About Carbon Steel, Alloy Steel, Spring Steel, and Cast Iron
More
About Stainless Steel
More
About Aluminum
More
Architectural 6063 Aluminum H-Bars
![](/prerenderstable/mvPRE/contents/gfx/imagecache/455/4558t68c1-j01-digital-master1556746060-p9@halfx_636923305702502186.png?ver=imagenotfound)
- Yield Strength: 16,000 psi
- Hardness: Brinell 60 (Soft)
- Temper: T5
- Fabrication: Extruded
- Specifications Met: ASTM B221
More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Outside | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Ht. | Ht. Tolerance | Wd. | Inside Wd. | Heat Treatment | Temperature Range, °F | Straightness Tolerance | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
0.05" Wall Thick. (-0.008" to 0.008" Tolerance) | ||||||||||
1.000" | -0.024" to 0.024" | 1.950" | 1.85" | Hardened | -320° to 212° | 0.050" per ft. | 0000000 | |||
1.060" | -0.024" to 0.024" | 0.700" | 0.60" | Hardened | -320° to 212° | 0.050" per ft. | 0000000 | |||
1.074" | -0.024" to 0.024" | 1.040" | 0.94" | Hardened | -320° to 212° | 0.050" per ft. | 0000000 | |||
1.724" | -0.024" to 0.024" | 1.120" | 1.02" | Hardened | -320° to 212° | 0.050" per ft. | 0000000 | |||
0.055" Wall Thick. (-0.008" to 0.008" Tolerance) | ||||||||||
1.500" | -0.024" to 0.024" | 2.110" | 2.00" | Hardened | -320° to 212° | 0.050" per ft. | 0000000 | |||
0.062" Wall Thick. (-0.008" to 0.008" Tolerance) | ||||||||||
1.500" | -0.024" to 0.024" | 1.034" | 0.91" | Hardened | -320° to 212° | 0.050" per ft. | 0000000 | |||
0.094" Wall Thick. (-0.008" to 0.008" Tolerance) | ||||||||||
1.500" | -0.024" to 0.024" | 0.688" | 0.50" | Hardened | -320° to 212° | 0.050" per ft. | 0000000 | |||
1/8" Wall Thick. (-0.008" to 0.008" Tolerance) | ||||||||||
2.000" | -0.024" to 0.024" | 2.000" | 1.75" | Hardened | -320° to 212° | 0.050" per ft. | 0000000 | |||
0.188" Wall Thick. (-0.008" to 0.008" Tolerance) | ||||||||||
1.500" | -0.024" to 0.024" | 0.876" | 0.50" | Hardened | -320° to 212° | 0.050" per ft. | 0000000 | |||
0.2" Wall Thick. (-0.008" to 0.008" Tolerance) | ||||||||||
2.400" | -0.024" to 0.024" | 1.750" | 1.35" | Hardened | -320° to 212° | 0.050" per ft. | 0000000 | |||
1/4" Wall Thick. (-0.008" to 0.008" Tolerance) | ||||||||||
2.375" | -0.024" to 0.024" | 1.000" | 0.50" | Hardened | -320° to 212° | 0.050" per ft. | 0000000 |
Low-Carbon Steel H-Bars
![](/prerenderstable/mvPRE/contents/gfx/imagecache/455/4558t68c1-j01-digital-master1556746060-p9@halfx_636923305702502186.png?ver=imagenotfound)
- Yield Strength: 50,000 psi
- Hardness: Not Rated
- Heat Treatable: Yes
- Maximum Hardness After Heat Treatment: Not Rated
- Specifications Met: ASTM A992
Made of stiff low-carbon steel to deflect less under load, these H-bars are commonly used in machine bases, construction, platforms, and frames. Because of its rigidity, low-carbon steel is the most commonly used material for H-bars. These H-bars are less likely to crack from welding than those made of higher-carbon steels, and easier to weld than I-beams because they have a straight flange instead of a radius flange. H-bars are stronger than I-beams, but also heavier.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Outside | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Wall Thickness | Wall Thickness Tolerance | Height | Height Tolerance | Width | Width Tolerance | Inside Width | Minimum Temperature, °F | Straightness Tolerance | 3 ft., Lg. | 6 ft., Lg. | |
0.215" | Not Rated | 3.94" | -0.188" to 0.250" | 5.9" | -0.125" to 0.125" | 5.47" | Not Rated | 0.025" per ft. | 0000000 | ||
0.26" | Not Rated | 5.99" | -0.188" to 0.250" | 5.99" | -0.125" to 0.125" | 5.47" | Not Rated | 0.025" per ft. | 0000000 | ||
0.28" | Not Rated | 4" | -0.188" to 0.250" | 6.03" | -0.125" to 0.125" | 5.47" | Not Rated | 0.025" per ft. | 0000000 | ||
0.345" | Not Rated | 4.06" | -0.188" to 0.250" | 4.16" | -0.125" to 0.125" | 3.47" | Not Rated | 0.025" per ft. | 0000000 | ||
0.365" | Not Rated | 6.02" | -0.188" to 0.250" | 6.2" | -0.125" to 0.125" | 5.47" | Not Rated | 0.025" per ft. | 0000000 | ||
0.4" | Not Rated | 5.27" | -0.188" to 0.250" | 8.28" | -0.125" to 0.125" | 7.48" | Not Rated | 0.025" per ft. | 0000000 | ||
0.435" | Not Rated | 7.995" | -0.188" to 0.250" | 8" | -0.125" to 0.125" | 7.13" | Not Rated | 0.025" per ft. | 0000000 | ||
0.455" | Not Rated | 6.08" | -0.188" to 0.250" | 6.38" | -0.125" to 0.125" | 5.47" | Not Rated | 0.025" per ft. | 0000000 | ||
0.56" | Not Rated | 8.07" | -0.188" to 0.250" | 8.25" | -0.125" to 0.125" | 7.13" | Not Rated | 0.025" per ft. | 0000000 |
Multipurpose 304 Stainless Steel
From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications. It maintains its corrosion resistance in temperatures up to 1500° F.
Bars with sheared edges are also known as Gauer bar and are sheared from plate.
H-bars have larger flange widths and thicknesses than I-beams, so they’re stronger and carry heavier loads, yet also weigh more.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/775/7757n111--7df9f86582b1605556899-p9@halfx_637411321311031813.png?ver=imagenotfound)
- Yield Strength: 35,000 psi
- Hardness: Rockwell B80 (Medium)
- Heat Treatment: Annealed (Softened)
- Heat Treatable: No
- Specifications Met: ASTM A240
Outside | Corner Shape | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Inside Wd. | Fabrication | Edge Fabrication | Outside | Inside | Straightness Tolerance | 3 ft. Lg. | 6 ft. Lg. | |
0.26" Wall Thick. | ||||||||||||
5.99" | -1/8" to 1/8" | 5.99" | -0.188" to 1/4" | 5.47" | Welded | Sheared | Square | Square | 0.0625" per 6 ft. | 0000000 | ||
0.33" Wall Thick. | ||||||||||||
5 1/4" | -1/8" to 1/8" | 8.14" | -0.188" to 1/4" | 7.48" | Welded | Sheared | Square | Square | 0.0625" per 6 ft. | 0000000 | ||
0.345" Wall Thick. | ||||||||||||
4.06" | -1/8" to 1/8" | 4.16" | -0.188" to 1/4" | 3.47" | Welded | Sheared | Square | Square | 0.0625" per 6 ft. | 0000000 | ||
0.365" Wall Thick. | ||||||||||||
6.02" | -1/8" to 1/8" | 6.2" | -0.188" to 1/4" | 5.47" | Welded | Sheared | Square | Square | 0.0625" per 6 ft. | 0000000 | ||
0.4" Wall Thick. | ||||||||||||
6.495" | -1/8" to 1/8" | 7.93" | -0.188" to 1/4" | 7.13" | Welded | Sheared | Square | Square | 0.0625" per 6 ft. | 0000000 | ||
0.435" Wall Thick. | ||||||||||||
7.995" | -1/8" to 1/8" | 8" | -0.188" to 1/4" | 7.13" | Welded | Sheared | Square | Square | 0.0625" per 6 ft. | 0000000 |