Make welds quickly with this fast-melting wire.

ER70S-7 wire is good for general purpose applications.

For technical drawings and 3-D models, click on a part number.

Join stainless steel with this welding wire.

ER308L wire is for 304 and 304L stainless steel. It creates welds that hold even in cryogenic temperatures.

E308LT0-3 wire is for 301, 302, 304, and 308 stainless steel. It creates welds that hold even in cryogenic temperatures. It has a flux core.

ER316L wire is for 316 and 316L stainless steel.

For technical drawings and 3-D models, click on a part number.

Join different metals, such as cast iron, carbon steels, copper, bronze, and copper-nickel alloys. This ERCuAL-A2 wire is often used to repair high-wear and corrosion-resistant surfaces, such as those found in bearings.

For technical drawings and 3-D models, click on a part number.

Join copper, brass, or bronze.

ERCuNiAI is often used to weld cast and wrought 630 bronze to repair valves, piping systems, and ship parts in the marine and oil industries.

RcuAI-E has a flux core. It is often used to weld 630 bronze to repair valves, piping systems, intake screens, and ship parts in the marine and oil industries.

ERCuAI-A3 is often used to weld AMPCO 18 bronze in steel mill support shafts and high strength bearings.

For technical drawings and 3-D models, click on a part number.

Weld stainless steel with these rods.

ER308L rods are for 304 stainless steel. They create welds that hold even in cryogenic temperatures.

ER308LSi rods are for 304 stainless steel. They have a higher silicon content than ER308L rods, so they flow more easily when melted and fill in more of the space between the two pieces of your weld. They’re also better where appearance matters because their welds are smoother.

ER309L rods join different types of stainless steel. They’re also for use with steel.

ER309LSi rods are for 309 stainless steel. They have a higher silicon content than ER309L rods, so they flow more easily when melted and fill in more of the space between the two pieces of your weld. They’re also better where appearance matters because their welds are smoother.

ER316L rods are for 316 and 316L stainless steel.

ER316LSi rods are for 316 stainless steel. They have a higher silicon content than ER316L rods, so they flow more easily when melted and fill in more of the space between the two pieces of your weld. They’re also better where appearance matters because their welds are smoother.

ER630 rods are for 17-4 PH stainless steel.

For technical drawings and 3-D models, click on a part number.

Weld steel together with these rods.

ER70S-2 rods are good for welding over rust and mill scale. They’re made from a blend that helps remove contaminants and imperfections from the weld pool.

ER70S-3 rods are good for welding carbon steel in general fabrication applications. They have a low silicon content, so you can powder coat your welds.

ER70S-6 rods are good for welding dirty, oily, and rusty steel. You can also use them to join misaligned pieces together. They create X-ray quality welds without air pockets for a smoother and more uniform welding bead than standard welding rods. Their high silicon content allows them to flow easily when melted, so they spread out to fill in the space between two pieces of your weld before hardening.

For technical drawings and 3-D models, click on a part number.

These rods create stronger welds than standard TIG welding rods for steel.

ER80S-D2 rods create 15% stronger welds on steel than standard welding rods for steel. You can use them in applications requiring X-ray quality welds, such as in pressure tanks, gas pipes, and heat exchangers.

ER110S-1 rods create 30% stronger welds on steel than standard welding rods for steel. They can be welded in temperatures down to -75° F.

ER120S-1 rods create 40% stronger welds that also resist more impact than welds made with ER80S-D2 and ER110S-1 rods. They’re often used in lifting and handling machines.

For technical drawings and 3-D models, click on a part number.

Make welds quickly with these fast-melting rods. They’re good for general purpose applications.

For technical drawings and 3-D models, click on a part number.

Join copper, copper-silicon, and copper-zinc to themselves and to steel. These rods are also good for welding uncoated or galvanized steel sheets.

For technical drawings and 3-D models, click on a part number.

Weld different steels together, such as steel and stainless steel. These rods also work with high-strength steel alloys.

For technical drawings and 3-D models, click on a part number.

Often used in the aircraft and petrochemical industries, these welding rods join titanium alloys. They can weld in high-temperature applications that require chemical resistance.

For technical drawings and 3-D models, click on a part number.

Often used to repair pipe, these rods join nickel alloys to themselves and to stainless steel and steel.

ERNiCrMo-4 rods resist corrosion, cracking, and pitting better than ERNiCr-3 rods because they have a higher molybdenum content.

For technical drawings and 3-D models, click on a part number.