, so you can change their fixed latching distance. Since you won’t have to adjust the cams into position, these locks are faster to install than those with an adjustable latching distance.

For technical drawings and 3-D models, click on a part number.

Wire these locks to a card reader, manual release button, or other access system to remotely open an enclosure door. These locks have a switch that opens the lock when it receives power from your access system. You can also send a signal to a light, alarm, or other device to let you know when the lock is open or closed. Closing the door resets the switch. In case of an emergency, manually open these locks with a key. Choose them if you need several locks that open with the same key.

These locks secure your enclosure just like a traditional cam lock—an arm rotates 90° to pin your enclosure shut. This type of lock is commonly called a quarter-turn lock. They include multiple cams, so you can change their latching distance. A wing handle makes it harder to snag straps and other items on these locks than T- and L-handle locks.

The locks help keep your sealed enclosure's contents safe from dust and water damage—they help maintain your enclosure's IP65 rating for low-pressure washdowns. A stainless steel shutter blocks rain, snow, and dirt from entering the lock cylinder, which can cause internal damage.

For technical drawings and 3-D models, click on a part number.

Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal. Turn the head a quarter turn to lock, then turn it another quarter turn to create compression and minimize rattling from vibration. All keep your sealed enclosure's contents safe from dust and water damage—they help maintain an enclosure's IP or NEMA rating for low-pressure washdowns. It’s harder to snag straps and other items on these wing-handle locks than on T- or L-handle locks. Choose them if you need several locks that open with the same key.

Locks with a fixed latching distance are best when you know the precise distance you need. Since you won’t have to adjust the cam into position, these are faster to install than those with an adjustable latching distance. All include multiple cams, so you can change the fixed latching distance.

Locks with an adjustable latching distance handle a wide range of latching distances, so they’re best for tasks when precise distances are unknown. Adjust the position of the cam before you begin to install them. They project further into the enclosure than those with a fixed latching distance.

Keys are sold separately.

For technical drawings and 3-D models, click on a part number.

Install these locks on enclosure doors with smaller-than-standard diameter through holes. It’s harder to snag straps and other items on these wing-handle locks than on T- or L-handle locks. Also known as quarter-turn locks, all have an arm that rotates 90° to secure your enclosure. Choose them if you need locks that each open with a different key.

These locks include multiple cams, so you can change their fixed latching distance. Since you won’t have to adjust the cams into position, these locks are faster to install than those with an adjustable latching distance.

For technical drawings and 3-D models, click on a part number.

It’s harder to snag straps and other items on these wing-handle locks than on T- or L-handle locks. Also known as quarter-turn locks, all have an arm that rotates 90° to secure your enclosure. Choose them if you need locks that each open with a different key.

These locks include multiple cams, so you can change their fixed latching distance. Since you won’t have to adjust the cams into position, these locks are faster to install than those with an adjustable latching distance. All keep your sealed enclosure's contents safe from dust and water damage—they help maintain an enclosure's IP rating for low-pressure washdowns.

Use stainless steel locks in areas that are constantly exposed to moisture since they resist corrosion better than zinc locks.

For technical drawings and 3-D models, click on a part number.

A gasket helps keep dust and water from washdowns or brief submersions from entering through the latch. This helps you maintain your sealed enclosure's IP or NEMA rating. It’s harder to snag straps and other items on these wing-handle latches than on T- or L-handle latches. They have a cam that rotates to secure your enclosure.

These latches include multiple cams, so you can change their fixed latching distance. Since you won’t have to adjust the cams into position, these latches are faster to install than those with an adjustable latching distance.

Use stainless steel latches in areas that are constantly exposed to moisture since they resist corrosion better than zinc latches.

For technical drawings and 3-D models, click on a part number.