Weld On Studs | McMaster-Carr

Filter by

System of Measurement

Length

Thread Size

Material

Projection Location

Diameter

Base Diameter

Head Diameter

Thread Type

Thread Spacing

For Collet Thread Size

Base Thickness

Component

Tensile Strength

Thread Fit

REACH Compliance

RoHS Compliance

DFARS Compliance

Mount Type

Specifications Met

Base Length

Head Height

Base Width

Forward

How can we improve?

212 Products

Weld Studs


Below-Head Projection	Above-Head Projection

Weld in place for greater rigidity and strength than other studs. These studs have a wide base that distributes the load and projections that concentrate the weld. Length listed is overall length.

Steel—Without a finish, these studs require minimal prep work before welding. After installation, you can paint them for a finished look.

Below-Head Projection—Choose these studs for a strong hold that uses the full strength of the fastener. Pass through a hole and weld them in place.

Above-Head Projection—Weld the head directly to the surface of the material for a smooth appearance.

			Base
	Lg.	Projection Location	Dia.	Thk.	Tensile Strength, psi	Hardness	Pkg. Qty.		Pkg.
Steel





				6-32
				1/2"	Below Head	0.323"	0.052"	60,000	Not Rated	100	000000000	00000
				5/8"	Below Head	0.323"	0.052"	60,000	Not Rated	100	000000000	0000
				3/4"	Below Head	0.323"	0.052"	60,000	Not Rated	100	000000000	0000



						8-32
						3/8"	Below Head	0.385"	0.068"	60,000	Not Rated	100	000000000	0000
						3/8"	Above Head	0.323"	0.052"	60,000	Not Rated	100	000000000	0000
						1/2"	Below Head	0.385"	0.068"	60,000	Not Rated	100	000000000	0000
						3/4"	Below Head	0.385"	0.068"	60,000	Not Rated	100	000000000	0000
						1"	Below Head	0.385"	0.068"	60,000	Not Rated	100	000000000	0000



								10-24
								3/8"	Below Head	0.448"	0.068"	60,000	Not Rated	100	000000000	0000
								3/8"	Above Head	0.385"	0.068"	60,000	Not Rated	100	000000000	0000
								1/2"	Below Head	0.448"	0.068"	60,000	Not Rated	100	000000000	0000
								1/2"	Above Head	0.385"	0.068"	60,000	Not Rated	100	000000000	0000
								5/8"	Below Head	0.448"	0.068"	60,000	Not Rated	100	000000000	00000
								3/4"	Below Head	0.448"	0.068"	60,000	Not Rated	100	000000000	00000
								3/4"	Above Head	0.385"	0.068"	60,000	Not Rated	100	000000000	00000
								1"	Below Head	0.448"	0.068"	60,000	Not Rated	100	000000000	00000
								1 1/4"	Below Head	0.448"	0.068"	60,000	Not Rated	100	000000000	00000



										10-32
										3/8"	Below Head	0.448"	0.068"	60,000	Not Rated	100	000000000	0000
										1/2"	Below Head	0.448"	0.068"	60,000	Not Rated	100	000000000	0000
										1/2"	Above Head	0.385"	0.068"	60,000	Not Rated	100	000000000	0000
										5/8"	Below Head	0.448"	0.068"	60,000	Not Rated	100	000000000	0000
										5/8"	Above Head	0.385"	0.068"	60,000	Not Rated	100	000000000	00000
										3/4"	Below Head	0.448"	0.068"	60,000	Not Rated	100	000000000	00000
										3/4"	Above Head	0.385"	0.068"	60,000	Not Rated	100	000000000	00000
										1"	Below Head	0.448"	0.068"	Not Rated	Not Rated	50	000000000	0000
										1"	Above Head	0.385"	0.068"	60,000	Not Rated	100	000000000	00000



												1/4"-20
												3/8"	Below Head	0.575"	0.083"	Not Rated	Not Rated	50	000000000	0000
												3/8"	Above Head	0.51"	0.083"	60,000	Not Rated	50	000000000	0000
												1/2"	Below Head	0.575"	0.083"	Not Rated	Not Rated	50	000000000	0000
												1/2"	Above Head	0.51"	0.083"	60,000	Not Rated	50	000000000	0000
												5/8"	Below Head	0.575"	0.083"	Not Rated	Not Rated	50	000000000	0000
												5/8"	Above Head	0.51"	0.083"	60,000	Not Rated	50	000000000	0000
												3/4"	Below Head	0.575"	0.083"	Not Rated	Not Rated	50	000000000	00000
												3/4"	Above Head	0.51"	0.083"	60,000	Not Rated	50	000000000	0000
												7/8"	Below Head	0.575"	0.083"	60,000	Not Rated	25	000000000	00000
												1"	Below Head	0.575"	0.083"	Not Rated	Not Rated	50	000000000	00000
												1"	Above Head	0.51"	0.083"	60,000	Not Rated	50	000000000	00000
												1 1/4"	Below Head	0.575"	0.083"	60,000	Not Rated	25	000000000	0000
												1 1/2"	Below Head	0.575"	0.083"	60,000	Not Rated	25	000000000	0000
												1 3/4"	Below Head	0.575"	0.083"	60,000	Not Rated	25	000000000	0000
												2"	Below Head	0.575"	0.083"	60,000	Not Rated	25	000000000	00000



												5/16"-18
		3/4"										Below Head	0.755"	0.099"	60,000	Not Rated	25	000000000	00000
		3/4"	Above Head									0.63"	0.099"	60,000	Not Rated	5	000000000	0000
		1"	Below Head									0.755"	0.099"	60,000	Not Rated	5	000000000	0000
		1 1/4"	Below Head									0.755"	0.099"	60,000	Not Rated	25	000000000	00000
		2"	Below Head									0.755"	0.099"	60,000	Not Rated	5	000000000	00000



				3/8"-16
				1"	Below Head							0.88"	0.114"	60,000	Not Rated	10	000000000	0000
				1 1/4"	Below Head							0.88"	0.114"	60,000	Not Rated	5	000000000	0000
				1 1/2"	Below Head							0.88"	0.114"	60,000	Not Rated	10	000000000	0000
				1 3/4"	Below Head							0.88"	0.114"	60,000	Not Rated	10	000000000	0000



												1/2"-13
						1 1/4"						Below Head	1.005"	0.146"	60,000	Not Rated	5	000000000	00000



												M3.5
												8 mm	Above Head	7 mm	1.1 mm	Not Rated	Not Rated	10	000000000	0000
												25 mm	Above Head	7 mm	1.1 mm	Not Rated	Not Rated	10	000000000	0000



														M4
														6 mm	Above Head	8 mm	1.2 mm	Not Rated	Not Rated	10	000000000	0000
														8 mm	Above Head	8 mm	1.2 mm	Not Rated	Not Rated	10	000000000	0000
								10 mm						Above Head	8 mm	1.2 mm	Not Rated	Not Rated	10	000000000	0000

90° Angle Weld Studs

Weld these studs to flat surfaces in confined areas, narrow channels, and tight corners.

Steel—Without a finish, these studs require minimal prep work before welding. After installation, you can paint them for a finished look.

18-8 Stainless Steel—The choice for wet and outdoor environments, these studs resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

		Base
	Lg.	Lg.	Wd.	Thk.	Tensile Strength	Hardness	Pkg. Qty.		Pkg.
Steel





				6-32
				1/2"	9/16"	7/32"	3/64"	Not Rated	Not Rated	50	000000000	000000



						8-32
						1/2"	5/8"	1/4"	1/16"	Not Rated	Not Rated	50	000000000	00000



								10-24
								1/2"	11/16"	5/16"	1/16"	Not Rated	Not Rated	50	000000000	00000



										10-32
										1/2"	11/16"	11/32"	1/16"	Not Rated	Not Rated	50	000000000	00000



												1/4"-20
												1/2"	3/4"	3/8"	3/32"	Not Rated	Not Rated	25	000000000	0000
												5/8"	3/4"	3/8"	3/32"	Not Rated	Not Rated	25	000000000	0000
												3/4"	3/4"	3/8"	3/32"	Not Rated	Not Rated	25	000000000	0000
												1"	3/4"	3/8"	3/32"	Not Rated	Not Rated	25	000000000	00000

												18-8 Stainless Steel





																6-32
																3/8"	9/16"	7/32"	3/64"	Not Rated	Not Rated	25	000000000	00000
																1/2"	9/16"	7/32"	3/64"	Not Rated	Not Rated	25	000000000	00000



																		8-32
																		3/8"	5/8"	1/4"	1/16"	Not Rated	Not Rated	25	000000000	00000
																		1/2"	5/8"	1/4"	1/16"	Not Rated	Not Rated	25	000000000	00000
																		5/8"	5/8"	1/4"	1/16"	Not Rated	Not Rated	10	000000000	0000
																		3/4"	5/8"	1/4"	1/16"	Not Rated	Not Rated	10	000000000	0000
																		1"	5/8"	1/4"	1/16"	Not Rated	Not Rated	10	000000000	0000
																		1 1/4"	5/8"	1/4"	1/16"	Not Rated	Not Rated	10	000000000	0000
																		1 1/2"	5/8"	1/4"	1/16"	Not Rated	Not Rated	10	000000000	0000



																				10-24
																				3/8"	11/16"	5/16"	1/16"	Not Rated	Not Rated	10	000000000	0000
																				1/2"	11/16"	5/16"	1/16"	Not Rated	Not Rated	10	000000000	0000
																				3/4"	11/16"	5/16"	1/16"	Not Rated	Not Rated	10	000000000	0000
																				1"	11/16"	5/16"	1/16"	Not Rated	Not Rated	10	000000000	0000
																				1 1/4"	11/16"	5/16"	1/16"	Not Rated	Not Rated	10	000000000	0000



																						10-32
3/8"																						11/16"	11/32"	1/16"	Not Rated	Not Rated	10	000000000	0000
1/2"	11/16"																					11/32"	1/16"	Not Rated	Not Rated	10	000000000	0000
3/4"	11/16"																					11/32"	1/16"	Not Rated	Not Rated	10	000000000	0000
1"	11/16"	11/32"																				1/16"	Not Rated	Not Rated	10	000000000	0000
1 1/4"	11/16"	11/32"	1/16"																			Not Rated	Not Rated	10	000000000	00000
1 3/4"	11/16"	11/32"	1/16"																			Not Rated	Not Rated	10	000000000	00000



		1/4"-20
		1/2"	3/4"	3/8"	3/32"																	Not Rated	Not Rated	10	000000000	00000
		5/8"	3/4"	3/8"	3/32"																	Not Rated	Not Rated	10	000000000	00000
		3/4"	3/4"	3/8"	3/32"																	Not Rated	Not Rated	10	000000000	00000
		7/8"	3/4"	3/8"	3/32"																	Not Rated	Not Rated	10	000000000	00000
		1"	3/4"	3/8"	3/32"	Not Rated																Not Rated	5	000000000	0000
		1 1/4"	3/4"	3/8"	3/32"	Not Rated	Not Rated															5	000000000	0000
		1 1/2"	3/4"	3/8"	3/32"	Not Rated	Not Rated															5	000000000	0000
		1 3/4"	3/4"	3/8"	3/32"	Not Rated	Not Rated															5	000000000	0000



				5/16"-18
				5/8"	7/8"	7/16"	1/8"	Not Rated	Not Rated													5	000000000	0000
				3/4"	7/8"	7/16"	1/8"	Not Rated	Not Rated													5	000000000	0000
				1"	7/8"	7/16"	1/8"	Not Rated	Not Rated													5	000000000	0000
				1 1/4"	7/8"	7/16"	1/8"	Not Rated	Not Rated	5												000000000	0000
				1 1/2"	7/8"	7/16"	1/8"	Not Rated	Not Rated	5	000000000											00000
				2"	7/8"	7/16"	1/8"	Not Rated	Not Rated	5	000000000											00000



						3/8"-16
						1"	1"	17/32"	5/32"	Not Rated	Not Rated											5	000000000	00000
						1 1/4"	1"	17/32"	5/32"	Not Rated	Not Rated											5	000000000	00000
						1 1/2"	1"	17/32"	5/32"	Not Rated	Not Rated											5	000000000	00000

Stud Welders

Join threaded studs and pins to metal surfaces in milliseconds, forming bonds stronger than the studs themselves. Just load a stud into the gun, aim it against your base material, and pull the trigger to fuse the two together.

Unlike drawn arc stud welders, our capacitor discharge systems work with metals less than a millimeter thick. They won’t leave fastener heads on the opposite side of the base material, so they’re often used for jobs requiring a clean-looking finish, such as attaching handles to high-end cookware. The one-sided welds are also preferred by the USDA for fabricating dairy tanks and other food-safe machinery – with no holes drilled, germs have nowhere to hide.

Welders

Easily portable at less than 25 lbs.
Plugs into standard outlets
Full-color LCD display visualizes power output and includes material presets
A collet is required; choose one below that matches the size or gauge of your studs or pins

		Input				Overall
	Stud Weld Rate	Voltage, V AC	Freq., Hz	Current, amp	Output Voltage Range, V DC	Ht.	Wd.	Dp.	Cord Lg., ft.	Includes		Each
Three Prong


		4 per min. @ 200V DC	120	60	10	70 to 200	13"	12"	9"	6	Control Unit Welding Gun with 21-ft. Cable 4 Stop Pins for Setting Threaded Studs and Pins in Collet 15-ft. Ground Cable with 2 Ground Clamps	0000000	000000000

Collets

Hold pins in place during welding
Must match the size or gauge of the stud or pin
Studs from other systems won’t fit; choose matching studs below
Also called chucks

For Pin Ga.		Each


—	12 Ga.	00000000	000000
4-40	—	00000000	00000
6-32	10 Ga.	00000000	00000
8-32	—	00000000	00000
10-24	—	00000000	00000
1/4"-20	—	00000000	00000

Threaded Studs

Suitable for steel and stainless steel base materials, as well as aluminum and brass
Also called fasteners

Copper-Plated Steel—Copper-plated steel studs have good corrosion resistance.

18-8 Stainless Steel—18-8 stainless steel studs are more corrosion resistant than copper-plated steel studs.

Aluminum—Aluminum studs are more lightweight than steel or stainless steel studs. They’re nonmagnetic. In wet environments, they resist corrosion.

				Copper-Plated Steel			18-8 Stainless Steel			Aluminum
Thread Size	For Collet Thread Size	Head Dia.	Lg.	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.


	4-40	4-40	3/16"	1/2"	100	0000000	000000	—	———	0	—	———	0
	6-32	6-32	7/32"	3/8"	100	00000000	00000	100	00000000	000000	—	———	0
	6-32	6-32	7/32"	1/2"	100	0000000	0000	100	0000000	00000	—	———	0
	6-32	6-32	7/32"	3/4"	100	0000000	00000	100	0000000	00000	—	———	0
	6-32	6-32	7/32"	1 1/2"	100	0000000	00000	100	0000000	00000	—	———	0
	8-32	8-32	1/4"	3/8"	100	00000000	00000	—	———	0	—	———	0
	8-32	8-32	1/4"	1/2"	100	0000000	0000	100	0000000	00000	—	———	0
	8-32	8-32	1/4"	5/8"	100	00000000	00000	—	———	0	—	———	0
	8-32	8-32	1/4"	3/4"	100	0000000	00000	100	0000000	00000	—	———	0
	10-24	10-24	1/4"	1/2"	100	0000000	00000	100	0000000	00000	—	———	0
	10-24	10-24	1/4"	3/4"	—	———	0	—	———	0	100	00000000	000000
	10-24	10-24	1/4"	1"	100	0000000	00000	100	0000000	00000	—	———	0
	10-32	10-32	1/4"	3/8"	—	———	0	100	00000000	00000	—	———	0
	10-32	10-32	1/4"	1/2"	—	———	0	100	00000000	00000	—	———	0
	10-32	10-32	1/4"	3/4"	—	———	0	100	00000000	00000	—	———	0
	1/4"-20	1/4"-20	5/16"	1/2"	100	0000000	00000	100	0000000	00000	100	00000000	00000
	1/4"-20	1/4"-20	5/16"	5/8"	—	———	0	100	00000000	00000	—	———	0
	1/4"-20	1/4"-20	5/16"	3/4"	100	00000000	00000	100	0000000	00000	—	———	0
	1/4"-20	1/4"-20	5/16"	1"	100	0000000	00000	100	0000000	00000	100	00000000	00000
	1/4"-20	1/4"-20	5/16"	1 1/2"	—	———	0	100	00000000	000000	—	———	0

Pins

Often used for installing insulation and acoustical lining

			Copper-Plated Steel
For Collet Ga. No.	For Collet Thread Size	Lg.	Pkg. Qty.		Pkg.


	10 Ga.	6-32	2 1/2"	100	00000000	000000
	10 Ga.	6-32	3"	100	0000000	00000
	10 Ga.	6-32	6"	100	0000000	00000
	12 Ga.	—	1"	100	00000000	00000
	12 Ga.	—	2"	100	00000000	00000
	12 Ga.	—	2 1/2"	100	0000000	00000
	12 Ga.	—	6"	100	00000000	00000

Weld Anchors for Concrete

Also known as Nelson studs, these anchors strengthen the connection between steel framing and concrete. Weld them to the framing to enhance adhesion and resist shear forces. Their heads ensure secure embedding when wet concrete is poured. A ferrule is included if you choose to weld with a stud welder. Designed for permanent installations, you'd have to cut these anchors out to remove them.

Steel—Best for dry environments since moisture will cause these anchors to rust.

		Head			Ultimate Strength
	Lg.	Dia.	Ht.	Tensile Strength, psi	Pull-Out	Shear	Ferrule Material	Specs. Met	Pkg. Qty.		Pkg.
Steel





				1/4" Diameter
				4 1/8"	1/2"	0.187"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	10	000000000	00000



						3/8" Diameter
						2 1/8"	3/4"	0.281"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	10	000000000	0000
						3 1/8"	3/4"	0.281"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	10	000000000	0000
						4 1/8"	3/4"	0.281"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	10	000000000	00000
						6 1/8"	3/4"	0.281"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	10	000000000	00000



								1/2" Diameter
								2 1/8"	1"	0.312"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	10	000000000	00000
								3 1/8"	1"	0.312"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	10	000000000	00000
								4 1/8"	1"	0.312"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	10	000000000	00000
								5 5/16"	1"	0.312"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	5	000000000	0000
								6 1/8"	1"	0.312"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	5	000000000	0000
								8 1/8"	1"	0.312"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	5	000000000	00000



										5/8" Diameter
										4 3/16"	1 1/4"	0.312"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	5	000000000	00000
										5 3/16"	1 1/4"	0.312"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	5	000000000	00000
										6 3/16"	1 1/4"	0.312"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	5	000000000	00000
										6 9/16"	1 1/4"	0.312"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	5	000000000	00000
										8 3/16"	1 1/4"	0.312"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	1	000000000	0000



												3/4" Diameter
												3 3/16"	1 1/4"	0.375"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	5	000000000	00000
												3 3/8"	1 1/4"	0.375"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	5	000000000	00000
												4 3/16"	1 1/4"	0.375"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	5	000000000	00000
												4 3/8"	1 1/4"	0.375"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	5	000000000	00000
												4 7/8"	1 1/4"	0.375"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	5	000000000	00000
												5 3/16"	1 1/4"	0.375"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	5	000000000	00000
												5 3/8"	1 1/4"	0.375"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	5	000000000	00000
												5 7/8"	1 1/4"	0.375"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	5	000000000	00000
												6 3/16"	1 1/4"	0.375"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	5	000000000	00000
												8 3/16"	1 1/4"	0.375"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	1	000000000	0000
												9 3/16"	1 1/4"	0.375"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	1	000000000	0000



														7/8" Diameter
														4 3/16"	1 3/8"	0.375"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	5	000000000	00000
														5 3/16"	1 3/8"	0.375"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	1	000000000	0000
														6 3/16"	1 3/8"	0.375"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	1	000000000	0000
														7 3/16"	1 3/8"	0.375"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	1	000000000	0000
														8 3/16"	1 3/8"	0.375"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	1	000000000	0000
														9 3/16"	1 3/8"	0.375"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	1	000000000	0000



																1" Diameter
																4 1/4"	1 5/8"	0.5"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	1	000000000	0000
6 1/4"																1 5/8"	0.5"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	1	000000000	0000
8 1/4"	1 5/8"															0.5"	65,000	Not Rated	Not Rated	Ceramic	ASTM A108, AWS D1.1	1	000000000	0000

Through-Hole-Mount Weld Pins

Pass these pins through a mounting hole and spot weld the head to the surface for greater rigidity and strength than other pins.

Carbon Steel—Carbon steel pins have good strength.

18-8 Stainless Steel—18-8 stainless steel pins offer a balance of strength and corrosion resistance. They may be mildly magnetic. Pins are passivated for added protection against corrosion and oxidation.

			Base		Carbon Steel			18-8 Stainless Steel
	Lg.	Dia. Tolerance	Dia.	Thk.	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.
5/32" Diameter


		1/2"	0.0028" to 0.0068"	7/16"	1/16"	10	000000000	00000	10	000000000	00000

		3/16" Diameter


				3/4"	-0.0025" to 0.0025"	1/2"	5/64"	10	000000000	0000	10	000000000	0000
				1"	-0.0025" to 0.0025"	1/2"	5/64"	10	000000000	0000	10	000000000	00000

				1/4" Diameter


						3/4"	-0.006" to 0"	5/8"	5/64"	10	000000000	0000	5	000000000	0000
						1"	-0.006" to 0"	5/8"	5/64"	10	000000000	0000	5	000000000	0000
						1 1/4"	-0.006" to 0"	5/8"	5/64"	10	000000000	0000	5	000000000	00000
						2"	-0.006" to 0"	5/8"	5/64"	10	000000000	0000	5	000000000	00000

Surface-Mount Weld Pins

Spot weld these pins directly to a surface for greater rigidity and strength than other pins—no mounting hole required.

Carbon Steel—Carbon steel pins have good strength.

			Base		Carbon Steel			18-8 Stainless Steel
	Lg.	Dia. Tolerance	Dia.	Thk.	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.
1/8" Diameter


		1/2"	-0.011" to -0.008"	1/4"	3/64"	10	000000000	00000	—	———	0
		1/2"	-0.011" to -0.006"	1/4"	3/64"	—	———	0	10	000000000	00000

		3/16" Diameter


				1/2"	-0.0025" to 0.0025"	7/16"	1/16"	10	000000000	0000	10	000000000	0000
				5/8"	-0.0025" to 0.0025"	7/16"	1/16"	10	000000000	0000	10	000000000	00000

				1/4" Diameter


						5/16"	-0.006" to 0"	1/2"	5/64"	10	000000000	0000	10	000000000	00000
						1/2"	-0.006" to 0"	1/2"	5/64"	10	000000000	0000	10	000000000	00000
						3/4"	-0.006" to 0"	1/2"	5/64"	10	000000000	0000	10	000000000	00000
						1"	-0.006" to 0"	1/2"	5/64"	10	000000000	0000	5	000000000	0000