Oxygen Welding Gas Regulators

Filter by

For Use With

Outlet Pressure

Maximum Outlet Pressure Gauge Measurement

Stage

Maximum Inlet Pressure

Inlet CGA Number

Outlet Pressure Adjustment Method

Diaphragm Material

Outlet Connection

Body Material

Outlet Thread Type

Inlet Gender

Outlet Gender

Maximum Inlet Pressure Gauge Reading

Outlet Connection Port

Number of Gauge Ports

Inlet Pressure Gauge Included

Outlet Pressure Gauge Included

Inlet Thread Type

REACH Compliance

DFARS Compliance

Outlet Thread Direction

Outlet Thread Size

Forward

How can we improve?

17 Products

About Gas Regulators

For Use With: See Table
Temperature Range: -20° to 120° F

These valves automatically reduce a high inlet pressure from compressed gas tanks to a lower, stable outlet pressure. All have Compressed Gas Association (CGA) numbered inlet fittings for secure connections to compressed gas tanks. Choose a valve with the same CGA number as your tank and other system components. Valves have a gauge to monitor outlet pressure and a gauge to monitor inlet pressure from the tank.

Choose a valve with a maximum outlet pressure that’s approximately twice your application’s normal operating pressure. Your operating pressure should never exceed 75% of the valve’s maximum outlet pressure.

Single-stage valves reduce pressure in one step, which causes the outlet pressure to fluctuate slightly as you empty the tank. They’re best for applications where a constant outlet pressure isn’t critical.

Two-stage valves progressively reduce pressure over two steps for more consistent outlet pressure at all times. They’re often used in applications that require a constant outlet pressure regardless of the tank level.

Valves with a brass body have a longer service life than valves with a brass and steel body.

Valves with a stainless steel diaphragm can withstand harsh environments.

Single-Stage Valves

Male Outlet × Female Inlet Single-Stage Valve With T-Handle

Male Outlet × Female Inlet Single-Stage Valve With Knob

Inlet				Outlet				Material
CGA Number	Location	Thread Direction	Pressure Gauge Range, psi	Location	Thread Direction	Pressure Range, psi	Pressure Adjustment Method	Body	Seal	Diaphragm		Each
For Use With Oxygen
9/16"-18 UNF Male Outlet × NGO Female Inlet
CGA 540	Side	Right Hand	0 to 4,000	Side	Left Hand	0 to 50	Knob	Brass	PTFE	Neoprene	00000000	0000000
CGA 540	Side	Right Hand	0 to 4,000	Side	Right Hand	0 to 50	T-Handle	Brass	PTFE	Neoprene	00000000	000000
CGA 540	Side	Right Hand	0 to 4,000	Side	Right Hand	0 to 50	T-Handle	Brass	PTFE	Stainless Steel	00000000	000000
CGA 540	Side	Right Hand	0 to 4,000	Side	Right Hand	0 to 125	T-Handle	Brass	PTFE	Rubber	0000000	000000
CGA 540	Side	Right Hand	0 to 4,000	Side	Right Hand	0 to 125	T-Handle	Brass	PTFE	Stainless Steel	0000000	000000
CGA 540	Side	Right Hand	0 to 4,000	Side	Right Hand	0 to 145	Knob	Brass/Steel	PTFE	Rubber	0000000	000000
CGA 540	Side	Right Hand	0 to 4,000	Side	Right Hand	0 to 200	T-Handle	Brass	PTFE	Rubber	000000	000000
CGA 540	Side	Right Hand	0 to 4,000	Side	Right Hand	0 to 200	T-Handle	Brass	PTFE	Stainless Steel	00000000	000000

Two-Stage Valves

Female Outlet × Female Inlet Two-Stage Valve With T-Handle

Male Outlet × Female Inlet Two-Stage Valve With T-Handle

Inlet				Outlet				Material
CGA Number	Location	Thread Direction	Pressure Gauge Range, psi	Location	Thread Direction	Pressure Range, psi	Pressure Adjustment Method	Body	Seal	Diaphragm		Each
For Use With Oxygen
1/4 NPT Female Outlet × NGO Female Inlet
CGA 540	Side	Right Hand	0 to 4,000	Side	Right Hand	0 to 250	T-Handle	Brass	PTFE	Neoprene	0000000	0000000
CGA 540	Side	Right Hand	0 to 4,000	Side	Right Hand	0 to 250	T-Handle	Brass	PTFE	Stainless Steel	0000000	000000
9/16"-18 UNF Male Outlet × NGO Female Inlet
CGA 540	Side	Right Hand	0 to 4,000	Side	Right Hand	0 to 50	T-Handle	Brass	PTFE	Neoprene	00000000	000000
CGA 540	Side	Right Hand	0 to 4,000	Side	Right Hand	0 to 50	T-Handle	Brass	PTFE	Stainless Steel	00000000	000000
CGA 540	Side	Right Hand	0 to 4,000	Side	Right Hand	0 to 125	T-Handle	Brass	PTFE	Stainless Steel	0000000	000000
CGA 540	Side	Right Hand	0 to 4,000	Side	Right Hand	0 to 125	T-Handle	Brass/Steel	PTFE	Rubber	000000	000000

Tank-Mount High-Pressure-Regulating Valves for Air and Inert Gas

For Use With: See Table
Temperature Range: -20° to 120° F

Often used for pressure-vessel testing and other high-pressure applications, these valves can handle at least seven times the outlet pressure of standard tank-mount pressure-regulating valves. They automatically reduce a high inlet pressure from compressed gas tanks to a lower, stable outlet pressure. All have Compressed Gas Association (CGA) numbered inlet fittings for secure connections to compressed gas tanks. Choose a valve with the same CGA number as your tank and other system components. Outlet fittings are Swagelok® for a leak-free seal around hard metal tubing in high-pressure lines. Also known as instrumentation fittings, Swagelok® fittings are compatible with Parker A-Lok, Gyrolok, Bilok, and Tylok fittings. Valves have a gauge to monitor outlet pressure and a gauge to monitor inlet pressure from the tank. They are single stage and reduce pressure in one step, which causes the outlet pressure to fluctuate slightly as you empty the tank.

For Use With Oxygen

Female Outlet × Female Inlet Straight With Knob

Inlet					Outlet					Material
CGA Number	Location	Thread Direction	Pressure Gauge Range, psi	Stage	For Tube OD	Location	Pressure Range, psi	Pressure Adjustment Method	Shape	Body	Seal	Diaphragm		Each
NGO Female Inlet × Swagelok® Female Outlet
CGA 540	Side	Right Hand	0 to 4,000	Single	1/4"	Side	0 to 1,500	Knob	Straight	Brass	PCTFE	Neoprene	0000000	0000000
CGA 540	Side	Right Hand	0 to 4,000	Single	1/4"	Side	0 to 2,500	Knob	Straight	Brass	PCTFE	Neoprene	0000000	000000

Tank-Mount Pressure-Regulating Valves for Cryogenic Cylinders

For Use With: See Table
Temperature Range: -20° to 120° F

Automatically reduce a high inlet pressure from compressed gas tanks to a lower, stable outlet pressure. These valves can remove gases from liquid cryogenic cylinders. They have Compressed Gas Association (CGA) numbered inlet fittings for secure connections to compressed gas tanks. Choose a valve with the same CGA number as your tank and other system components. Valves come with a gauge to monitor outlet pressure. They are single stage and reduce pressure in one step, which causes the outlet pressure to fluctuate slightly as you empty the tank.

	Inlet				Outlet
For Use With	CGA Number	Location	Thread Direction	Stage	Thread Size	Location	Thread Direction	Pressure Range, psi	Pressure Adjustment Method		Each
UNF Male Outlet × NGO Female Inlet
Brass Body—Stainless Steel Diaphragm and PTFE Seal
Oxygen	CGA 540	Side	Right Hand	Single	9/16"-18	Bottom	Right Hand	0 to 125	T-Handle	0000000	0000000

Email Us

About Gas Regulators

Tank-Mount Pressure-Regulating Valves for Air and Inert Gas

Tank-Mount High-Pressure-Regulating Valves for Air and Inert Gas

Tank-Mount Pressure-Regulating Valves for Cryogenic Cylinders