With alternating cloth and nylon mesh abrasive flaps, these wheels are more flexible and produce finer finishes than all-cloth flap sanding wheels.

With alternating cloth and nylon mesh abrasive flaps, these wheels are more flexible and produce finer finishes than all-cloth flap wheels.

Get twice the life over standard nylon mesh cushioned discs—the flexible mesh in these discs is embedded with a premium form of aluminum oxide that aggressively removes material from steel and wood.

Holes in the disc let you see the surface you’re sanding.

Change your discs less often—the zirconia alumina grit on these discs continually fractures to produce new, sharp cutting edges.

A coating prevents dust and debris from building up on the abrasive surface.

The ceramic alumina abrasive on these discs is sharp and dense enough to shape hard metals such as stainless steel, nickel, and cast iron without dulling quickly.

The premium abrasive stays sharp longer.

A coating prevents dust and debris from building up on the abrasive surface.

The flaps have an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.

Set at an angle and widely spaced, the flaps reach into corners.

Overlapping abrasive flaps bonded to a backing plate provide consistent material removal and even finishes.

These discs have a harder abrasive than standard flap sanding discs.

A heavy duty backing plate provides more support than standard discs for heavy material removal.

Replace your sanding discs less often—the backing plate on these discs can be trimmed off as the abrasive flaps wear down, allowing you to use more of the disc.

These discs have a harder abrasive than standard flap sanding discs for corners.

The flaps wrap around the outer edge of these discs to sand welds at right angles.

With more flaps than standard discs, these last 30-40% longer.

Made of phosphorus bronze that is Factory Mutual approved, these brushes inhibit sparking and are nonmagnetic and corrosion resistant.

Made of phosphorus bronze that is Factory Mutual approved, these brushes inhibit sparking and are nonmagnetic and corrosion resistant.

Bristles are partially twisted in alternating directions, which prevents them from separating.

A mounting nut on each side of the arbor lets you use both sides of the brush.