Push/Pull Toggle Clamps
Hold workpieces from the side.
Push/pull clamps secure in two positions—when the plunger is fully extended and when the plunger is fully retracted. They have an internally threaded plunger to accommodate threaded holding screws and other threaded fixtures (not included).
Pull-only clamps secure when the plunger is fully retracted. The externally threaded plunger can be threaded into a fixture with a tapped hole.
Stainless steel clamps have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Clamps | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Plunger | When Clamped | Replacement Handle Grips | |||||||||||||||
| Holding Cap., lbs. | Lg. | Ht. | Travel | Shape | Dia. | Wd. | Adjustment Lg. | Threading | Thread Size  | Thread Lg. | O'all Ht. | O'all Lg. | Grip Style | Each | Each | ||
Push/Pull—Steel | |||||||||||||||||
| 300 | 1 7/8" | 1" | 1 1/4" | Round | 7/16" | __ | __ | Internal | 5/16"-18 | 1" | 3 1/4" | 5 15/32" | Cushion | 0000000 | 000000 | 000000 | 00 |
| 300 | 2" | 1" | 1 1/4" | Round | 7/16" | __ | __ | Internal | 5/16"-18 | 1" | 3 9/32" | 5 15/32" | Cushion | 0000000 | 00000 | 000000 | 00 |
| 600 | 1 1/4" | 1" | 1 1/4" | Round | 7/16" | __ | __ | Internal | 5/16"-18 | 1" | 3 7/16" | 4 25/32" | Cushion | 0000000 | 00000 | 00000000 | 00000 |
| 800 | 1 3/4" | 11/16" | 1 5/8" | Round | 1/2" | __ | __ | Internal | 5/16"-18 | 1" | 3 1/2" | 6" | Cushion | 0000000 | 00000 | 000000 | 00 |
| 800 | 1 3/4" | 11/16" | 1 5/8" | Square | __ | 1/2" | __ | Internal | 5/16"-18 | 1" | 3 1/2" | 6" | Cushion | 0000000 | 00000 | 000000 | 00 |
| 800 | 2 1/2" | 1 11/16" | 1 5/8" | Round | 5/8" | __ | __ | Internal | 3/8"-16 | 1 1/4" | 4 13/32" | 6 23/32" | Cushion | 0000000 | 00000 | 000000 | 00 |
| 850 | 1 5/8" | 1 1/4" | 1 5/8" | Round | 5/8" | __ | __ | Internal | 3/8"-16 | 1 1/4" | 4 1/32" | 6" | Cushion | 0000000 | 00000 | 000000 | 00 |
| 2,500 | 2" | 13/16" | 2" | Round | 5/8" | __ | __ | Internal | 3/8"-16 | 1 1/4" | 3 1/16" | 7 1/16" | Cushion | 0000000 | 00000 | 000000 | 00 |
| 7,500 | 4 1/8" | 1 1/4" | 4" | Round | 7/8" | __ | __ | Internal | 1/2"-13 | 2" | 4 9/32" | 12 21/32" | Cushion | 0000000 | 000000 | 000000 | 00 |
| 16,000 | 3 3/8" | 2 1/4" | 3" | Round | 1" | __ | __ | Internal | 5/8"-11 | 2" | 4 27/32" | 11 5/32" | Plain | 0000000 | 000000 | 000000 | 00 |
Push/Pull—316 Stainless Steel | |||||||||||||||||
| 800 | 1 1/4" | 1" | 1 1/4" | Round | 1/2" | __ | __ | Internal | 5/16"-18 | 1" | 3 9/32" | 4 11/16" | Cushion | 0000000 | 00000 | 00000000 | 0000 |
Pull Only—Steel | |||||||||||||||||
| 1,200 | 3 3/4" | 3/4" | 3" | Round | 5/16" | __ | 11/32" | External | 5/16"-24 | 3 3/4" | 1 1/8" | 10 1/8" | Cushion | 0000000 | 00000 | 000000 | 00 |
| 2,000 | 2 7/8" | 1 1/2" | 2 1/2" | Round | 3/8" | __ | 9/16" | External | 3/8"-24 | 2 7/8" | 1 7/8" | 11 3/8" | Cushion | 0000000 | 00000 | 000000 | 00 |
| 4,000 | 6 1/8" | 1 1/2" | 4" | Round | 5/8" | __ | 1 1/4" | External | 5/8"-18 | 6 1/8" | 2 3/8" | 18 1/16" | Cushion | 0000000 | 000000 | 000000 | 00 |
| 8,000 | 6 1/8" | 1 5/8" | 4" | Round | 5/8" | __ | 3/4" | External | 5/8"-18 | 6 1/8" | 2 1/2" | 17 3/8" | Cushion | 0000000 | 000000 | 000000 | 00 |
Clamps | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Plunger | When Clamped | Replacement Handle Grips | |||||||||||||
| Holding Cap., lbs. | Lg. | Ht. | Travel | Shape | Dia. | Threading | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | Grip Style | Each | Each | ||
Push/Pull—Steel | |||||||||||||||
| 300 | 1 15/16" | 1" | 1 1/4" | Round | 7/16" | Internal | M8 | 25 mm | 3 9/32" | 5 15/32" | Cushion | 0000000 | 000000 | 000000 | 00 |
| 550 | 1 1/8" | 5/16" | 1" | Round | 13/32" | Internal | M6 | 25 mm | 2 3/32" | 4 1/8" | Plain | 0000000 | 000000 | 000000 | 00 |
| 600 | 1 5/8" | 1" | 1 1/4" | Round | 7/16" | Internal | M8 | 25 mm | 3 7/16" | 4 25/32" | Cushion | 0000000 | 00000 | 00000000 | 00000 |
| 800 | 1 3/4" | 11/16" | 1 5/8" | Round | 1/2" | Internal | M8 | 25 mm | 3 1/2" | 6" | Cushion | 0000000 | 00000 | 000000 | 00 |
| 800 | 1 15/16" | 1 11/16" | 1 5/8" | Round | 5/8" | Internal | M10 | 32 mm | 4 13/32" | 6 23/32" | Cushion | 0000000 | 00000 | 000000 | 00 |
| 850 | 1 9/16" | 1 1/4" | 1 5/8" | Round | 5/8" | Internal | M10 | 32 mm | 4 1/32" | 6" | Cushion | 0000000 | 00000 | 000000 | 00 |
| 1,100 | 1 9/16" | 13/32" | 1 1/2" | Round | 9/16" | Internal | M8 | 35 mm | 3 1/32" | 5 7/8" | Plain | 0000000 | 000000 | 000000 | 00 |
| 1,650 | 2" | 9/16" | 2" | Round | 3/4" | Internal | M12 | 55 mm | 3 1/32" | 7 15/32" | Plain | 0000000 | 000000 | 000000 | 00 |
| 3,960 | 2 7/16" | 5/8" | 2 3/8" | Round | 7/8" | Internal | M12 | 65 mm | 3 11/16" | 9 1/32" | Plain | 0000000 | 000000 | 000000 | 00 |
| 7,500 | 4 1/8" | 1 1/4" | 4" | Round | 7/8" | Internal | M12 | 51 mm | 4 9/32" | 12 21/32" | Cushion | 0000000 | 000000 | 000000 | 00 |
| 16,000 | 3 3/8" | 2 1/4" | 3" | Round | 1" | Internal | M16 | 51 mm | 4 27/32" | 11 5/32" | Plain | 0000000 | 000000 | 000000 | 00 |
Push/Pull—18-8 Stainless Steel | |||||||||||||||
| 800 | 1 1/4" | 1" | 1 1/4" | Round | 1/2" | Internal | M8 | 25 mm | 3 9/32" | 4 11/16" | Cushion | 0000000 | 00000 | 00000000 | 0000 |
Push Only—Steel | |||||||||||||||
| 2,500 | 2" | 13/16" | 2" | Round | 5/8" | Internal | M10 | 32 mm | 3 1/16" | 7 1/16" | Cushion | 0000000 | 00000 | 000000 | 00 |
Compact Push/Pull Toggle Clamps
Smaller than standard push/pull toggle clamps, these are often used for electronics and small fixturing applications. A pushing or pulling motion holds workpieces from the side. Clamps secure in two positions—when the plunger is fully extended and when the plunger is fully retracted.
Clamps with internally threaded plunger accommodate threaded holding screws and other threaded fixtures (not included).
Clamps with externally threaded plunger can be threaded into a fixture with a tapped hole.
Stainless steel clamps have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Plunger | When Clamped | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Lg. | Ht. | Travel | Dia. | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | Each | |
Internally Threaded Plunger—Steel | ||||||||||
| 100 | 1 1/4" | 1/2" | 5/8" | 1/4" | 8-32 | 1/2" | 1 1/4" | 2 5/8" | 0000000 | 000000 |
| 150 | 1 1/8" | 1/2" | 5/8" | 1/4" | 8-32 | 1/2" | 1 1/4" | 2 5/8" | 0000000 | 00000 |
| 550 | 11/16" | 1/2" | 11/16" | 3/8" | 1/4"-20 | 11/16" | 1 9/16" | 2 15/16" | 0000000 | 00000 |
Internally Threaded Plunger—18-8 Stainless Steel | ||||||||||
| 100 | 1 1/4" | 1/2" | 5/8" | 1/4" | 8-32 | 1/2" | 1 1/4" | 2 5/8" | 0000000 | 00000 |
| 150 | 1 1/8" | 1/2" | 5/8" | 1/4" | 8-32 | 1/2" | 1 1/4" | 2 5/8" | 0000000 | 00000 |
| 600 | 11/16" | 1/2" | 11/16" | 3/8" | 1/4"-20 | 11/16" | 1 9/16" | 2 15/16" | 0000000 | 00000 |
Externally Threaded Plunger—Steel | ||||||||||
| 100 | 1 1/2" | 1/2" | 5/8" | 1/4" | 1/4"-20 | 1/2" | 1 1/4" | 2 7/8" | 0000000 | 00000 |
Externally Threaded Plunger—18-8 Stainless Steel | ||||||||||
| 100 | 1 1/2" | 1/2" | 5/8" | 1/4" | 1/4"-20 | 1/2" | 1 1/4" | 2 7/8" | 0000000 | 00000 |
Plunger | When Clamped | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Lg. | Ht. | Travel | Dia. | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | Each | |
Internally Threaded Plunger—Steel | ||||||||||
| 100 | 1 1/4" | 1/2" | 5/8" | 1/4" | M4 | 12 mm | 1 1/4" | 2 5/8" | 0000000 | 000000 |
| 150 | 1 1/8" | 1/2" | 5/8" | 1/4" | M4 | 13 mm | 1 1/4" | 2 5/8" | 0000000 | 00000 |
| 560 | 11/16" | 1/2" | 11/16" | 3/8" | M6 | 19 mm | 1 9/16" | 2 15/16" | 0000000 | 00000 |
Internally Threaded Plunger—18-8 Stainless Steel | ||||||||||
| 150 | 1 1/8" | 1/2" | 5/8" | 1/4" | M4 | 13 mm | 1 1/4" | 2 5/8" | 0000000 | 00000 |
Internally Threaded Plunger—316 Stainless Steel | ||||||||||
| 560 | 11/16" | 1/2" | 11/16" | 3/8" | M6 | 19 mm | 1 9/16" | 2 15/16" | 0000000 | 00000 |
Reverse-Action Push Toggle Clamps
Pull the handle backward to push the plunger forward. These clamps secure when the plunger is fully extended to hold your workpiece from the side. The plunger is internally threaded to accommodate threaded holding screws and other threaded fixtures (not included).
For technical drawings and 3-D models, click on a part number.
Plunger | When Clamped | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Lg. | Ht. | Travel | Dia. | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | Body Material | Each | |
| 600 | 1 3/4" | 1 11/16" | 1 1/8" | 5/8" | M10 | 25 mm | 2 1/4" | 11 5/8" | Steel | 0000000 | 0000000 |
Heavy Duty Reverse-Action Push Toggle Clamps
A highly durable construction with hardened steel pivot pins and bushings provides a long service life. Pull the handle backward to push the plunger forward. These clamps secure when the plunger is fully extended to hold your workpiece from the side. The plunger is internally threaded to accommodate threaded holding screws and other threaded fixtures (not included).
For technical drawings and 3-D models, click on a part number.
Plunger | When Clamped | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Lg. | Ht. | Travel | Dia. | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | Body Material | Each | |
| 2,500 | 1 1/8" | 1 1/8" | 1" | 1/2" | 5/16"-18 | 1" | 2 1/2" | 7 5/8" | Steel | 000000 | 000000 |
| 4,600 | 3 1/4" | 1 3/8" | 3 1/8" | 3/4" | 1/2"-13 | 2" | 3 13/16" | 13 1/16" | Steel | 000000 | 00000 |
| 5,800 | 1 15/16" | 1 3/8" | 1 3/4" | 3/4" | 1/2"-13 | 2" | 3 5/8" | 11 1/8" | Steel | 000000 | 00000 |
Plunger | When Clamped | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Lg. | Ht. | Travel | Dia. | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | Body Material | Each | |
| 2,500 | 1 1/8" | 1 1/8" | 1" | 1/2" | M8 | 25 mm | 2 1/2" | 7 5/8" | Steel | 000000 | 000000 |
| 4,600 | 3 1/4" | 1 3/8" | 3 1/8" | 3/4" | M12 | 50 mm | 3 13/16" | 13 1/16" | Steel | 000000 | 00000 |
| 5,800 | 1 15/16" | 1 3/8" | 1 3/4" | 3/4" | M12 | 50 mm | 3 5/8" | 11 1/8" | Steel | 000000 | 00000 |
Auto-Adjusting Push Toggle Clamps
Hold workpieces of different thicknesses with one clamp. These clamps automatically adjust to compensate for variations in size. They secure when the plunger is fully extended to hold your workpiece from the side. The holding screw has a nonmarring tip.
For technical drawings and 3-D models, click on a part number.
Plunger | When Clamped | Holding Screws | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | For Max. Workpiece Variation | Lg. | Ht. | Travel | Dia. | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | No. Included | Tip Material | Thread Size | Body Material | Each | |
| 450 | 3/8" | 1 1/2" | 7/8" | 11/16" | 5/16" | M6 | 25 mm | 1 7/16" | 7" | 1 | Plastic | M5 | Steel | 0000000 | 000000 |
| 700 | 5/8" | 3" | 1" | 1" | 15/32" | M8 | 19 mm | 1 13/16" | 9 3/16" | 1 | Plastic | M6 | Steel | 0000000 | 00000 |
Push Toggle Clamps with Locking Handle
Push the lever to lock the handle and prevent accidental opening. These clamps secure when the plunger is fully extended to hold your workpiece from the side. The plunger is internally threaded to accommodate threaded holding screws and other threaded fixtures (not included).
For technical drawings and 3-D models, click on a part number.
Compact Push Toggle Clamps with Locking Handle
Smaller than standard push/pull toggle clamps, these are often used for electronics and small fixturing applications. Push the lever to lock the handle and prevent accidental opening. These clamps secure when the plunger is fully extended to hold your workpiece from the side. The plunger is internally threaded to accommodate threaded holding screws and other threaded fixtures (not included).
For technical drawings and 3-D models, click on a part number.
Plunger | When Clamped | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Lg. | Ht. | Travel | Dia. | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | Body Material | Each | |
| 560 | 11/16" | 1/2" | 11/16" | 3/8" | 1/4"-20 | 11/16" | 1 5/8" | 3" | Steel | 0000000 | 000000 |
Plunger | When Clamped | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Lg. | Ht. | Travel | Dia. | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | Body Material | Each | |
| 560 | 3/4" | 1/2" | 3/4" | 3/8" | M6 | 19 mm | 1 5/8" | 3" | Steel | 0000000 | 000000 |
Covered Push/Pull Toggle Clamps
Moving parts are protected by a metal cover when the clamp is engaged to prevent dirt and dust from clogging the clamp. A pushing or pulling motion holds workpieces from the side. These clamps secure in two positions—when the plunger is fully extended and when the plunger is fully retracted. The plunger is internally threaded to accommodate threaded holding screws and other threaded fixtures (not included).
For technical drawings and 3-D models, click on a part number.
Plunger | When Clamped | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Lg. | Ht. | Travel | Dia. | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | Body Material | Each | |
| 800 | 2" | 7/8" | 1 1/4" | 3/8" | 1/4"-20 | 1/2" | 2 1/2" | 6 1/4" | Steel | 0000000 | 000000 |
Push Toggle Clamps with Rotating Handle
The handle can be rotated 125° for easier access or extra clearance above the clamp. These clamps secure when the plunger is fully extended to hold a workpiece from the side. The plunger is internally threaded to accommodate threaded holding screws and other threaded fixtures (not included).
For technical drawings and 3-D models, click on a part number.
Plunger | When Clamped | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Lg. | Ht. | Travel | Dia. | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | Body Material | Each | |
| 450 | 1 9/16" | 7/8" | 1 9/16" | 7/16" | 5/16"-18 | 1" | 2 7/16" | 6 3/4" | Steel | 0000000 | 000000 |
Plunger | When Clamped | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Lg. | Ht. | Travel | Dia. | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | Body Material | Each | |
| 450 | 1 9/16" | 7/8" | 1 9/16" | 7/16" | M8 | 25 mm | 2 7/16" | 6 3/4" | Steel | 0000000 | 000000 |
Hole-Mount Push/Pull Toggle Clamps
Panel mount through a hole with the included nut, or drill and tap a hole to flush mount. A pushing or pulling motion holds workpieces from the side. These clamps secure in two positions—when the plunger is fully extended and when the plunger is fully retracted. The plunger is internally threaded to accommodate threaded holding screws and other threaded fixtures (not included).
Stainless steel clamps have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Plunger | When Clamped | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Lg. | Travel | Dia. | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | Includes | Each | |
Steel | ||||||||||
| 200 | 1 5/16" | 3/4" | 3/8" | 1/4"-20 | 5/8" | 3 1/8" | 2 7/16" | Mounting Nut | 0000000 | 000000 |
| 300 | 2 3/16" | 1 1/2" | 7/16" | 5/16"-18 | 1" | 4 3/16" | 4 1/4" | Mounting Nut | 0000000 | 00000 |
| 450 | 2 1/4" | 1 1/2" | 1/2" | 5/16"-18 | 1" | 4 1/4" | 5 5/8" | Mounting Nut | 0000000 | 00000 |
| 700 | 3 5/8" | 2 5/8" | 5/8" | 3/8"-16 | 1 1/4" | 5 5/8" | 6 11/16" | Mounting Nut | 0000000 | 00000 |
18-8 Stainless Steel | ||||||||||
| 200 | 1 5/16" | 3/4" | 3/8" | 1/4"-20 | 5/8" | 3 1/8" | 2 7/16" | Mounting Nut | 0000000 | 00000 |
| 300 | 2 3/16" | 1 1/2" | 7/16" | 5/16"-18 | 1" | 4 3/16" | 4 1/4" | Mounting Nut | 0000000 | 00000 |
| 700 | 3 5/8" | 2 5/8" | 5/8" | 3/8"-16 | 1 1/4" | 5 5/8" | 6 11/16" | Mounting Nut | 0000000 | 000000 |
Plunger | When Clamped | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Lg. | Travel | Dia. | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | Includes | Each | |
Steel | ||||||||||
| 200 | 1 5/16" | 3/4" | 3/8" | M6 | 16 mm | 3 1/8" | 2 7/16" | Mounting Nut | 0000000 | 000000 |
| 300 | 2 3/16" | 1 1/2" | 7/16" | M8 | 25 mm | 4 3/16" | 4 1/4" | Mounting Nut | 0000000 | 00000 |
| 700 | 3 5/8" | 2 5/8" | 5/8" | M10 | 32 mm | 5 5/8" | 6 11/16" | Mounting Nut | 0000000 | 00000 |
18-8 Stainless Steel | ||||||||||
| 200 | 1 5/16" | 3/4" | 3/8" | M6 | 16 mm | 3 1/8" | 2 7/16" | Mounting Nut | 0000000 | 00000 |
| 400 | 2 3/16" | 1 1/2" | 7/16" | M8 | 25 mm | 4 3/16" | 4 1/4" | Mounting Nut | 0000000 | 00000 |
| 700 | 3 5/8" | 2 5/8" | 5/8" | M10 | 32 mm | 5 5/8" | 6 11/16" | Mounting Nut | 0000000 | 000000 |
Hole-Mount Push/Pull Toggle Clamps with Locking Handle
Push the lever to lock the handle and prevent accidental opening. Panel mount these clamps through a hole with the included nut, or drill and tap a hole to flush mount. They have an internally threaded plunger to accommodate threaded holding screws and other threaded fixtures (not included).
Push/pull clamps secure in two positions—when the plunger is fully extended and when the plunger is fully retracted.
Push-only clamps secure when the plunger is fully extended.
For technical drawings and 3-D models, click on a part number.
Rail-Mount Push/Pull Toggle Clamps
Mount these clamps to a rail or bar. A pushing or pulling motion holds workpieces from the side. Clamps secure in two positions—when the plunger is fully extended and when the plunger is fully retracted. The plunger is internally threaded to accommodate threaded holding screws and other threaded fixtures (not included).
For technical drawings and 3-D models, click on a part number.
Plunger | When Clamped | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Lg. | Ht. | Travel | Dia. | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | Body Material | Each | |
| 250 | 1 5/16" | 1 1/8" | 3/4" | 5/16" | 10-24 | 1/2" | 2 13/16" | 3 3/4" | Steel | 0000000 | 000000 |
| 500 | 1 9/16" | 1 7/16" | 1" | 5/16" | 10-24 | 1/2" | 3 15/16" | 4 3/4" | Steel | 0000000 | 00000 |
| 1,000 | 2 7/8" | 1 15/16" | 1 5/8" | 1/2" | 5/16"-18 | 1" | 5" | 7 13/16" | Steel | 0000000 | 00000 |
Adjustable-Travel Push/Pull Clamps
The plunger can be secured at any position along its travel. Push the plunger forward until it contacts the workpiece and then rotate the lever handle to clamp a workpiece from the side. These clamps have an internally threaded plunger to accommodate threaded holding screws and other threaded fixtures (not included).
For technical drawings and 3-D models, click on a part number.
Plunger | When Clamped | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Lg. | Ht. | Travel | Dia. | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | Body Material | Each | |
| 2,000 | 7 7/8" | 1 3/16" | 7 7/8" | 5/8" | M8 | 15 mm | 6 3/8" | 15" | Steel | 0000000 | 0000000 |
Hole-Mount Adjustable-Travel Push/Pull Clamps
Drill a hole to mount these clamps through a surface and secure the mounting flange with screws. The plunger can be locked at any position along its travel. Push the plunger forward until it contacts the workpiece and then rotate the lever handle to clamp a workpiece from the side. The plunger is internally threaded to accommodate threaded holding screws and other threaded fixtures (not included).
For technical drawings and 3-D models, click on a part number.
Plunger | When Clamped | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Lg. | Ht. | Travel | Dia. | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | Body Material | Each | |
| 600 | 7 7/8" | 7/8" | 7 7/8" | 1/2" | M6 | 12 mm | 5 1/8" | 13" | Steel | 0000000 | 0000000 |
Air-Powered Push Toggle Clamps
Use for repetitive clamping and in production environments. These clamps secure when the plunger is fully extended to hold a workpiece from the side. Air from one inlet port engages the clamp, and air from the other inlet port disengages it. Clamps maintain the full-rated holding capacity even with a loss of air pressure. They have a threaded plunger to accommodate threaded holding screws and other threaded fixtures (not included). Fittings (not included) are required to connect the clamp's ports to a control valve and an air line.
For technical drawings and 3-D models, click on a part number.
Plunger | When Clamped | Air Inlet and Outlet | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Holding Capacity, lbs. | Lg. | Ht. | Travel | Dia. | Thread Size | Thread Lg. | O'all Ht. | O'all Lg. | Max. Air Inlet Pressure, psi | Pipe Size | Thread Type | Gender | Temperature Range, °F | Body Material | Each | |
| 600 | 1 1/4" | 1 1/8" | 3/4" | 7/16" | 5/16"-18 | 1" | 3" | 9 7/8" | 60 | 1/8 | NPT | Female | -10° to 165° | Steel | 0000000 | 0000000 |
| 2,500 | 2" | 1 1/8" | 1 1/4" | 5/8" | 3/8"-16 | 1 1/4" | 3 5/8" | 13 1/2" | 145 | 1/8 | NPT | Female | -10° to 165° | Steel | 0000000 | 000000 |
| 16,000 | 3 3/8" | 2 5/8" | 2" | 1" | 5/8"-11 | 2" | 7 1/4" | 20 5/8" | 145 | 1/4 | NPT | Female | -10° to 165° | Steel | 0000000 | 000000 |