We will reply to your message within an hour.
The plunger can be locked at any position along its travel.
Drill a hole to mount these clamps through a surface and secure the mounting flange with screws. The plunger can be locked at any position along its travel.
Push or pull the plunger to hold your workpiece from the side.
Smaller than standard push/pull toggle clamps, these are often used for electronics and small fixturing applications.
Moving parts are protected by a metal cover when the clamp is engaged to prevent dirt and dust from clogging the clamp.
Hold workpieces of different thicknesses without adjustment.
Smaller than standard push toggle clamps, these are often used for electronics and small fixturing applications.
Secure your workpiece from the side by fully extending the plunger, and push a lever to lock the handle in place.
A highly durable construction with hardened steel pivot pins and bushings provides a long service life.
Pull the handle backward to push the plunger forward. These clamps secure when the plunger is fully extended to hold your workpiece from the side.
The handle can be rotated 125° for easier access or extra clearance above the clamp.
Secure these clamps to a rail or bar.
Use for repetitive clamping and in production environments or hard-to-reach locations.
The handle locks in a horizontal position for more clearance above the clamp than standard hold-down toggle clamps.
Reduce the chance of getting pinched when unclamping. These clamps have more space between the handle and the arm than other low-profile toggle clamps.
Push the lever to lock the handle and prevent accidental opening.
Mount these clamps to a bench top or other surface to keep workpieces in place.
A nonreflective black oxide finish prevents glare that can interfere with machine vision systems.
Hold workpieces of slightly different thicknesses with one clamp. These clamps automatically adjust to compensate for imperfections or small inconsistencies on the material’s surface.
Often used when assembling small parts, these small clamps have the holding strength of a full-size clamp.
Bolt to the side of an object. Often used to clamp lids and covers on containers.
Two sets of mounting holes allow mounting on the bottom or side.
The handle locks in a horizontal position for more clearance above the clamp.
The mounting base secures these clamps to a rail or bar.
Mount these clamps below a surface.
Suitable for production applications, these clamps have double the service life of other air-powered toggle clamps.
These clamps have mounting holes on the bottom.
Mount the base to a work surface using screws.
Fit the draw arm over a latch plate and pull the handle to clamp.
Mount the clamp on a lid and the latch plate on the side of a container.