McMaster-Carr logo
    Filter by
    System of Measurement
    Thread Type
    Industrial Info Compare
    Thread Spacing
    Industrial Info Compare
    Projection Location
    Connection Method
    Tensile Strength
    Industrial Info Snippet
    For Minimum Length Between Hole Center and Sheet Edge
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    329 Products

    Press-Fit Studs
    3D CAD models available

    Image of Product. Front orientation. Studs. Press-Fit Studs.
    Press these studs into a drilled or punched hole with an arbor press or similar pressure tool. Also known as self-clinching studs, ribs under the head hold the stud firmly in place. Length listed is overall length.
    Zinc-Plated Steel—The most common choice for areas with occasional exposure to moisture.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these studs resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    Lg.
    PEM® Part
    No.
    Thread
    Lg.
    For Min.
    Material Thk.
    For Min. Lg. Between Hole
    Ctr. and Sheet Edge
    For Hole
    Dia.
    Hole Size
    Tolerance
    Drill Bit
    Size
    Base
    Dia.
    Tensile
    Strength
    Hardness
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
     
    2-56
    1/4"FH-256-411/64"0.040"3/16"0.085"0.000" to 0.003"44 Ga.0.159"Not RatedNot Rated5000000000000000
    5/16"FH-256-515/64"0.040"3/16"0.085"0.000" to 0.003"44 Ga.0.159"Not RatedNot Rated500000000000000
    3/8"FH-256-619/64"0.040"3/16"0.085"0.000" to 0.003"44 Ga.0.159"Not RatedNot Rated500000000000000
    1/2"FH-256-831/64"0.040"3/16"0.085"0.000" to 0.003"44 Ga.0.159"Not RatedNot Rated500000000000000
    5/8"FH-256-1035/64"0.040"3/16"0.085"0.000" to 0.003"44 Ga.0.159"Not RatedNot Rated500000000000000
    3/4"FH-256-1243/64"0.040"3/16"0.085"0.000" to 0.003"44 Ga.0.159"Not RatedNot Rated250000000000000
     
    4-40
    1/4"FH-440-45/32"0.040"7/32"0.111"0.000" to 0.003"34 Ga.0.191"Not RatedNot Rated1000000000000000
    5/16"FH-440-515/64"0.040"7/32"0.111"0.000" to 0.003"34 Ga.0.191"Not RatedNot Rated500000000000000
    3/8"FH-440-69/32"0.040"7/32"0.111"0.000" to 0.003"34 Ga.0.191"Not RatedNot Rated1000000000000000
    1/2"FH-440-813/32"0.040"7/32"0.111"0.000" to 0.003"34 Ga.0.191"Not RatedNot Rated1000000000000000
    5/8"FH-440-1017/32"0.040"7/32"0.111"0.000" to 0.003"34 Ga.0.191"Not RatedNot Rated500000000000000
    3/4"FH-440-1243/64"0.040"7/32"0.111"0.000" to 0.003"34 Ga.0.191"Not RatedNot Rated500000000000000
    7/8"FH-440-1451/64"0.040"7/32"0.111"0.000" to 0.003"34 Ga.0.191"Not RatedNot Rated250000000000000
    1"FH-440-1659/64"0.040"7/32"0.111"0.000" to 0.003"34 Ga.0.191"Not RatedNot Rated250000000000000
    1 1/4"FH-440-201 11/64"0.040"7/32"0.111"0.000" to 0.003"34 Ga.0.191"Not RatedNot Rated250000000000000
     
    6-32
    1/4"FH-632-45/32"0.040"1/4"0.137"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated1000000000000000
    5/16"FH-632-57/32"0.040"1/4"0.137"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated1000000000000000
    3/8"FH-632-69/32"0.040"1/4"0.137"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated1000000000000000
    1/2"FH-632-813/32"0.040"1/4"0.137"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated1000000000000000
    5/8"FH-632-1017/32"0.040"1/4"0.137"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated500000000000000
    3/4"FH-632-1221/32"0.040"1/4"0.137"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated500000000000000
    7/8"FH-632-1425/32"0.040"1/4"0.138"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated500000000000000
    1"FH-632-1629/32"0.040"1/4"0.137"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated500000000000000
    1 1/4"FH-632-201 5/32"0.040"1/4"0.138"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated500000000000000
    1 1/2"FH-632-241 13/32"0.040"1/4"0.138"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated250000000000000
     
    8-32
    1/4"FH-832-45/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.252"Not RatedNot Rated500000000000000
    5/16"FH-832-57/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.252"Not RatedNot Rated500000000000000
    3/8"FH-832-69/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.252"Not RatedNot Rated500000000000000
    1/2"FH-832-813/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.252"Not RatedNot Rated500000000000000
    5/8"FH-832-1017/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.252"Not RatedNot Rated500000000000000
    3/4"FH-832-1221/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.252"Not RatedNot Rated500000000000000
    7/8"FH-832-1425/32"0.040"9/32"0.161"0.000" to 0.003"20 Ga.0.252"Not RatedNot Rated500000000000000
    1"FH-832-1629/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.252"Not RatedNot Rated500000000000000
    1 1/4"FH-832-201 5/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.252"Not RatedNot Rated500000000000000
    1 1/2"FH-832-241 13/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.252"Not RatedNot Rated250000000000000
     
    10-24
    5/16"FH-024-57/32"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated250000000000000
    3/8"FH-024-617/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated500000000000000
    1/2"FH-024-825/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated500000000000000
    5/8"FH-024-1033/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated500000000000000
    3/4"FH-024-1241/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated500000000000000
    7/8"FH-024-1449/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated500000000000000
    1"FH-024-1657/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated500000000000000
    1 1/4"FH-024-201 5/32"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated250000000000000
    1 1/2"FH-024-241 13/32"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated100000000000000
     
    10-32
    5/16"FH-032-57/32"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated250000000000000
    3/8"FH-032-617/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated500000000000000
    1/2"FH-032-825/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated500000000000000
    5/8"FH-032-1033/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated500000000000000
    3/4"FH-032-1241/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated500000000000000
    7/8"FH-032-1449/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated500000000000000
    1"FH-032-1657/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated500000000000000
    1 1/4"FH-032-201 9/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated500000000000000
    1 1/2"FH-032-241 13/32"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated250000000000000
     
    1/4"-20
    3/8"FH-0420-615/64"0.062"5/16"1/4"0.000" to 0.003"1/4"0.352"Not RatedNot Rated250000000000000
    1/2"FH-0420-823/64"0.062"5/16"0.249"0.000" to 0.003"1/4"0.352"Not RatedNot Rated500000000000000
    5/8"FH-0420-1031/64"0.062"5/16"0.249"0.000" to 0.003"1/4"0.352"Not RatedNot Rated250000000000000
    3/4"FH-0420-1239/64"0.062"5/16"0.249"0.000" to 0.003"1/4"0.352"Not RatedNot Rated250000000000000
    7/8"FH-0420-1447/64"0.062"5/16"0.249"0.000" to 0.003"1/4"0.352"Not RatedNot Rated250000000000000
    1"FH-0420-1655/64"0.062"5/16"0.249"0.000" to 0.003"1/4"0.352"Not RatedNot Rated250000000000000
    1 1/8"FH-0420-1863/64"0.062"5/16"0.249"0.000" to 0.003"1/4"0.352"Not RatedNot Rated100000000000000
    1 1/4"FH-0420-201 7/64"0.062"5/16"0.249"0.000" to 0.003"1/4"0.352"Not RatedNot Rated250000000000000
    1 1/2"FH-0420-241 23/64"0.062"5/16"0.249"0.000" to 0.003"1/4"0.352"Not RatedNot Rated250000000000000
    2"FH-0420-321 55/64"0.062"5/16"0.249"0.000" to 0.003"1/4"0.352"Not RatedNot Rated100000000000000
     
    5/16"-18
    1/2"FH-0518-811/32"0.093"3/8"0.311"0.000" to 0.003"N0.391"Not RatedNot Rated100000000000000
    5/8"FH-0518-1015/32"0.093"3/8"0.311"0.000" to 0.003"N0.391"Not RatedNot Rated250000000000000
    3/4"FH-0518-1219/32"0.093"3/8"0.311"0.000" to 0.003"N0.391"Not RatedNot Rated250000000000000
    7/8"FH-0518-1423/32"0.093"3/8"0.311"0.000" to 0.003"N0.391"Not RatedNot Rated100000000000000
    1"FH-0518-1627/32"0.093"3/8"0.311"0.000" to 0.003"N0.391"Not RatedNot Rated100000000000000
    1 1/4"FH-0518-201 5/64"0.093"3/8"0.311"0.000" to 0.003"N0.391"Not RatedNot Rated100000000000000
    1 1/2"FH-0518-241 21/64"0.093"3/8"0.311"0.000" to 0.003"N0.391"Not RatedNot Rated100000000000000
     
    M2.5 × 0.45 mm
    6 mmFH-M2.5-64 mm1.000 mm5.5 mm2.5 mm0.000 mm to 0.08 mm40 Ga.4.5 mmNot RatedNot Rated500000000000000
    10 mmFH-M2.5-108 mm1.000 mm5.5 mm2.5 mm0.000 mm to 0.08 mm40 Ga.4.5 mmNot RatedNot Rated500000000000000
    15 mmFH-M2.5-1513 mm1.000 mm5.5 mm2.5 mm0.000 mm to 0.08 mm40 Ga.4.5 mmNot RatedNot Rated500000000000000
    18 mmFH-M2.5-1816 mm1.000 mm5.5 mm2.5 mm0.000 mm to 0.08 mm40 Ga.4.5 mmNot RatedNot Rated250000000000000
     
    M3 × 0.5 mm
    6 mmFH-M3-64 mm1.000 mm5.5 mm3 mm0.000 mm to 0.08 mm3.0 mm5 mmNot RatedNot Rated500000000000000
    8 mmFH-M3-86 mm1.000 mm5.5 mm3 mm0.000 mm to 0.08 mm3.0 mm5 mmNot RatedNot Rated500000000000000
    10 mmFH-M3-108 mm1.000 mm5.5 mm3 mm0.000 mm to 0.08 mm3.0 mm5 mmNot RatedNot Rated500000000000000
    12 mmFH-M3-1210 mm1.000 mm5.5 mm3 mm0.000 mm to 0.08 mm3.0 mm5 mmNot RatedNot Rated500000000000000
    15 mmFH-M3-1513 mm1.000 mm5.5 mm3 mm0.000 mm to 0.08 mm3.0 mm5 mmNot RatedNot Rated500000000000000
    18 mmFH-M3-1816 mm1.000 mm5.5 mm3 mm0.000 mm to 0.08 mm3.0 mm5 mmNot RatedNot Rated500000000000000
    20 mmFH-M3-2018 mm1.000 mm5.5 mm3 mm0.000 mm to 0.08 mm3.0 mm5 mmNot RatedNot Rated250000000000000
    25 mmFH-M3-2523 mm1.000 mm5.5 mm3 mm0.000 mm to 0.08 mm3.0 mm5 mmNot RatedNot Rated250000000000000
     
    M3.5 × 0.6 mm
    8 mmFH-M3.5-86 mm1.000 mm6.5 mm3.5 mm0.000 mm to 0.08 mm3.5 mm5.7 mmNot RatedNot Rated500000000000000
    10 mmFH-M3.5-108 mm1.000 mm6.5 mm3.5 mm0.000 mm to 0.08 mm3.5 mm5.7 mmNot RatedNot Rated500000000000000
    12 mmFH-M3.5-1210 mm1.000 mm6.5 mm3.5 mm0.000 mm to 0.08 mm3.5 mm5.7 mmNot RatedNot Rated250000000000000
     
    M4 × 0.7 mm
    6 mmFH-M4-64 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm22 Ga.6.3 mmNot RatedNot Rated500000000000000
    8 mmFH-M4-86 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm22 Ga.6.3 mmNot RatedNot Rated500000000000000
    10 mmFH-M4-108 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm22 Ga.6.3 mmNot RatedNot Rated500000000000000
    12 mmFH-M4-1210 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm22 Ga.6.3 mmNot RatedNot Rated500000000000000
    15 mmFH-M4-1513 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm22 Ga.6.3 mmNot RatedNot Rated500000000000000
    18 mmFH-M4-1816 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm22 Ga.6.3 mmNot RatedNot Rated500000000000000
    20 mmFH-M4-2018 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm22 Ga.6.3 mmNot RatedNot Rated500000000000000
    25 mmFH-M4-2523 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm22 Ga.6.3 mmNot RatedNot Rated500000000000000
    30 mmFH-M4-3028 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm22 Ga.6.3 mmNot RatedNot Rated250000000000000
    35 mmFH-M4-3533 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm22 Ga.6.3 mmNot RatedNot Rated250000000000000
     
    M5 × 0.8 mm
    8 mmFH-M5-85 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.9 mmNot RatedNot Rated250000000000000
    10 mmFH-M5-107 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.9 mmNot RatedNot Rated500000000000000
    12 mmFH-M5-129 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.9 mmNot RatedNot Rated500000000000000
    15 mmFH-M5-1512 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.9 mmNot RatedNot Rated500000000000000
    18 mmFH-M5-1815 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.9 mmNot RatedNot Rated500000000000000
    20 mmFH-M5-2017 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.9 mmNot RatedNot Rated500000000000000
    25 mmFH-M5-2522 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.9 mmNot RatedNot Rated500000000000000
    30 mmFH-M5-3027 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.9 mmNot RatedNot Rated250000000000000
    35 mmFH-M5-3532 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.9 mmNot RatedNot Rated100000000000000
     
    M6 × 1 mm
    10 mmFH-M6-107 mm1.600 mm8 mm6 mm0.000 mm to 0.08 mm6.0 mm8.6 mmNot RatedNot Rated250000000000000
    12 mmFH-M6-129 mm1.600 mm8 mm6 mm0.000 mm to 0.08 mm6.0 mm8.6 mmNot RatedNot Rated250000000000000
    15 mmFH-M6-1512 mm1.600 mm8 mm6 mm0.000 mm to 0.08 mm6.0 mm8.6 mmNot RatedNot Rated250000000000000
    18 mmFH-M6-1815 mm1.600 mm8 mm6 mm0.000 mm to 0.08 mm6.0 mm8.6 mmNot RatedNot Rated250000000000000
    20 mmFH-M6-2017 mm1.600 mm8 mm6 mm0.000 mm to 0.08 mm6.0 mm8.6 mmNot RatedNot Rated250000000000000
    25 mmFH-M6-2522 mm1.600 mm8 mm6 mm0.000 mm to 0.08 mm6.0 mm8.6 mmNot RatedNot Rated250000000000000
    30 mmFH-M6-3027 mm1.600 mm8 mm6 mm0.000 mm to 0.08 mm6.0 mm8.6 mmNot RatedNot Rated250000000000000
    35 mmFH-M6-3532 mm1.600 mm8 mm6 mm0.000 mm to 0.08 mm6.0 mm8.6 mmNot RatedNot Rated100000000000000
     
    M8 × 1.25 mm
    12 mmFH-M8-128 mm2.400 mm9.5 mm8 mm0.000 mm to 0.08 mm8.0 mm10 mmNot RatedNot Rated100000000000000
    15 mmFH-M8-1511 mm2.400 mm9.5 mm8 mm0.000 mm to 0.08 mm8.0 mm10 mmNot RatedNot Rated250000000000000
    20 mmFH-M8-2016 mm2.400 mm9.5 mm8 mm0.000 mm to 0.08 mm8.0 mm10 mmNot RatedNot Rated100000000000000
    25 mmFH-M8-2521 mm2.400 mm9.5 mm8 mm0.000 mm to 0.08 mm8.0 mm10 mmNot RatedNot Rated100000000000000
    30 mmFH-M8-3026 mm2.400 mm9.5 mm8 mm0.000 mm to 0.08 mm8.0 mm10 mmNot RatedNot Rated100000000000000
    35 mmFH-M8-3531 mm2.400 mm9.5 mm8 mm0.000 mm to 0.08 mm8.0 mm10 mmNot RatedNot Rated100000000000000
     
    18-8 Stainless Steel
     
    2-56
    1/4"FHS-256-45/32"0.040"3/16"0.085"0.000" to 0.003"44 Ga.0.129"Not RatedNot Rated500000000000000
    5/16"FHS-256-57/32"0.040"3/16"0.085"0.000" to 0.003"44 Ga.0.129"Not RatedNot Rated500000000000000
    3/8"FHS-256-65/16"0.040"3/16"0.085"0.000" to 0.003"44 Ga.0.129"Not RatedNot Rated500000000000000
    1/2"FHS-256-827/64"0.040"3/16"0.085"0.000" to 0.003"44 Ga.0.129"Not RatedNot Rated250000000000000
    5/8"FHS-256-1035/64"0.040"3/16"0.085"0.000" to 0.003"44 Ga.0.129"Not RatedNot Rated250000000000000
    3/4"FHS-256-1243/64"0.040"3/16"0.085"0.000" to 0.003"44 Ga.0.129"Not RatedNot Rated100000000000000
     
    4-40
    1/4"FHS-440-45/32"0.040"7/32"0.111"0.000" to 0.003"34 Ga.0.191"Not RatedNot Rated500000000000000
    5/16"FHS-440-57/32"0.040"7/32"0.111"0.000" to 0.003"34 Ga.0.191"Not RatedNot Rated500000000000000
    3/8"FHS-440-69/32"0.040"7/32"0.111"0.000" to 0.003"34 Ga.0.191"Not RatedNot Rated500000000000000
    1/2"FHS-440-813/32"0.040"7/32"0.111"0.000" to 0.003"34 Ga.0.191"Not RatedNot Rated500000000000000
    5/8"FHS-440-1035/64"0.040"7/32"0.111"0.000" to 0.003"34 Ga.0.191"Not RatedNot Rated250000000000000
    3/4"FHS-440-1221/32"0.040"7/32"0.111"0.000" to 0.003"34 Ga.0.191"Not RatedNot Rated250000000000000
    7/8"FHS-440-1451/64"0.040"7/32"0.111"0.000" to 0.003"34 Ga.0.191"Not RatedNot Rated100000000000000
    1"FHS-440-1629/32"0.040"7/32"0.111"0.000" to 0.003"34 Ga.0.191"Not RatedNot Rated100000000000000
     
    6-32
    1/4"FHS-632-45/32"0.040"1/4"0.137"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated500000000000000
    5/16"FHS-632-57/32"0.040"1/4"0.137"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated500000000000000
    3/8"FHS-632-69/32"0.040"1/4"0.137"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated250000000000000
    1/2"FHS-632-813/32"0.040"1/4"0.137"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated250000000000000
    5/8"FHS-632-1017/32"0.040"1/4"0.137"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated250000000000000
    3/4"FHS-632-1221/32"0.040"1/4"0.137"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated250000000000000
    7/8"FHS-632-1425/32"0.040"1/4"0.137"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated250000000000000
    1"FHS-632-1629/32"0.040"1/4"0.137"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated250000000000000
    1 1/4"FHS-632-201 5/32"0.040"1/4"0.137"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated250000000000000
    1 1/2"FHS-632-241 13/32"0.040"1/4"0.137"0.000" to 0.003"3.5 mm0.221"Not RatedNot Rated100000000000000
     
    8-32
    1/4"FHS-832-45/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.222"Not RatedNot Rated500000000000000
    5/16"FHS-832-57/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.222"Not RatedNot Rated500000000000000
    3/8"FHS-832-69/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.252"Not RatedNot Rated250000000000000
    1/2"FHS-832-813/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.252"Not RatedNot Rated250000000000000
    5/8"FHS-832-1017/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.252"Not RatedNot Rated250000000000000
    3/4"FHS-832-1221/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.252"Not RatedNot Rated250000000000000
    7/8"FHS-832-1425/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.222"Not RatedNot Rated250000000000000
    1"FHS-832-1629/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.252"Not RatedNot Rated250000000000000
    1 1/4"FHS-832-201 5/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.222"Not RatedNot Rated250000000000000
    1 1/2"FHS-832-241 13/32"0.040"9/32"0.163"0.000" to 0.003"20 Ga.0.222"Not RatedNot Rated100000000000000
     
    10-24
    3/8"FHS-024-69/32"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.241"Not RatedNot Rated250000000000000
    1/2"FHS-024-813/32"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.241"Not RatedNot Rated250000000000000
    5/8"FHS-024-1033/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.241"Not RatedNot Rated250000000000000
    3/4"FHS-024-1221/32"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.241"Not RatedNot Rated250000000000000
    7/8"FHS-024-1449/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.241"Not RatedNot Rated250000000000000
    1"FHS-024-1629/32"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.241"Not RatedNot Rated250000000000000
    1 1/4"FHS-024-201 5/32"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.241"Not RatedNot Rated100000000000000
    1 1/2"FHS-024-241 13/32"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.241"Not RatedNot Rated100000000000000
     
    10-32
    5/16"FHS-032-57/32"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated250000000000000
    3/8"FHS-032-69/32"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated250000000000000
    1/2"FHS-032-825/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated250000000000000
    5/8"FHS-032-1033/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated250000000000000
    3/4"FHS-032-1241/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated250000000000000
    7/8"FHS-032-1449/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated250000000000000
    1"FHS-032-1657/64"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated250000000000000
    1 1/4"FHS-032-201 5/32"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated100000000000000
    1 1/2"FHS-032-241 13/32"0.040"9/32"0.189"0.000" to 0.003"12 Ga.0.271"Not RatedNot Rated100000000000000
     
    1/4"-20
    3/8"FHS-0420-615/64"0.062"5/16"0.249"0.000" to 0.003"1/4"0.352"Not RatedNot Rated100000000000000
    1/2"FHS-0420-823/64"0.062"5/16"0.249"0.000" to 0.003"1/4"0.352"Not RatedNot Rated100000000000000
    5/8"FHS-0420-1031/64"0.062"5/16"0.249"0.000" to 0.003"1/4"0.352"Not RatedNot Rated250000000000000
    3/4"FHS-0420-1239/64"0.062"5/16"0.249"0.000" to 0.003"1/4"0.352"Not RatedNot Rated100000000000000
    7/8"FHS-0420-1447/64"0.062"5/16"0.249"0.000" to 0.003"1/4"0.352"Not RatedNot Rated100000000000000
    1"FHS-0420-1655/64"0.062"5/16"0.249"0.000" to 0.003"1/4"0.352"Not RatedNot Rated100000000000000
    1 1/4"FHS-0420-201 7/64"0.062"5/16"0.249"0.000" to 0.003"1/4"0.352"Not RatedNot Rated100000000000000
    1 1/2"FHS-0420-241 23/64"0.062"5/16"0.249"0.000" to 0.003"1/4"0.352"Not RatedNot Rated100000000000000
     
    5/16"-18
    1/2"FHS-0518 -811/32"0.093"3/8"0.311"0.000" to 0.003"N0.361"Not RatedNot Rated100000000000000
    5/8"FHS-0518-1015/32"0.093"3/8"0.311"0.000" to 0.003"N0.361"Not RatedNot Rated100000000000000
    3/4"FHS-0518-1219/32"0.093"3/8"0.311"0.000" to 0.003"N0.361"Not RatedNot Rated100000000000000
    7/8"FHS-0518-1423/32"0.093"3/8"0.311"0.000" to 0.003"N0.361"Not RatedNot Rated100000000000000
    1"FHS-0518-1627/32"0.093"3/8"0.311"0.000" to 0.003"N0.361"Not RatedNot Rated100000000000000
    1 1/4"FHS-0518-201 3/32"0.093"3/8"0.311"0.000" to 0.003"N0.361"Not RatedNot Rated50000000000000
    1 1/2"FHS-0518-241 11/32"0.093"3/8"0.311"0.000" to 0.003"N0.361"Not RatedNot Rated50000000000000
     
    M2.5 × 0.45 mm
    6 mmFHS-M2.5-64 mm1.000 mm5 mm2.5 mm0.000 mm to 0.08 mm2.5 mm3.7 mmNot RatedNot Rated250000000000000
    8 mmFHS-M2.5-86 mm1.000 mm5 mm2.5 mm0.000 mm to 0.08 mm2.5 mm3.7 mmNot RatedNot Rated250000000000000
    10 mmFHS-M2.5-108 mm1.000 mm5 mm2.5 mm0.000 mm to 0.08 mm2.5 mm3.7 mmNot RatedNot Rated250000000000000
    12 mmFHS-M2.5-1210 mm1.000 mm5 mm2.5 mm0.000 mm to 0.08 mm2.5 mm3.7 mmNot RatedNot Rated250000000000000
    15 mmFHS-M2.5-1513 mm1.000 mm5 mm2.5 mm0.000 mm to 0.08 mm2.5 mm3.7 mmNot RatedNot Rated250000000000000
     
    M3 × 0.5 mm
    6 mmFHS-M3-64 mm1.000 mm5.5 mm3 mm0.000 mm to 0.08 mm3.0 mm4.2 mmNot RatedNot Rated250000000000000
    8 mmFHS-M3-86 mm1.000 mm5.5 mm3 mm0.000 mm to 0.08 mm3.0 mm4.2 mmNot RatedNot Rated250000000000000
    10 mmFHS-M3-108 mm1.000 mm5.5 mm3 mm0.000 mm to 0.08 mm3.0 mm4.2 mmNot RatedNot Rated500000000000000
    12 mmFHS-M3-1210 mm1.000 mm5.5 mm3 mm0.000 mm to 0.08 mm3.0 mm4.2 mmNot RatedNot Rated250000000000000
    15 mmFHS-M3-1513 mm1.000 mm5.5 mm3 mm0.000 mm to 0.08 mm3.0 mm4.2 mmNot RatedNot Rated250000000000000
    18 mmFHS-M3-1816 mm1.000 mm5.5 mm3 mm0.000 mm to 0.08 mm3.0 mm4.2 mmNot RatedNot Rated250000000000000
    20 mmFHS-M3-2018 mm1.000 mm5.5 mm3 mm0.000 mm to 0.08 mm3.0 mm4.2 mmNot RatedNot Rated100000000000000
    25 mmFHS-M3-2523 mm1.000 mm5.5 mm3 mm0.000 mm to 0.08 mm3.0 mm4.2 mmNot RatedNot Rated100000000000000
     
    M4 × 0.7 mm
    6 mmFHS-M4-64 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm4.0 mm5.5 mmNot RatedNot Rated250000000000000
    8 mmFHS-M4-86 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm4.0 mm5.5 mmNot RatedNot Rated250000000000000
    10 mmFHS-M4-108 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm4.0 mm5.5 mmNot RatedNot Rated250000000000000
    12 mmFHS-M4-1210 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm4.0 mm5.5 mmNot RatedNot Rated250000000000000
    15 mmFHS-M4-1513 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm4.0 mm5.5 mmNot RatedNot Rated250000000000000
    18 mmFHS-M4-1816 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm4.0 mm5.5 mmNot RatedNot Rated250000000000000
    20 mmFHS-M4-2018 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm4.0 mm5.5 mmNot RatedNot Rated250000000000000
    25 mmFHS-M4-2523 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm4.0 mm5.5 mmNot RatedNot Rated250000000000000
    35 mmFHS-M4-3533 mm1.000 mm7 mm4 mm0.000 mm to 0.08 mm4.0 mm5.5 mmNot RatedNot Rated100000000000000
     
    M5 × 0.8 mm
    8 mmFHS-M5-85 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.1 mmNot RatedNot Rated100000000000000
    10 mmFHS-M5-107 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.1 mmNot RatedNot Rated250000000000000
    12 mmFHS-M5-129 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.1 mmNot RatedNot Rated250000000000000
    15 mmFHS-M5-1512 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.1 mmNot RatedNot Rated250000000000000
    18 mmFHS-M5-1815 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.1 mmNot RatedNot Rated250000000000000
    20 mmFHS-M5-2017 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.1 mmNot RatedNot Rated250000000000000
    25 mmFHS-M5-2522 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.1 mmNot RatedNot Rated250000000000000
    30 mmFHS-M5-3027 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.1 mmNot RatedNot Rated100000000000000
    35 mmFHS-M5-3532 mm1.000 mm7 mm5 mm0.000 mm to 0.08 mm5.0 mm6.1 mmNot RatedNot Rated100000000000000
     
    M6 × 1 mm
    10 mmFHS-M6-107 mm1.600 mm8 mm6 mm0.000 mm to 0.08 mm6.0 mm7.8 mmNot RatedNot Rated250000000000000
    12 mmFHS-M6-129 mm1.600 mm8 mm6 mm0.000 mm to 0.08 mm6.0 mm7.8 mmNot RatedNot Rated100000000000000
    15 mmFHS-M6-1512 mm1.600 mm8 mm6 mm0.000 mm to 0.08 mm6.0 mm7.8 mmNot RatedNot Rated100000000000000
    18 mmFHS-M6-1815 mm1.600 mm8 mm6 mm0.000 mm to 0.08 mm6.0 mm7.8 mmNot RatedNot Rated100000000000000
    20 mmFHS-M6-2017 mm1.600 mm8 mm6 mm0.000 mm to 0.08 mm6.0 mm7.8 mmNot RatedNot Rated100000000000000
    25 mmFHS-M6-2522 mm1.600 mm8 mm6 mm0.000 mm to 0.08 mm6.0 mm7.8 mmNot RatedNot Rated100000000000000
    30 mmFHS-M6-3027 mm1.600 mm8 mm6 mm0.000 mm to 0.08 mm6.0 mm7.8 mmNot RatedNot Rated100000000000000
    35 mmFHS-M6-3532 mm1.600 mm8 mm6 mm0.000 mm to 0.08 mm6.0 mm7.8 mmNot RatedNot Rated100000000000000
     
    M8 × 1.25 mm
    15 mmFHS-M8-1511 mm2.400 mm9.5 mm8 mm0.000 mm to 0.08 mm8.0 mm9.2 mmNot RatedNot Rated100000000000000
    18 mmFHS-M8-1814 mm2.400 mm9.5 mm8 mm0.000 mm to 0.08 mm8.0 mm9.2 mmNot RatedNot Rated100000000000000
    20 mmFHS-M8-2016 mm2.400 mm9.5 mm8 mm0.000 mm to 0.08 mm8.0 mm9.2 mmNot RatedNot Rated100000000000000
    25 mmFHS-M8-2521 mm2.400 mm9.5 mm8 mm0.000 mm to 0.08 mm8.0 mm9.2 mmNot RatedNot Rated100000000000000
    30 mmFHS-M8-3026 mm2.400 mm9.5 mm8 mm0.000 mm to 0.08 mm8.0 mm9.2 mmNot RatedNot Rated50000000000000
     

    Weld Studs
    3D CAD models available

    Image of Product. Front orientation. Studs. Weld Studs.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Below-Head Projection.
    Image of Specification. Back orientation. ZoomedIn view. Contains Border. Above-Head Projection.

    Below-Head

    Projection

    Above-Head

    Projection

    Weld in place for greater rigidity and strength than other studs. These studs have a wide base that distributes the load and projections that concentrate the weld. Length listed is overall length.
    Steel—Without a finish, these studs require minimal prep work before welding. After installation, you can paint them for a finished look.
    Below-Head Projection—Choose these studs for a strong hold that uses the full strength of the fastener. Pass through a hole and weld them in place.
    Above-Head Projection—Weld the head directly to the surface of the material for a smooth appearance.
    Base
    Lg.
    Projection
    Location
    Dia.
    Thk.
    Tensile Strength,
    psi
    Hardness
    Pkg.
    Qty.
    Pkg.
    Steel
     
    6-32
    1/2"Below Head0.323"0.052"60,000Not Rated10000000000000000
    5/8"Below Head0.323"0.052"60,000Not Rated1000000000000000
    3/4"Below Head0.323"0.052"60,000Not Rated1000000000000000
     
    8-32
    3/8"Below Head0.385"0.068"60,000Not Rated1000000000000000
    3/8"Above Head0.323"0.052"60,000Not Rated1000000000000000
    1/2"Below Head0.385"0.068"60,000Not Rated1000000000000000
    3/4"Below Head0.385"0.068"60,000Not Rated1000000000000000
    1"Below Head0.385"0.068"60,000Not Rated1000000000000000
     
    10-24
    3/8"Below Head0.448"0.068"60,000Not Rated1000000000000000
    3/8"Above Head0.385"0.068"60,000Not Rated1000000000000000
    1/2"Below Head0.448"0.068"60,000Not Rated1000000000000000
    1/2"Above Head0.385"0.068"60,000Not Rated1000000000000000
    5/8"Below Head0.448"0.068"60,000Not Rated10000000000000000
    3/4"Below Head0.448"0.068"60,000Not Rated10000000000000000
    3/4"Above Head0.385"0.068"60,000Not Rated10000000000000000
    1"Below Head0.448"0.068"60,000Not Rated10000000000000000
    1 1/4"Below Head0.448"0.068"60,000Not Rated10000000000000000
     
    10-32
    3/8"Below Head0.448"0.068"60,000Not Rated1000000000000000
    1/2"Below Head0.448"0.068"60,000Not Rated1000000000000000
    1/2"Above Head0.385"0.068"60,000Not Rated1000000000000000
    5/8"Below Head0.448"0.068"60,000Not Rated1000000000000000
    5/8"Above Head0.385"0.068"60,000Not Rated10000000000000000
    3/4"Below Head0.448"0.068"60,000Not Rated10000000000000000
    3/4"Above Head0.385"0.068"60,000Not Rated10000000000000000
    1"Below Head0.448"0.068"Not RatedNot Rated500000000000000
    1"Above Head0.385"0.068"60,000Not Rated10000000000000000
     
    1/4"-20
    3/8"Below Head0.575"0.083"Not RatedNot Rated500000000000000
    3/8"Above Head0.51"0.083"60,000Not Rated500000000000000
    1/2"Below Head0.575"0.083"Not RatedNot Rated500000000000000
    1/2"Above Head0.51"0.083"60,000Not Rated500000000000000
    5/8"Below Head0.575"0.083"Not RatedNot Rated500000000000000
    5/8"Above Head0.51"0.083"60,000Not Rated500000000000000
    3/4"Below Head0.575"0.083"Not RatedNot Rated5000000000000000
    3/4"Above Head0.51"0.083"60,000Not Rated500000000000000
    7/8"Below Head0.575"0.083"60,000Not Rated2500000000000000
    1"Below Head0.575"0.083"Not RatedNot Rated5000000000000000
    1"Above Head0.51"0.083"60,000Not Rated5000000000000000
    1 1/4"Below Head0.575"0.083"60,000Not Rated250000000000000
    1 1/2"Below Head0.575"0.083"60,000Not Rated250000000000000
    1 3/4"Below Head0.575"0.083"60,000Not Rated250000000000000
    2"Below Head0.575"0.083"60,000Not Rated2500000000000000
     
    5/16"-18
    3/4"Below Head0.755"0.099"60,000Not Rated2500000000000000
    3/4"Above Head0.63"0.099"60,000Not Rated50000000000000
    1"Below Head0.755"0.099"60,000Not Rated50000000000000
    1 1/4"Below Head0.755"0.099"60,000Not Rated2500000000000000
    2"Below Head0.755"0.099"60,000Not Rated500000000000000
     
    3/8"-16
    1"Below Head0.88"0.114"60,000Not Rated100000000000000
    1 1/4"Below Head0.88"0.114"60,000Not Rated50000000000000
    1 1/2"Below Head0.88"0.114"60,000Not Rated100000000000000
    1 3/4"Below Head0.88"0.114"60,000Not Rated100000000000000
     
    1/2"-13
    1 1/4"Below Head1.005"0.146"60,000Not Rated500000000000000
     
    M3.5
    8 mmAbove Head7 mm1.1 mmNot RatedNot Rated100000000000000
    25 mmAbove Head7 mm1.1 mmNot RatedNot Rated100000000000000
     
    M4
    6 mmAbove Head8 mm1.2 mmNot RatedNot Rated100000000000000
    8 mmAbove Head8 mm1.2 mmNot RatedNot Rated100000000000000
    10 mmAbove Head8 mm1.2 mmNot RatedNot Rated100000000000000
     

    90° Angle Weld Studs
    3D CAD models available

    Image of Attribute. Front orientation. Contains Annotated. Studs. 90° Angle Weld Studs.
    Weld these studs to flat surfaces in confined areas, narrow channels, and tight corners.
    Steel—Without a finish, these studs require minimal prep work before welding. After installation, you can paint them for a finished look.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these studs resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    Base
    Lg.
    Lg.
    Wd.
    Thk.
    Tensile
    Strength
    Hardness
    Pkg.
    Qty.
    Pkg.
    Steel
     
    6-32
    1/2"9/16"7/32"3/64"Not RatedNot Rated50000000000000000
     
    8-32
    1/2"5/8"1/4"1/16"Not RatedNot Rated5000000000000000
     
    10-24
    1/2"11/16"5/16"1/16"Not RatedNot Rated5000000000000000
     
    10-32
    1/2"11/16"11/32"1/16"Not RatedNot Rated5000000000000000
     
    1/4"-20
    1/2"3/4"3/8"3/32"Not RatedNot Rated250000000000000
    5/8"3/4"3/8"3/32"Not RatedNot Rated250000000000000
    3/4"3/4"3/8"3/32"Not RatedNot Rated250000000000000
    1"3/4"3/8"3/32"Not RatedNot Rated2500000000000000
     
    18-8 Stainless Steel
     
    6-32
    3/8"9/16"7/32"3/64"Not RatedNot Rated2500000000000000
    1/2"9/16"7/32"3/64"Not RatedNot Rated2500000000000000
     
    8-32
    3/8"5/8"1/4"1/16"Not RatedNot Rated2500000000000000
    1/2"5/8"1/4"1/16"Not RatedNot Rated2500000000000000
    5/8"5/8"1/4"1/16"Not RatedNot Rated100000000000000
    3/4"5/8"1/4"1/16"Not RatedNot Rated100000000000000
    1"5/8"1/4"1/16"Not RatedNot Rated100000000000000
    1 1/4"5/8"1/4"1/16"Not RatedNot Rated100000000000000
    1 1/2"5/8"1/4"1/16"Not RatedNot Rated100000000000000
     
    10-24
    3/8"11/16"5/16"1/16"Not RatedNot Rated100000000000000
    1/2"11/16"5/16"1/16"Not RatedNot Rated100000000000000
    3/4"11/16"5/16"1/16"Not RatedNot Rated100000000000000
    1"11/16"5/16"1/16"Not RatedNot Rated100000000000000
    1 1/4"11/16"5/16"1/16"Not RatedNot Rated100000000000000
     
    10-32
    3/8"11/16"11/32"1/16"Not RatedNot Rated100000000000000
    1/2"11/16"11/32"1/16"Not RatedNot Rated100000000000000
    3/4"11/16"11/32"1/16"Not RatedNot Rated100000000000000
    1"11/16"11/32"1/16"Not RatedNot Rated100000000000000
    1 1/4"11/16"11/32"1/16"Not RatedNot Rated1000000000000000
    1 3/4"11/16"11/32"1/16"Not RatedNot Rated1000000000000000
     
    1/4"-20
    1/2"3/4"3/8"3/32"Not RatedNot Rated1000000000000000
    5/8"3/4"3/8"3/32"Not RatedNot Rated1000000000000000
    3/4"3/4"3/8"3/32"Not RatedNot Rated1000000000000000
    7/8"3/4"3/8"3/32"Not RatedNot Rated1000000000000000
    1"3/4"3/8"3/32"Not RatedNot Rated50000000000000
    1 1/4"3/4"3/8"3/32"Not RatedNot Rated50000000000000
    1 1/2"3/4"3/8"3/32"Not RatedNot Rated50000000000000
    1 3/4"3/4"3/8"3/32"Not RatedNot Rated50000000000000
     
    5/16"-18
    5/8"7/8"7/16"1/8"Not RatedNot Rated50000000000000
    3/4"7/8"7/16"1/8"Not RatedNot Rated50000000000000
    1"7/8"7/16"1/8"Not RatedNot Rated50000000000000
    1 1/4"7/8"7/16"1/8"Not RatedNot Rated50000000000000
    1 1/2"7/8"7/16"1/8"Not RatedNot Rated500000000000000
    2"7/8"7/16"1/8"Not RatedNot Rated500000000000000
     
    3/8"-16
    1"1"17/32"5/32"Not RatedNot Rated500000000000000
    1 1/4"1"17/32"5/32"Not RatedNot Rated500000000000000
    1 1/2"1"17/32"5/32"Not RatedNot Rated500000000000000
     
    back to top