Made of 85% pure nickel, these electrodes join cast iron to itself, and to mild steel and stainless steel.

Weld nickel with these electrodes.

Use these ERCuAl-A2 rods to join different metals, such as cast iron, steel, stainless steel, copper, and bronze.

Often used to repair pipe, these rods join nickel alloys to themselves and to stainless steel and steel.

A two-part alternative to standard electrodes, these electrodes reduce waste since you can reuse the shank.

Use these brazing alloys with a variety of metals.

Create stronger bonds than standard brazing alloys.

Use these alloys on metal subject to corrosion.

To fill in large gaps, these BAg-2 alloys melt into a thicker liquid than standard brazing alloys.

Use this flux with silver and copper-based brazing alloys to clean and prepare surfaces.

The five flux cores allow fast soldering that uses less solder and transmits less heat to the joint. Rosin flux is quick acting with strong cleaning action but leaves residue that requires flux remover.

The five flux cores in this solder allow fast soldering that uses solder efficiently and reduces the heat to your joint. The flux it’s filled with leaves minimal residue so there’s no cleanup. This solder is electrically conductive, making it good for electronics and electrical applications.

Electrically conductive and with five flux cores, this solder speeds up the process of soldering electronics, so you use less solder and transmit less heat to the joint. Easily wash away the flux residue with just water.

Electrically conductive, this solder is best for electronics and electronics applications.

The high melting point prevents remelting when soldering successive joints with another solder.

The flux leaves minimal residue so there's no cleanup.

Acid flux has strong cleaning action, but leaves corrosive residue that washes away with water.

This bismuth-tin solder has similar performance properties to lead solder, but is also safe for use in food-processing equipment and copper water pipes.

The flux residue easily washes away with water.

This solder keeps its strength in applications where vibration and frequent and extreme temperature changes occur, such as in water lines and refrigeration equipment.