These lights fit into ceiling cutouts.

Mount these fixtures where you need light but don't have an electrical connection. They automatically turn on when movement is detected and off when an area is unoccupied.

With a lower profile than other bay lights, linear bay lights mount closer to ceilings, providing more room for racks or shelving.

Also known as pigtail holders. Temporarily wire these sockets to provide light during construction.

Also known as jelly jar lights. These fixtures have a guard that protects the lens from breaking.

A sealed lens keeps moisture out to protect these lights against washdowns.

Mount these lights flush with ceilings in wet locations—all are sealed to keep out humidity and dripping, splashing, and falling liquids. Unlike recessed can lights, which require a separate housing, these fit directly into a cutout in your ceiling and are held in place by springs.

Power these lights with the same battery as your other cordless tools. They run on a Milwaukee M18 battery to light up work where there’s no outlet.

From pipes to pallet racks to control panels—these lights clamp onto almost anything and swivel to direct light just where you need it.

Light up damp areas—these lights seal out moisture and humidity. They’ll even work in areas with frequent washdowns. Rated NEMA 4X, they withstand spraying liquid, resist corrosion, and keep out dust.

Hang a string of lights overhead to brighten wet jobsites. IP rated, these lights are sealed to keep out dust and moisture from washdowns, splashes, and sprays, even outdoors.

Safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, liquids, and dust, these lights are rated NEC Class I, Class II, and Zone 1.

Bring light to remote areas with the DeWalt rechargeable battery that's already in your toolkit.

Compact and easy to carry, these ETL listed lights stand up to dripping, splashing, and falling liquids. The head adjusts up and down to direct light where it's needed.

Rated IP65, these lights are sealed to protect against light washdowns from a garden hose. They have a height-adjustable stand and light heads that pivot up and down to direct light where it's needed.

Brighten remote spaces with the DeWalt rechargeable battery that’s already in your toolkit. These floodlights extend up to 7 ft., and the light head turns at any angle to aim light where it’s needed.

Similar in function to tubular machine lights, except strip machine lights have a flat lens that directs light downward.

Just like traditional tubular lights that illuminate your machine with a bright white light, these lights can also be programmed to switch over to a red or green light for communicating machine status.

Mount these lights into a recessed opening on your machine—they sit flush against the surface for a streamlined appearance.

Clip these little flashlights to a baseball cap or a surface to light up your work.

Shine light into hard-to-reach spaces with these flexible-arm flashlights.

The smooth stainless steel surface allows for easy cleaning.

Tilt the head on these flashlights to aim light exactly where it's needed. They have a flat bottom, so you can work hands-free without them rolling away.

If the power goes out, you’ll find these flashlights right away.

Small enough to fit in your shirt pocket, these penlights safely light up work in explosion-prone areas. They’re rated for areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids.

Shine light into hard-to-reach spaces—these flashlights have a flexible arm to see around tight corners and in crevices. They’re rated for use in environments where flammable gases, vapors, and liquids are present.

All of these flashlights stand up to wet environments.

Safe for use in environments where hazardous material is present.

Clip these headlamps right into a mount on your tactical or rescue helmet.

Light up work while staying visible in high-risk areas. These headlamps have LEDs on the head band so forklift and truck drivers can see you.

The articulating arm on these lights holds its position better than gooseneck-arm lights, especially around vibration.

Shine light on machinery and through the sight glass on tanks to inspect food, brewery, chemical, pharmaceutical, and bio-tech processing lines.

Mount these lights near entry doors, loading areas, and driveways to cast an even glow of light.

Illuminate outdoor areas and objects such as parking lots, flag poles, and billboards.

Also known as wall packs, these lights mount to exterior walls and ceilings.

Hardwire these lights to a power source.

These lights automatically turn on when movement is detected and off when an area is unoccupied.

Rated for use in damp locations, these lights withstand humidity and moisture.

Rated NEMA 4X, these lights are protected from corrosion and washdowns.

These lights are rated IP69K to withstand high-pressure washdowns, such as those in food and beverage applications.

These lights are UL listed for environments where fuels, solvents, acetylene, and other hazardous substances may be present.

The pad below the base absorbs shock and vibration.

These lights cycle through three different flashing patterns.

Place these lights in full sun and their batteries charge during daylight hours. Lights automatically switch on at dusk and off at dawn.

Easier to spot than other strobe lights, these lights emit bursts of multiple flashes.

A series of four flashes per cycle makes these lights more visible than other strobe lights.

Set these portable lights wherever you need a signal light—they don't need to be wired or plugged in.

These lights can switch between continuous, flashing, or revolving.

These lights have lenses that snap in and out, so you can easily swap colors or change their position in the stack.

Design a stack light with your choice of light pattern and color. Start with a base, then add up to five modules total—twist and lock them together.

Mount these lights horizontally or vertically in places where a tower will not fit.

These lights emit three colors from a single lens and can be mounted in tight spaces where a tower will not fit.

These lights have LED bulbs for years of maintenance-free operation and can be wired as either continuous or flashing.

Use a computer to program colors, lighting patterns, and sounds to communicate a variety of status conditions, material levels, and cycle times—these stack lights have 21 colors and 11 sounds.