Keep the cover closed during operation to completely shield the outlet and plug from rain, snow, and wet conditions.

Close off unused outlets.

These corrosion-resistant boxes are built to withstand exposure to rain, snow, and wet conditions.

Close off unused outlets.

Mount these boxes to the outside of an enclosure to access a programmable logic controller or other networked device without opening the enclosure.

Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components. Enclosures are made of nonconductive polycarbonate that resists denting, chipping, and cracking.

These enclosures have thicker walls than standard aluminum enclosures, but are still a lightweight yet durable alternative to stainless steel.

PVC enclosures are nonconductive and chemical resistant, withstanding solvents, alkalies, and acids.

With a hygienic design, these enclosures minimize spots where food, debris, and water could collect after washdowns. Use them to house and mount switches, buttons, and other components in sanitary environments.

Made of polycarbonate, these enclosures resist denting, chipping, and cracking.

View all sides of your installed components.

Mounting feet make attachment to machines and walls hassle-free. These enclosures are small and lightweight for use with sensors, switches, testing devices, and circuit boards.

Mounting feet make attachment to machines and walls hassle-free.

Protect electronics from washdowns in food plants and other sanitary environments. These enclosures mount directly into walls to protect wiring and reduce the surface area that needs to be cleaned. Standard-size push-button holes are already installed, saving you the effort of measuring and cutting holes yourself.

Protect electronics from washdowns in food plants and other sanitary environments. These enclosures have standard-size push-button holes, saving you the effort of measuring and cutting holes yourself. A shroud hangs over the holes to guard buttons from damage and accidental pushing.

Made of polycarbonate, these enclosures resist denting, chipping, and cracking better than stainless steel enclosures.

Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components.

Able to withstand periodic submersion in water, these enclosures offer our highest level of protection from liquids. They’re made of fiberglass to resist impact and corrosion from solvents, alkalis, and mild acids.

Attach these enclosures to machine panels and walls by their mounting feet—no need to open the cover and expose sensors, switches, and other electronics in wet locations. Made of aluminum, they’re lighter in weight than stainless steel yet resist rusting from water.

Made of nonconductive polycarbonate, these enclosures withstand prolonged submersion in water while protecting electronics from dents, chips, and cracks. A clear cover lets you monitor the inside without opening them.

Inspect components without opening the cover.

Holes in the cover allow easy installation of push buttons, switches, and indicating lights.

Made of aluminum, these enclosures resist corrosion from rain, sleet, and snow. While not as corrosion resistant as stainless steel, aluminum is lighter for better mobility, and also easier to machine for custom mounting.

Mounted horizontally, such as on machinery or rooftops, these enclosures protect wiring and other electrical components from rain, snow, and ice thanks to their overhanging top.

These enclosures are rated NEMA 4 for protection from dirt and washdowns.

Control access to these enclosures with a key-operated lock.

With standard-size, evenly spaced, aligned push-button holes, these washdown enclosures save you the time and effort of cutting those holes yourself.

Two separate chambers allow you to access wiring connections in the lower section without disturbing components that you install in the upper section.

Make your push buttons, switches, and indicating lights more visible and ergonomic to use. Enclosures mount on either of two sides, creating a 30° or 60° slanted surface.

Suitable for installing in the ground or for use in wet environments, these direct burial enclosures are rated NEMA 6P for protection from dirt, washdowns, corrosion, and water submersion.

Often used to house emergency-stop buttons, switches, and lights, these bright yellow enclosures are easy to spot, even in dimly lit areas. All have standard-size push-button holes to save time—no need to measure and cut your own holes.

With internal slots and external fins, these enclosures hold circuit boards securely and dissipate heat to keep electronics from overheating.

These enclosures reduce electromagnetic interference (EMI) and radio frequency interference (RFI), which can cause electrical problems like flickering monitors, interrupted data signals, and unwanted radio noise.

The unique shape of these enclosures provides a handle to hold scanners, detectors, and remote switches.

These freestanding enclosures have a gasketed door with clamps to ensure a watertight seal. They are rated NEMA 4 and 13 for protection from dirt, washdowns, and oil/coolant spraying.

A rubber seal in the lid keeps water out.

Snap the lid closed on all sides to create an airtight and watertight seal.

Add valuable storage space with these weather- and rust-resistant sheds.