The included hose is ready to connect to your air supply.

These guns include a rubber tip that won't damage your workpiece.

Also known as air-shield and safety-shield blowguns, an outer air curtain deflects flying chips and dust while the center airstream blows away debris.

The lightweight plastic construction makes these blowguns more comfortable to hold than metal.

Compact enough to carry with you, these guns have a built-in quick-disconnect hose coupling for easy connection to an air line.

Also known as air-shield and safety-shield blowguns, a center airstream blows away debris while an outer air curtain deflects flying chips and dust.

Operate a blowgun without disconnecting your air tool—these guns fit between the tool and air hose. Good for blowing away debris after using an air-powered sander or grinder.

Increase your reach with the telescoping nozzle.

Maximize comfort and minimize strain with these lightweight guns.

The most powerful blowguns we sell, these use compressed air to clean and blow debris.

Air flows out of the side of the nozzle to clean air filters, radiators, and inside recesses.

Blow air backward from the nozzle to clean out the inside of pipes, tubes, and channels without pushing debris into your system.

A nonconductive plastic nozzle and tip protect against accidental contact with live electrical circuits. These blowguns are tested to 1,000 volts to meet IEC 60900.

These guns provide more than three times the airflow of standard static-eliminating blowguns.

Clean surfaces without transferring dust or moisture from the air hose. These blowguns have a replaceable filter that traps particles such as rust and smoke and absorbs moisture.

Extend these telescoping nozzles to increase your reach.

These durable wash guns are typically used for frequent washdowns and cleanup.

Clean hard-to-access areas by extending the reach of your quick-disconnect wash gun.

Connect these guns to your garden hose and automatically dispense solution from the attached bottle instead of dragging around a siphon hose.

The powerful combination of air and water creates a high-velocity, atomized spray without needing high pressure. These guns also can be used to siphon.

Combine the power of steam and detergent—siphon detergent from a drum and use the control panel to regulate the steam/detergent mixture and change the temperature and flow rate.

The spray is deflected at a steep angle to produce a low-impact, extra-wide spray.

A quick-disconnect hose fitting on these nozzles means you can remove and replace them easily to change spray patterns and angles.

A check valve prevents the nozzle from dripping when it is turned off. Spray tips can be removed for cleaning and replacement.

These nozzles project their spray at a right angle from their threaded connection.

A low flow rate makes these nozzles good for distributing fluids, cooling, washing, and rinsing.

Spray a precise, concentrated, high-velocity stream longer distances than other spray patterns to handle tough cleaning applications.

The large square coverage area makes these nozzles a good choice for chemical processing as well as for cooling applications.

These nozzles project their spray at a right angle from their threaded connection.

Certified by 3-A to meet sanitary design standards, these nozzles have a 360° spray pattern to effectively rinse tanks and vessels in food, beverage, and pharmaceutical environments.

Use these nozzles with detergent that’s diluted in water to create a rotating, multi-directional foam spray for effectively rinsing tanks, drums, and small vessels.

Internal gears create controlled motion as fluid moves through these nozzles, maintaining speed and producing large droplets to efficiently clean heavily soiled or large-diameter tanks.

Spray a precise, concentrated, high-velocity stream longer distances than flat spray nozzles to handle tough cleaning applications.

Push the nozzle out for lower pressures and pull it back for higher pressures. Turn the cover to adjust the spray angle from 0° to 25° or 75°.

Combining rotation with a solid stream, these nozzles spray in a 25° hollow cone shape to cover a wide area. They’re easy to remove thanks to their quick-disconnect hose connection.

These nozzles produce a flat, thin spray pattern.

Instead of swapping between nozzles, turn the cover on these nozzles to change their spray angle. They have quick-disconnect couplings for easy detachment.

Mixing compressed air and liquid together, these nozzles create an ultra-fine, uniform spray without using high pressures. Also known as air-atomizing nozzles, they make droplets that are less than half the size of other fogging nozzles.

These nozzles provide a uniform distribution of droplets.

A wide spray angle provides a larger coverage area and produces a finer, more atomized spray than full-cone nozzles.

Fogging nozzles provide smaller, more atomized spray droplets than misting nozzles.