For light duty spray-down applications, attach these wash guns to any standard garden hose.

With a high maximum pressure and quick-disconnect nozzle connection, these wash guns work with pressure washers and high-pressure spray systems and it’s easy to swap out their nozzles.

Connect these guns to your garden hose and automatically dispense solution from the attached bottle instead of dragging around a siphon hose.

Clean hard-to-access areas by extending the reach of your quick-disconnect wash gun.

Connect these cleaners to existing steam lines to remove dirt, grease, and heavy oils from most surfaces.

Combine the power of steam and detergent—siphon detergent from a drum and use the control panel to regulate the steam/detergent mixture and change the temperature and flow rate.

Spray a precise, concentrated, high-velocity stream longer distances than flat spray nozzles to handle tough cleaning applications.

Push the nozzle out for lower pressures and pull it back for higher pressures. Turn the cover to adjust the spray angle from 0° to 25° or 75°.

Spray a precise, concentrated, high-velocity stream longer distances than flat spray nozzles to handle tough cleaning applications.

Instead of swapping between nozzles, turn the cover on these nozzles to change their spray angle. They have quick-disconnect couplings for easy detachment.

These nozzles produce a flat, thin spray pattern.

These nozzles produce a flat, thin spray pattern. They're good for general cleaning, washing, etching, foam control, and applying coatings.

Spray is deflected at a narrow angle to create the highest impact of all our flat spray nozzles.

Drill a hole anywhere along a pipe and snap on these nozzles. Spray tips can be quickly and easily removed for cleaning and replacement.

These nozzles have replaceable tips that are removable with a quarter-turn.

The large square coverage area makes these nozzles a good choice for chemical processing as well as for cooling applications.

Particles in liquid won’t clog these nozzles because of their unique internal and external design.

These nozzles project their spray at a right angle from their threaded connection.

Drill a hole anywhere along a pipe and snap on these nozzles. Spray tips can be quickly and easily removed for cleaning and replacement.

Mixing compressed air and liquid together, these nozzles create an ultra-fine, uniform spray without using high pressures. Also known as air-atomizing nozzles, they make droplets that are less than half the size of other fogging nozzles.

Create small, atomized spray droplets for cooling, moistening, and humidifying applications. These nozzles have a check valve that prevents dripping when they’re turned off

A check valve prevents the nozzle from dripping when it is turned off.

Fogging nozzles provide smaller, more atomized spray droplets than misting nozzles.

Certified by 3-A to meet sanitary design standards, these nozzles have a 360° spray pattern to effectively rinse tanks and vessels in food, beverage, and pharmaceutical environments.

By circulating their spray, these nozzles clean faster with more even coverage and less water than stationary tank-washing nozzles.

Internal gears create controlled motion as fluid moves through these nozzles, maintaining speed and producing large droplets to efficiently clean heavily soiled or large-diameter tanks.