Weld with the same quality as you would in bright conditions. These helmets have a built-in LED light that brightens your workspace, so you can see your weld and maintain precision even in dark areas. Turn the LED light on with the press of a button, and when it detects an arc or intense light, the light automatically turns off.

As you begin to weld, four arc sensors detect the light and automatically darken the lens. Unlike traditional green welding lenses, these helmets use a true color lens to enhance clarity and color accuracy. They have digital controls behind the lens where you can set the shade number, delay time, and sensitivity. To switch to grind mode without removing your helmet, use the button above the lens.

Mount these helmets to a hard-hat adapter when working in areas that require extra head protection. Attach magnifying lenses to see details better.

Optical clarity measures how clearly a welder can see through the lens based on four categories: visual accuracy, light diffusion, consistency, and distortion. Each category is given a rating on a scale of 1 to 3. The lower the number, the better the clarity. Better optical clarity allows for precise welds, reduces eye strain, and improves focus.

Take full control of your shade level with these helmets—you can set the lens to adjust in half-shade increments. They have digital controls behind the lens where you can set the shade number, delay time, and sensitivity. Save up to nine settings to quickly switch between tasks. To switch to grind mode without removing your helmet, press the button above the lens.

As you weld, four sensors detect the light and automatically darken the lens. To improve weld quality and reduce eye strain, these helmets have a wide panoramic view and a true color lens. The lens enhances clarity and color accuracy to reduce the color distortion of your view.

Solar cells recharge the helmet’s battery while you work.

Mount these helmets to a hard-hat adapter when working in areas that require extra head protection. Attach a magnifying lens to enhance details.

Optical clarity measures how clearly a welder can see through the lens based on four categories: visual accuracy, light diffusion, consistency, and distortion. Each category is given a rating on a scale of 1 to 3. The lower the number, the better the clarity. Better optical clarity allows for precise welds, reduces eye strain, and improves focus.

Also known as pancake welding helmets, these helmets have a flat face so you can get close to your welds. They’re often used when welding pipes, but are also useful where a standard welding helmet would be too bulky. These helmets extend further on one side than a standard welding helmet does for increased face protection from UV light, sparks, and spatter. A balsa wood box mounted inside the helmet fits around your face and eyes to block all light, even when working outdoors. Sand the box for a customizable fit. Designed for all-day comfort, they’re made of lightweight carbon fiber and have an open back for plenty of airflow.

These helmets have a large viewing area for a clear view of your workspace. The instant you start to weld, the lens darkens. Solar cells recharge the helmet’s battery while you work.

Choose a helmet based on which hand you use to hold your torch—they’re designed to protect the side opposite your welding hand, where sparks are most likely to fly. This means that left-hand helmets extend further on the right while right-hand helmets extend further on the left.

Optical clarity measures how clearly a welder can see through the lens based on four categories: visual accuracy, light diffusion, consistency, and distortion. Each category is given a rating on a scale of 1 to 3. The lower the number, the better the clarity. Better optical clarity allows for precise welds, reduces eye strain, and improves focus.

Warning: These helmets are made of carbon fiber, a conductive material. Never let them touch the welding rod holder and the material your ground cable is on at the same time. This could result in electrical shocks, burns, or eye injuries.

These lenses automatically switch from light to dark the instant you start welding. They operate on solar power, so there are no batteries to change.

Multiple-shade lenses allow you to change shade number with the press of a button.

The lens on these shields filters out harmful light to protect your eyes during traditional and laser welding. They meet ANSI Z136.1 specifications for laser safety. The curved design offers better peripheral vision than laser welding goggles and additional face protection from impact, sparks, and radiation. To meet ANSI Z87.1 standards for eye protection, wear these shields with compliant safety glasses. Customize the shield’s fit by twisting the easy-turn knob on the ratchet adjustment.

Visible light is the percentage of visible light that passes through the lens. The lower the percentage, the more light is blocked. Make sure enough light passes through to see your welding work clearly but not so much that it becomes dangerous.

Optical density indicates how much light a lens absorbs at a specific wavelength. The higher the density, the more UV, infrared, and visible light is blocked. Powerful lasers often require an optical density of 5 or higher.

Shade number indicates how much light is filtered by lenses. The higher the shade number, the darker and more protective the lens.